0…100 mbar or 0…1.5 psi pressure range, 0…10 V, 0…5 V, or 1…5 V output signal pressure sensors.
These pressure sensors will measure from 0 to 100 millibars or 0 to 1.5 pounds per square inch pressure ranges, and convert the measured pressure to a corresponding output signal from 0 to 10 volts, 0 to 5 volts, or 1 to 5 volts.
10 kPa g range 0-5Vdc output submersible freshwater pressure sensor for water treatment use
100mbar dp range 0-5Vdc amplified output air pressure sensor for aerospace research test rig use
100 mbar gauge range 0-5 volts output stainless steel pressure sensor
10kPa differential range water pressure sensor & panel mount digital display
Compressor inlet air filter pressure difference sensor
Calibration Tables
0…100 mbar to 0…10 V
Use this table to determine the exact calibration points for a 0…100 millibars range to 0…10 volts output pressure sensor. For additional calibration points use our 0…100 mbar to 0…10 V converter and enter any value.
| % Scale | 0…100mbar | 0…10V |
|---|---|---|
| 0 | 0.00 | 0.00 |
| 10 | 10.00 | 1.00 |
| 20 | 20.00 | 2.00 |
| 30 | 30.00 | 3.00 |
| 40 | 40.00 | 4.00 |
| 50 | 50.00 | 5.00 |
| 60 | 60.00 | 6.00 |
| 70 | 70.00 | 7.00 |
| 80 | 80.00 | 8.00 |
| 90 | 90.00 | 9.00 |
| 100 | 100.00 | 10.00 |
Request product information for a 0...100 mbar to 0...10 V pressure sensor that matches the input and output measurement range from the calibration table above.
0…1.5 psi to 0…10 V
Use this table to determine the exact calibration points for a 0…1.5 pounds per square inch range to 0…10 volts output pressure sensor. For additional calibration points use our 0…1.5 psi to 0…10 V converter and enter any value.
| % Scale | 0…1.5psi | 0…10V |
|---|---|---|
| 0 | 0.00 | 0.00 |
| 10 | 0.15 | 1.00 |
| 20 | 0.30 | 2.00 |
| 30 | 0.45 | 3.00 |
| 40 | 0.60 | 4.00 |
| 50 | 0.75 | 5.00 |
| 60 | 0.90 | 6.00 |
| 70 | 1.05 | 7.00 |
| 80 | 1.20 | 8.00 |
| 90 | 1.35 | 9.00 |
| 100 | 1.50 | 10.00 |
Request product information for a 0...1.5 psi to 0...10 V pressure sensor that matches the input and output measurement range from the calibration table above.
0…100 mbar to 0…5 V
Use this table to determine the exact calibration points for a 0…100 millibars range to 0…5 volts output pressure sensor. For additional calibration points use our 0…100 mbar to 0…5 V converter and enter any value.
| % Scale | 0…100mbar | 0…5V |
|---|---|---|
| 0 | 0.00 | 0.00 |
| 10 | 10.00 | 0.50 |
| 20 | 20.00 | 1.00 |
| 30 | 30.00 | 1.50 |
| 40 | 40.00 | 2.00 |
| 50 | 50.00 | 2.50 |
| 60 | 60.00 | 3.00 |
| 70 | 70.00 | 3.50 |
| 80 | 80.00 | 4.00 |
| 90 | 90.00 | 4.50 |
| 100 | 100.00 | 5.00 |
Request product information for a 0...100 mbar to 0...5 V pressure sensor that matches the input and output measurement range from the calibration table above.
0…1.5 psi to 0…5 V
Use this table to determine the exact calibration points for a 0…1.5 pounds per square inch range to 0…5 volts output pressure sensor. For additional calibration points use our 0…1.5 psi to 0…5 V converter and enter any value.
| % Scale | 0…1.5psi | 0…5V |
|---|---|---|
| 0 | 0.00 | 0.00 |
| 10 | 0.15 | 0.50 |
| 20 | 0.30 | 1.00 |
| 30 | 0.45 | 1.50 |
| 40 | 0.60 | 2.00 |
| 50 | 0.75 | 2.50 |
| 60 | 0.90 | 3.00 |
| 70 | 1.05 | 3.50 |
| 80 | 1.20 | 4.00 |
| 90 | 1.35 | 4.50 |
| 100 | 1.50 | 5.00 |
Request product information for a 0...1.5 psi to 0...5 V pressure sensor that matches the input and output measurement range from the calibration table above.
0…100 mbar to 1…5 V
Use this table to determine the exact calibration points for a 0…100 millibars range to 1…5 volts output pressure sensor. For additional calibration points use our 0…100 mbar to 1…5 V converter and enter any value.
| % Scale | 0…100mbar | 1…5V |
|---|---|---|
| 0 | 0.00 | 1.00 |
| 10 | 10.00 | 1.40 |
| 20 | 20.00 | 1.80 |
| 30 | 30.00 | 2.20 |
| 40 | 40.00 | 2.60 |
| 50 | 50.00 | 3.00 |
| 60 | 60.00 | 3.40 |
| 70 | 70.00 | 3.80 |
| 80 | 80.00 | 4.20 |
| 90 | 90.00 | 4.60 |
| 100 | 100.00 | 5.00 |
Request product information for a 0...100 mbar to 1...5 V pressure sensor that matches the input and output measurement range from the calibration table above.
0…1.5 psi to 1…5 V
Use this table to determine the exact calibration points for a 0…1.5 pounds per square inch range to 1…5 volts output pressure sensor. For additional calibration points use our 0…1.5 psi to 1…5 V converter and enter any value.
| % Scale | 0…1.5psi | 1…5V |
|---|---|---|
| 0 | 0.00 | 1.00 |
| 10 | 0.15 | 1.40 |
| 20 | 0.30 | 1.80 |
| 30 | 0.45 | 2.20 |
| 40 | 0.60 | 2.60 |
| 50 | 0.75 | 3.00 |
| 60 | 0.90 | 3.40 |
| 70 | 1.05 | 3.80 |
| 80 | 1.20 | 4.20 |
| 90 | 1.35 | 4.60 |
| 100 | 1.50 | 5.00 |
Request product information for a 0...1.5 psi to 1...5 V pressure sensor that matches the input and output measurement range from the calibration table above.