I am looking for pressure transducers that have an adjustable zero and span so that they can be adjusted if they go slightly out of calibration, the current ones we have are non-adjustable. We would be looking for pressure transducers with an analogue output and generally use a variety from 0-70mbar to 0-20bar with accuracy ranging from 0.25% to 0.05%.
The TKDA comes in ranges from -1…+1 bar up to 0…500 bar gauge, and a 0.5% or 0.25% accuracy. A magnetic pen is pointed at a target on the sensor case to set the zero and full span output (for shunt calibration, a cal pin also needs to be short circuited as well).
The TPSADA comes in ranges from 0…4 bar up to 0…1000 bar gauge, and a 0.1% accuracy. A magnetic pen is pointed at a target on the sensor case to set the zero and full span output (for shunt calibration, a cal pin also needs to be short circuited as well).
The DMP 331i comes in ranges from 0…0.4 bar (40 mbar down range) up to 40 bar gauge or absolute, and a 0.1% accuracy. A serial communication converter cable is connected to the sensor and pc software is used to adjust zero & full range span (10:1 down range)
The DMP 333i comes in ranges from 0…60 bar (6 bar down range) up to 600 bar gauge or absolute, and a 0.1% accuracy. A serial communication converter cable is connected to the sensor and pc software is used to adjust zero & full range span (10:1 down range)
The 33 X series comes in ranges from 0-1 bar up to 1000 bar gauge or absolute, plus differential up to 30 bar, and a 0.1% or 0.05% accuracy depending on the compensated temperature range. A serial communication converter cable is connected to the sensor and pc software is used to adjust zero & full range span (10:1 down range).
The PD 33 X comes in ranges from 0…1 bar up to 0…30 bar differential, and a 0.1% or 0.05% accuracy depending on the compensated temperature range. A serial communication converter cable is connected to the sensor and pc software is used to adjust zero & full range span (10:1 down range).
The 41 X series comes in ranges from 0…30 mbar up to 0…300 mbar gauge or differential, and a 0.2% accuracy. A serial communication converter cable is connected to the sensor and pc software is used to adjust zero & full range span (10:1 down range).
