Click save settings to reload page with unique web page address for bookmarking and sharing the current tool settings
Flip tool with current settings and calculate depth to water level instead
0.5mH2Og range ratiometric 0.5-4.5V output submersible sump pump water level sensor
12 inch range 4-20mA output submersible freshwater tank level sensor
200m deep well pump water level sensor, switch & display- Rainwater harvesting depth sensor for 1.25 metre deep tank
Related Tools
- Depth converter
- Height converter
- Calculate depth to water from well depth and head of water
- Fluid depth, density, gravity and pressure calculator
User Guide
This tool will calculate the head of water in a well by subtracting the depth to water from the well depth you enter, and convert any combination of depth units for each depth and height value.
Water Well Depth
Enter the water well depth and select the associated depth units directly underneath. The water well depth is measured from the top of the well to the physical bottom of the well or sensor probe position, such as a hydrostatic pressure sensor measuring the water level height .
Water Level Depth
Enter the water level depth and select the associated height units directly underneath. The water level depth is measured from the top of the well down to the surface of the water.
Water Level Height
The water level height is calculated by subtracting the depth to water from the depth of well, and will appear once the required head of water units are selected directly underneath. The water level height is the distance from the surface of the water down to the bottom of the well or the sensor probe location, such as a hydrostatic pressure sensor which maybe installed at a higher position in the well.
Modbus RTU RS485 submersible borehole water level sensor- BMS water tank 6mH2Og range 0-10V out submersible level sensor
18.605 G Low Cost Submersible Diesel Fuel and Water Tank Level Sensor
Small diameter dip well water level transducer