0…700 mbar, 0…10 psi, 0…280 inH2O, or 0…70 kPa pressure range, 4…20 mA output signal pressure sensors.
These pressure sensors will measure from 0 to 700 millibars, 0 to 10 pounds per square inch, 0 to 280 inches of water column, or 0 to 70 kilopascals pressure ranges, and convert the measured pressure to a corresponding output signal from 4 to 20 milliamps.
10 psig 4-20mA out submersible freshwater pressure sensor for underwater structure research
10 psi g range flush diaphragm stainless steel 316L pressure transmitter
10psig 4-20mA oily wastewater pressure sensor with hi-temp protection for tank level gauging use
7mH2O g range 4-20mA out hydrostatic liquid level pressure sensor
-10 to +5 psi compound range fresh water pressure sensor
Calibration Tables
0…700 mbar to 4…20 mA
Use this table to determine the exact calibration points for a 0…700 millibars range to 4…20 milliamps output pressure sensor. For additional calibration points use our 0…700 mbar to 4…20 mA converter and enter any value.
% Scale | 0…700mbar | 4…20mA |
---|---|---|
0 | 0.00 | 4.00 |
10 | 70.00 | 5.60 |
20 | 140.00 | 7.20 |
30 | 210.00 | 8.80 |
40 | 280.00 | 10.40 |
50 | 350.00 | 12.00 |
60 | 420.00 | 13.60 |
70 | 490.00 | 15.20 |
80 | 560.00 | 16.80 |
90 | 630.00 | 18.40 |
100 | 700.00 | 20.00 |
Request product information for a 0...700 mbar to 4...20 mA pressure sensor that matches the input and output measurement range from the calibration table above.
0…10 psi to 4…20 mA
Use this table to determine the exact calibration points for a 0…10 pounds per square inch range to 4…20 milliamps output pressure sensor. For additional calibration points use our 0…10 psi to 4…20 mA converter and enter any value.
% Scale | 0…10psi | 4…20mA |
---|---|---|
0 | 0.00 | 4.00 |
10 | 1.00 | 5.60 |
20 | 2.00 | 7.20 |
30 | 3.00 | 8.80 |
40 | 4.00 | 10.40 |
50 | 5.00 | 12.00 |
60 | 6.00 | 13.60 |
70 | 7.00 | 15.20 |
80 | 8.00 | 16.80 |
90 | 9.00 | 18.40 |
100 | 10.00 | 20.00 |
Request product information for a 0...10 psi to 4...20 mA pressure sensor that matches the input and output measurement range from the calibration table above.
0…280 inH2O to 4…20 mA
Use this table to determine the exact calibration points for a 0…280 inches of water column range to 4…20 milliamps output pressure sensor. For additional calibration points use our 0…280 inH2O to 4…20 mA converter and enter any value.
% Scale | 0…280inH2O | 4…20mA |
---|---|---|
0 | 0.00 | 4.00 |
10 | 28.00 | 5.60 |
20 | 56.00 | 7.20 |
30 | 84.00 | 8.80 |
40 | 112.00 | 10.40 |
50 | 140.00 | 12.00 |
60 | 168.00 | 13.60 |
70 | 196.00 | 15.20 |
80 | 224.00 | 16.80 |
90 | 252.00 | 18.40 |
100 | 280.00 | 20.00 |
Request product information for a 0...280 inH2O to 4...20 mA pressure sensor that matches the input and output measurement range from the calibration table above.
0…70 kPa to 4…20 mA
Use this table to determine the exact calibration points for a 0…70 kilopascals range to 4…20 milliamps output pressure sensor. For additional calibration points use our 0…70 kPa to 4…20 mA converter and enter any value.
% Scale | 0…70kPa | 4…20mA |
---|---|---|
0 | 0.00 | 4.00 |
10 | 7.00 | 5.60 |
20 | 14.00 | 7.20 |
30 | 21.00 | 8.80 |
40 | 28.00 | 10.40 |
50 | 35.00 | 12.00 |
60 | 42.00 | 13.60 |
70 | 49.00 | 15.20 |
80 | 56.00 | 16.80 |
90 | 63.00 | 18.40 |
100 | 70.00 | 20.00 |
Request product information for a 0...70 kPa to 4...20 mA pressure sensor that matches the input and output measurement range from the calibration table above.