0…1 mbar, 0…0.4 inH2O, 0…100 Pa, or 0…0.25 oz/in2 pressure range, 4…20 mA output signal pressure sensors.
These pressure sensors will measure from 0 to 1 millibar, 0 to 0.4 inches of water column, 0 to 100 pascals, or 0 to 0.25 ounces per square inch pressure ranges, and convert the measured pressure to a corresponding output signal from 4 to 20 milliamps.
100 Pa bi-directional range differential air pressure transmitter
Wireless environmental sensors with custom MQTT SCADA system for energy management IoT platform
Wireless differential pressure monitoring for room overpressure using a modbus gateway
Bi-directional low pressure sensing for yacht engine room ventilation control- Balancing air pressure in marine engine rooms with a low range dp sensor
Low range ATEX approved 100 Pascal range DP transmitter
Bi-directional -20 to +100 Pa clean room air diff pressure transmitter- ATEX rated room ±100 Pa differential pressure transmitter
- 1 mbar range 4-20mA output biogas pressure transmitter for controlling blower fan connected to a covered lagoon
- Minus 100 pascal suction pressure transmitter
Calibration Tables
0…1 mbar to 4…20 mA
Use this table to determine the exact calibration points for a 0…1 millibar range to 4…20 milliamps output pressure sensor. For additional calibration points use our 0…1 mbar to 4…20 mA converter and enter any value.
| % Scale | 0…1mbar | 4…20mA |
|---|---|---|
| 0 | 0.00 | 4.00 |
| 10 | 0.10 | 5.60 |
| 20 | 0.20 | 7.20 |
| 30 | 0.30 | 8.80 |
| 40 | 0.40 | 10.40 |
| 50 | 0.50 | 12.00 |
| 60 | 0.60 | 13.60 |
| 70 | 0.70 | 15.20 |
| 80 | 0.80 | 16.80 |
| 90 | 0.90 | 18.40 |
| 100 | 1.00 | 20.00 |
Request product information for a 0...1 mbar to 4...20 mA pressure sensor that matches the input and output measurement range from the calibration table above.
0…0.4 inH2O to 4…20 mA
Use this table to determine the exact calibration points for a 0…0.4 inches of water column range to 4…20 milliamps output pressure sensor. For additional calibration points use our 0…0.4 inH2O to 4…20 mA converter and enter any value.
| % Scale | 0…0.4inH2O | 4…20mA |
|---|---|---|
| 0 | 0.00 | 4.00 |
| 10 | 0.04 | 5.60 |
| 20 | 0.08 | 7.20 |
| 30 | 0.12 | 8.80 |
| 40 | 0.16 | 10.40 |
| 50 | 0.20 | 12.00 |
| 60 | 0.24 | 13.60 |
| 70 | 0.28 | 15.20 |
| 80 | 0.32 | 16.80 |
| 90 | 0.36 | 18.40 |
| 100 | 0.40 | 20.00 |
Request product information for a 0...0.4 inH2O to 4...20 mA pressure sensor that matches the input and output measurement range from the calibration table above.
0…100 Pa to 4…20 mA
Use this table to determine the exact calibration points for a 0…100 pascals range to 4…20 milliamps output pressure sensor. For additional calibration points use our 0…100 Pa to 4…20 mA converter and enter any value.
| % Scale | 0…100Pa | 4…20mA |
|---|---|---|
| 0 | 0.00 | 4.00 |
| 10 | 10.00 | 5.60 |
| 20 | 20.00 | 7.20 |
| 30 | 30.00 | 8.80 |
| 40 | 40.00 | 10.40 |
| 50 | 50.00 | 12.00 |
| 60 | 60.00 | 13.60 |
| 70 | 70.00 | 15.20 |
| 80 | 80.00 | 16.80 |
| 90 | 90.00 | 18.40 |
| 100 | 100.00 | 20.00 |
Request product information for a 0...100 Pa to 4...20 mA pressure sensor that matches the input and output measurement range from the calibration table above.
0…0.25 oz/in2 to 4…20 mA
Use this table to determine the exact calibration points for a 0…0.25 ounces per square inch range to 4…20 milliamps output pressure sensor. For additional calibration points use our 0…0.25 oz/in2 to 4…20 mA converter and enter any value.
| % Scale | 0…0.25oz/in2 | 4…20mA |
|---|---|---|
| 0 | 0.000 | 4.00 |
| 10 | 0.025 | 5.60 |
| 20 | 0.050 | 7.20 |
| 30 | 0.075 | 8.80 |
| 40 | 0.100 | 10.40 |
| 50 | 0.125 | 12.00 |
| 60 | 0.150 | 13.60 |
| 70 | 0.175 | 15.20 |
| 80 | 0.200 | 16.80 |
| 90 | 0.225 | 18.40 |
| 100 | 0.250 | 20.00 |
Request product information for a 0...0.25 oz/in2 to 4...20 mA pressure sensor that matches the input and output measurement range from the calibration table above.