0…1 mbar or 0…0.4 inH2O pressure range, 0…10 V, 0…5 V, or 1…5 V output signal pressure sensors.
These pressure sensors will measure from 0 to 1 millibar or 0 to 0.4 inches of water column pressure ranges, and convert the measured pressure to a corresponding output signal from 0 to 10 volts, 0 to 5 volts, or 1 to 5 volts.
1 hPa Positive Room Pressure Sensor, Switch & Display
10 mmWC draft fan differential pressure transmitter
Balancing air pressure in marine engine rooms with a low range dp sensor
Heating appliance chimney draft and barometric pressure testing using differential and absolute sensors- 0-100Pa air pressure transducer with a 0-10V analog output
Calibration Tables
0…1 mbar to 0…10 V
Use this table to determine the exact calibration points for a 0…1 millibar range to 0…10 volts output pressure sensor. For additional calibration points use our 0…1 mbar to 0…10 V converter and enter any value.
| % Scale | 0…1mbar | 0…10V |
|---|---|---|
| 0 | 0.00 | 0.00 |
| 10 | 0.10 | 1.00 |
| 20 | 0.20 | 2.00 |
| 30 | 0.30 | 3.00 |
| 40 | 0.40 | 4.00 |
| 50 | 0.50 | 5.00 |
| 60 | 0.60 | 6.00 |
| 70 | 0.70 | 7.00 |
| 80 | 0.80 | 8.00 |
| 90 | 0.90 | 9.00 |
| 100 | 1.00 | 10.00 |
Request product information for a 0...1 mbar to 0...10 V pressure sensor that matches the input and output measurement range from the calibration table above.
0…0.4 inH2O to 0…10 V
Use this table to determine the exact calibration points for a 0…0.4 inches of water column range to 0…10 volts output pressure sensor. For additional calibration points use our 0…0.4 inH2O to 0…10 V converter and enter any value.
| % Scale | 0…0.4inH2O | 0…10V |
|---|---|---|
| 0 | 0.00 | 0.00 |
| 10 | 0.04 | 1.00 |
| 20 | 0.08 | 2.00 |
| 30 | 0.12 | 3.00 |
| 40 | 0.16 | 4.00 |
| 50 | 0.20 | 5.00 |
| 60 | 0.24 | 6.00 |
| 70 | 0.28 | 7.00 |
| 80 | 0.32 | 8.00 |
| 90 | 0.36 | 9.00 |
| 100 | 0.40 | 10.00 |
Request product information for a 0...0.4 inH2O to 0...10 V pressure sensor that matches the input and output measurement range from the calibration table above.
0…1 mbar to 0…5 V
Use this table to determine the exact calibration points for a 0…1 millibar range to 0…5 volts output pressure sensor. For additional calibration points use our 0…1 mbar to 0…5 V converter and enter any value.
| % Scale | 0…1mbar | 0…5V |
|---|---|---|
| 0 | 0.00 | 0.00 |
| 10 | 0.10 | 0.50 |
| 20 | 0.20 | 1.00 |
| 30 | 0.30 | 1.50 |
| 40 | 0.40 | 2.00 |
| 50 | 0.50 | 2.50 |
| 60 | 0.60 | 3.00 |
| 70 | 0.70 | 3.50 |
| 80 | 0.80 | 4.00 |
| 90 | 0.90 | 4.50 |
| 100 | 1.00 | 5.00 |
Request product information for a 0...1 mbar to 0...5 V pressure sensor that matches the input and output measurement range from the calibration table above.
0…0.4 inH2O to 0…5 V
Use this table to determine the exact calibration points for a 0…0.4 inches of water column range to 0…5 volts output pressure sensor. For additional calibration points use our 0…0.4 inH2O to 0…5 V converter and enter any value.
| % Scale | 0…0.4inH2O | 0…5V |
|---|---|---|
| 0 | 0.00 | 0.00 |
| 10 | 0.04 | 0.50 |
| 20 | 0.08 | 1.00 |
| 30 | 0.12 | 1.50 |
| 40 | 0.16 | 2.00 |
| 50 | 0.20 | 2.50 |
| 60 | 0.24 | 3.00 |
| 70 | 0.28 | 3.50 |
| 80 | 0.32 | 4.00 |
| 90 | 0.36 | 4.50 |
| 100 | 0.40 | 5.00 |
Request product information for a 0...0.4 inH2O to 0...5 V pressure sensor that matches the input and output measurement range from the calibration table above.
0…1 mbar to 1…5 V
Use this table to determine the exact calibration points for a 0…1 millibar range to 1…5 volts output pressure sensor. For additional calibration points use our 0…1 mbar to 1…5 V converter and enter any value.
| % Scale | 0…1mbar | 1…5V |
|---|---|---|
| 0 | 0.00 | 1.00 |
| 10 | 0.10 | 1.40 |
| 20 | 0.20 | 1.80 |
| 30 | 0.30 | 2.20 |
| 40 | 0.40 | 2.60 |
| 50 | 0.50 | 3.00 |
| 60 | 0.60 | 3.40 |
| 70 | 0.70 | 3.80 |
| 80 | 0.80 | 4.20 |
| 90 | 0.90 | 4.60 |
| 100 | 1.00 | 5.00 |
Request product information for a 0...1 mbar to 1...5 V pressure sensor that matches the input and output measurement range from the calibration table above.
0…0.4 inH2O to 1…5 V
Use this table to determine the exact calibration points for a 0…0.4 inches of water column range to 1…5 volts output pressure sensor. For additional calibration points use our 0…0.4 inH2O to 1…5 V converter and enter any value.
| % Scale | 0…0.4inH2O | 1…5V |
|---|---|---|
| 0 | 0.00 | 1.00 |
| 10 | 0.04 | 1.40 |
| 20 | 0.08 | 1.80 |
| 30 | 0.12 | 2.20 |
| 40 | 0.16 | 2.60 |
| 50 | 0.20 | 3.00 |
| 60 | 0.24 | 3.40 |
| 70 | 0.28 | 3.80 |
| 80 | 0.32 | 4.20 |
| 90 | 0.36 | 4.60 |
| 100 | 0.40 | 5.00 |
Request product information for a 0...0.4 inH2O to 1...5 V pressure sensor that matches the input and output measurement range from the calibration table above.