We have a bath that is 300 mm deep filled with de-ionised water in an ATEX zone 2 which we would like to be able to sense the level of, ideally we need the sensor to have a 5 metre lead, and it would need withstand the bath temperature which could go up to 100 degrees Celsius.
We would suggest the LMK 382 submersible level sensor which has the option to withstand high temperature liquids up to 125°C if the TPE coated cable is specified, a intrinsically safe 4-20mA output with use with a zone barrier in an ATEX zone 2 area, and a low enough range to measure over 0 to 300 millimetres.
LMK 382 High Temperature ATEX Level Sensor
- SKU ID: s1-lmk382-46-23738
- Pressure Range: 0 to 300
- Units: mmH2O
- Reference Type: Gauge / Vented (atm to +P)
- Output Signal: 4-20mA, 2 wire
- Accuracy: 0.35% FS
- Installation Type: Probe version with flush diaphragm and detachable
- nose cone
- Housing Material: Stainless Steel 316L
- Diaphragm Material: Ceramic Al2O3 96%
- Media Exposed Seals: FKM
- Cable Type: TPE (125degC max)
- Cable Length: 5
- Cable Length Units: Metres (m)
- Optional Extras: ATEX Intrinsic safety approval