Hydrostatic principle level sensor and indicator for overcoming frothing problem on the surface of a rolling oil liquid inside a storage tank.
These devices provide a local visual indication and an analogue signal for sending to a plc i/p.
The level sensor probe is suitable for use in dirty abrasive oil conditions.
LMK382 Hydrostatic Oil Level Transmitter
- Part No: 566-6000-1-C-E-1-3-3-010-000
- Pressure Range: 0 – 6 mWG
- Output: 4 – 20mA / 2-wire
- Supply Voltage: 12 – 28V dc
- Electrical Connection: 10 mtr of FEP cable
- Housing Material: Stainless Steel 1.4571 (316Ti)
- Seal Material: FKM
- Diaphragm Material: Aluminium Oxide 99.9%
- Accuracy: 0.35% FS
- IP Rating: 68
- Thermal Zero Shift (TZS): < ±0.01% / FSO / °C
- Media Temperature: -10 to +60°C
- Operating Temperature: -10 to +60°C
- Special Options: None
- Approvals: ATEX (II 1 G Eex ia IIB T4)
SRP-94 Digital Process Indicator
- Part No: SRP-94-1833-1-4-011
- Input Type: 0/4-20mA, 0/1-5V, 0/2-10V
- Number of Outputs: 3
- Type of Outputs: 2 x Relay + Re-Transmission
- Power Supply: 85V…260V AC/DC
- Options: No Options
- Display: Red LED 4 x 20mm High, -999 to +9999 + decimal point
- Transducer Power Supply: 24 V DC +5%, -10% / 100 mA
- Communications interface: RS 485, 8N1 and 8N2, 1200 bit/s – 115200 bit/s, Modbus RTU
- Operating Temperature: 0 – 50°C
- Case Style: Panel Mount
- Case Dimension: 96 x 48 x 100mm
- Panel cut-out dimensions: 90.5 x 43mm
- Installation Depth: 102mm min.
- Protection Class: IP65