• Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar
SensorsONE

SensorsONE

Measurement Instrumentation Products

  • Products
  • Tools
  • Contact

Water well 30mH2Og range 4-20mA out freshwater level sensor with RTD

Request Price

Low cost stainless steel 316L submersible freshwater level sensor and RTD temperature sensor for measuring water well level over a 0 to 30 mH2O gauge hydrostatic pressure range and sending out a 4 to 20 milliamps signal.

This configuration of the IMSL is wired to freshwater level monitoring & control instrumentation using a 30 metres length of PUR coated cable which is joined to the probes stainless steel 316L body via a waterproof seal assembly, which is IP68 rated for continuous submersion down to a maximum water depth of 100 metres.

This stainless steel 316L housing version of the IMSL submersible liquid level sensor has a silicon based diaphragm sensing module with semiconductor strain gauges mounted inside a dielectric oil filled stainless steel capsule fitted with a thin isolation diaphragm. This configuration also includes an optional PT1000 RTD sensor for measuring the well temperature.

Silicon based semiconductor strain gauge pressure sensors produce very high gain and precision output signals with low hysteresis and good long term calibration stability.

The silicon sensor capsule & electronics are enclosed within a stainless steel 316L cylindrical housing and the IP68 water tight seal is provided by a series of Viton elastomer O rings.

The measurement accuracy is +/-0.1% FS best straight line at ambient temperature, with an additional thermal zero shift error of 0.02% FS/°C and thermal span shift error of 0.01% FS/°C.

IMSL Freshwater Well Level Sensor

  • SKU ID: s1-imsl-30-16714
  • Pressure Range: 0 to 30
  • Units: mH2O
  • Pressure Reference: Gauge, Vented (G)
  • Output Signal: 4 – 20mA, 2-wire (5)
  • Non-Linearity and Hysteresis: 0.1% FS (standard) (A)
  • Thermal Zero Shift: 0.02% FS per °C (2)
  • Thermal Span Shift: 0.01% FS per °C
  • Housing Material: Stainless Steel 316L
  • Diaphragm Material: Stainless Steel 316L
  • Media Exposed Seals: Viton (standard)(V)
  • Cable Type: PUR (A)
  • Cable Length: 30
  • Cable Length Units: Metres (m)
  • Process Connection: G1/4 male DIN3852 with removable nose cone
  • Special Requirements: Internal PT1000 3-wire temperature sensor (073)

Request Product Price

"*" indicates required fields

Please complete form below to request a quote for Water well 30mH2Og range 4-20mA out freshwater level sensor with RTD.

Please enter info about your application and include any other requirements.

⚠ Attention Required

Please remove all web links from Application Details text entry box above, to enable form submission.

You will be able to provide any links related to your enquiry later on, by replying to the email confirmation once your submission has been processed.

Thank you.



Primary Sidebar

Liquid Level Sensor Specifier

Specify a liquid level sensor

Select your liquid level sensor requirements

Wirelessly Measure & Log Temperature

Use this battery powered wireless temperature probe to transmit readings to a receiver connected to USB, RS485, RS232, cellular network or analog output

Use this battery powered wireless temperature probe to transmit readings to a receiver connected to USB, RS485, RS232, cellular network or analog output

Wirelessly Measure & Log 4-20mA

Use this battery powered wireless 4-20mA wireless transmitter to transmit readings to a receiver connected to USB, RS485, RS232, cellular network or analog output

Use this battery powered 4-20mA wireless transmitter to transmit readings to a receiver connected to USB, RS485, RS232, cellular network or analog output

Product Enquiry

Send us your enquiry for Water well 30mH2Og range 4-20mA out freshwater level sensor with RTD to get assistance with this product type.

Email Your Enquiry

enquiries@sensorsone.com

© 2023 SensorsONE Ltd, all rights reserved

  • Home
  • Products
  • Tools
  • Legal
  • Contact