A submersible water temperature and level measurement transmitter for submerging in a borehole and measuring temperature over -5 to +50C, and depth down to 10m, from the nose cone, and sending each measurement with a separate 4-20mA signal through the submersible cable electrical connection.
This LMP 307T submersible borehole water temperature and level transmitter which has a nose cone to protect the sensor diaphragm is used to measure the water temperature from -5 to +55 degrees Celsius, and height from 0 to 10 metres, to monitor groundwater borehole temperature and depth.
The transmitter is installed by lowering it into the borehole until the nose cone reaches the required measurement point. The measured temperature and level is sent using isolated 4 to 20 milliamp current loop output signals through the submersible IP68 sealed cable to connected borehole water monitoring instrumentation.
LMP 307T Submersible Level & Temperature Transmitter
- SKU ID: s1-lmp307t-92-24718
- Level Range: 0 – 10mWG
- Output Signal: 4 – 20mA / 2-wire
- Accuracy: <±0.125% / FS (BFSL)
- Temperature Range: -5 to +50°C
- Output Signal: 4 – 20mA / 2-wire
- Accuracy: <±1 °C
- Electrical Connection: Vented PUR Cable
- Housing Material: 316L Stainless Steel
- Seal Material: FKM
- Cable Length (enter in mtrs): 10 metre PUR
- Process Connection: Self flushing nose cone
- Diaphragm Material: 316L Stainless Steel
- Supply Voltage: 9 – 32V dc