We are testing rupture disc assemblies for use in a product and we need to be able to verify the rupture pressure of the discs. We will need a gauge to be used as a tester to verify the max pressure reached. The gases used could be air, nitrogen or carbon dioxide. A 10 bar gauge range would be ideal and we do not need a high level of precision for the rupture tests.
We would suggest the DM 10 pressure gauge which is an affordable entry level digital pressure test gauge with a built-in max reading recorder, and a 0.5% full scale accuracy. This test gauge will maintain a record of the highest pressure reached, which can be continuously read from the LCD display. The stored maximum reading can be easily reset via press buttons below the pressure reading display, following each rupture test.
DM10 Rupture Pressure Test Gauge
- SKU ID: s1-dm10-67-27110
- Part No: M04-1002-0-B8-0K0-N40-1-2-2-1-000
- Pressure Range: 10
- Units: bar
- Reference Type: Gauge (atm to +P)
- Accuracy: 0.5% FS BSL
- Process Connection: 1/4 NPT male