The ECO1 / ECO2 digital manometer is an economically priced digital pressure gauge available in either a -1 to 30 bar or a 300 bar pressure range which are accurate to 1% of range with optional intrinsic safety certification.
Contents
Product Parameters
- Pressure Ranges: -1 to 30 bar sg/31 bar absolute or 300 bar sealed gauge/absolute
- Accuracy: ±1% full scale max
- Power Supply: 3 volt CR2430 battery
- Display: 4 digit LCD
- Environmental Protection: IP65
- Dimensions: 59 x 95 x 32 mm
- Weight: 125 g
- Pressure Connection: 1/4 inch BSP or NPT male with swivel joint
- Special Options: ATEX certification to II 1 G EEx ia IIC T6 or T5, traceable or UKAS cal certs
Product Description
The ECO 1 / ECO 2 digital pressure gauge is compact and low cost for many general purpose pressure checking applications which require industrial grade performance on a small budget.
The pressure is displayed bar pressure units from a 4 digit LCD display and the zero tare, peak and valley hold and auto off setting are all accessed via the 2 push buttons located just below the LCD display.
The ECO1 / ECO 2 digital pressure gauge is powered by a small 3 volt CR2430 battery which lasts up to 1000 hours in continuous use. A 1/4 inch BSP or NPT male swivel joint pressure adaptor is supplied to allow the digital pressure gauge to be orientated for optimum viewing of the display.
Product Help
7/16 UNF fitting availability
I’m actually after a gauge with a 7/16 UNF male fitting to connect it into my scuba filling whip for gas blending, is it available with this connection or there an adaptor available?
It is supplied as standard, and is the fixed thread which the G1/4 male swivel adapter is connected to. So you simply remove the swivel adapter to use the 7/16 UNF fitting.
Calibration certificate included
Could you advise if the ECO1 low cost digital pressure gauge comes with a calibration certificate?
The ECO1 does not include a cal cert as standard, although it is calibrated during manufacture, but no calibration certificates are produced to accompany the product.
There are 3 different types of cal cert that can chosen for the ECO1:
- 5 points, traceable to international standards
- 11 points, traceable to international standards
- UKAS
Related Documents
Specification data sheets
Request Product Price
Please select the options you require for the ECO1 / ECO 1 Ei / ECO 2 Low Cost Digital Manometer in your application and request a quote.