A marine approved gauge pressure sensor for hydraulic control use to measure pressure of mineral hydraulic oil over a range of 0 to 400 bar g from the G1/4 male process connection, and sending the corresponding 4-20mA signal through the DIN plug electrical connection.
This DMP 457 marine approved hydraulic gauge range pressure sensor can be used in hydraulic control systems to measure mineral hydraulic oil pressure from 0 to 400 bar gauge.
The sensor is installed using a G1/4 male thread to measure the mineral hydraulic oil, and the 4 to 20 milliamp current output is connected to signal monitoring instrumentation using the DIN plug pin connector.
Also marine certified for use on ships is built into this gauge pressure sensor to meet the requirements of measuring mineral hydraulic oil pressure in hydraulic control applications onboard a marine vessel.
DMP 457 Marine Approved Hydraulic Pressure Sensor
- SKU ID: s1-dmp457-61-16798
- Pressure Range: 400
- Units: bar
- Range Type: Positive Gauge (atm to +P)
- Output Signal: 4-20mA (2 wire)
- Accuracy: 0.35% FS
- Electrical Connection: DIN-43650 plug IP65 (for 4-6mm cable)
- Process Connection: G1/4 DIN3852
- Media Exposed Seals: FKM