We are looking for a HART compatible ATEX dust approved pressure transmitter for measuring the outlet pressure on blowers used for silo fluidisation when discharging bulk powder.
XMPi
500 psi absolute range HART enabled 4-20mA output diesel pressure sensor for pipeline leak testing use
A HART coms enabled absolute pressure sensor for pipeline leak testing use to measure pressure of diesel over a range of 0 to 500 psi abs from the 1/2 NPT male process connection, and sending the corresponding 4-20mA signal through the mil-spec connector electrical connection.
30 to 300 psig natural gas HART 4-20mA pressure sensor for oil and gas use
A HART coms gauge pressure sensor for oil & gas industry use to measure pressure of natural gas over a range of 30 to 300 psi g from the 1/2 NPT male process connection, and sending the corresponding 4-20mA signal through the field housing screw terminals electrical connection.
7mH2O hydrostatic level sensor with 4-20mA plus HART
HART communications enabled 4-20mA output hydrostatic level sensor with a range of 0 to 7 metres of water column.
Compound vacuum and pressure HART transmitter for +/- 500 mmWG
Compound vacuum and pressure transmitter with HART compliant 4-20mA analog output and insertion type, bottom mounted, 1/2 NPT male process connection
HART flameproof (Ex d) re-scalable level transmitter for hydrostatic head up to 2 metres
HART compatible, ATEX flameproof approved, rangeable level transmitter to measure hydrostatic head of water/glycol or mineral oil fluid within a reservoir about 2 metres in height.
HART coms compatible vacuum transmitter for -1 to 0 bar g
HART enabled 4-20mA vacuum transmitter to monitor over the range of -1 to 0 bar with a 1/2″ BSP thread process connector.
-760mmHg to +20 kg/cm² pressure transmitter with HART coms
Compound range transmitter for sensing pressure from -760 mm of mercury vacuum to 20 kilograms per sq cm positive pressure with HART communication.
100 kg per square cm range HART pressure transmitter
Transmitter for measuring pressure with a range scaled from 0 to 100 kg/cm² range, configurable and adjustable via HART communication.
Zero and span adjustable 10 bar ATEX pressure transmitter
ATEX approved intrinsically safe pressure transmitter with zero & span adjustability over a maximum of 10 bar gauge
100 mbar abs vacuum transmitter with a 5 bar overpressure
4-20 mA signal vacuum transmitter with a 0 to 100 mbara range which can withstand a 5 bar absolute overpressure.
XMPi Process Plant Gauge and Absolute Pressure Transmitter
Process transmitter for measuring vacuum, steam, food, pharmaceutical, oil, gas and other pressure readings necessary for the monitoring and control of bulk production processes.