Transmit four separate 4-20mA signals and repeat them from the receiver using four of the five available analogue outputs.
Wireless
IW Series Industrial Wireless Measurement System
A complete wireless sensor and receiver system for use in industrial applications.
IWCTT Current Transformer mV ac Signal Input to Wireless Transmitter
Measure the millivolt alternating current output from any split core current transformer and wirelessly transmit it to a wireless receiver hub
IWDigT Switch or Pulse Input to Wireless Transmitter
Measure the open and closing of any voltage free contact switch or a pulses from a counter input, and wirelessly transmit it to a wireless receiver hub
IWVT 0-10Vdc Signal Input to Wireless Transmitter
Measure the signal from any 0 to 10 volt output measurement device, and wirelessly transmit it to a wireless receiver hub
IWmAT 4-20mA Signal Input to Wireless Transmitter
Measure the current loop signal output from any 4 to 20 milliamp transmitter, and wirelessly transmit it to a wireless receiver hub
IWTxT Loop Powered 4-20mA Input to Wireless Transmitter
Power and measure the current loop signal output from any 4 to 20 milliamp transmitter, and wirelessly transmit it to a wireless receiver hub
IWTRhT Wireless Ambient Temperature and Relative Humidity Sensor
Measure ambient temperature (Tamb) from -40 to +80 degrees Celsius and relative humidity (RH) from 0 to 100%, and wirelessly transmit them both to a wireless receiver hub
IWTaT Wireless Ambient Temperature Sensor
Measure ambient temperature from -40 to +80 degrees Celsius and transmit it wireless to a central wireless receiver
IWTT Wireless Battery Powered Temperature Sensor
Temperature sensing probe for wirelessly transmitting temperature readings from 3 wire PT100 platinum resistance thermometer, J or K type thermocouples.
IWR-5 Five Channel Wireless Sensor to 4-20mA or 1-5Vdc Output Signal Receiver
The IWR-5 is a five channel receiver designed to pair with IW series of wireless sensors and provide a 4-20mA or 1-5Vdc output signal
IWR-1 Single Channel Wireless Sensor to 4-20mA or 1-5Vdc Output Signal Receiver
The IWR-1 is a single channel receiver designed to pair with IW series of wireless sensors and provide a 4-20mA or 1-5Vdc output signal
IWR-PORT Wireless Sensors to Ethernet, RS232 or RS485 Gateway Receiver
The IWR-PORT Ethernet Gateway provides a link between wireless sensors and sensor networks and Industrial Ethernet or RS-232/485 networks.
IoT Gateway Wireless Sensors to 2G 3G 4G Modem Receiver
The IoT Gateway allows virtually any sensor to be monitored from anywhere with a Cellular connection.
IWR-USB Wireless Sensors to USB Gateway Receiver
The IWR-USB Gateway provides a link between wireless sensors and any PC with a USB connection
ECHO Mobile Network Battery Powered Multiple Sensor Telemetry Interface Unit
Mobile network communications and multichannel sensor signal input conditioner for installing in remote above or underground locations without a nearby power source or signal cables.
5 barg range wireless pressure sensing kit for district heating monitoring use
Wireless pressure measurement kit for district heating monitoring use with a 5barg range plus a 1/4 BSP male fitting. Each pressure reading is transmitted wirelessly to a five channel base receiver, where it is converted to a 1-5Vdc or 4-20mA analogue output signal.
75psig range wireless pressure sensing kit for pneumatic monitoring and testing use
Wireless pressure measurement kit for pneumatic monitoring and testing use with a 75psig range plus a 1/4 NPT male fitting. Each pressure reading is transmitted wirelessly to a single channel base receiver, where it is converted to a 1-5Vdc or 4-20mA analogue output signal.
750psig range wireless pressure sensing kit for leak testing use
Wireless pressure measurement kit for leak testing use with a 750psig range plus a 1/4 NPT male fitting. Each pressure reading is transmitted wirelessly to a single channel base receiver, where it is converted to a 1-5Vdc or 4-20mA analogue output signal.
400barg range wireless pressure sensing kit for use on rotating hydraulic clamping tools
Wireless pressure measurement kit for use on rotating hydraulic clamping tool with a 400barg range plus a 1/4 BSP male fitting. Each pressure reading is transmitted wirelessly to a single channel base receiver, where it is converted to a 1-5Vdc or 4-20mA analogue output signal.
30psig range wireless pressure sensing kit for production monitoring use
Wireless pressure measurement kit for production monitoring use with a 30psig range plus a 1/4 NPT male fitting. Each pressure reading is transmitted wirelessly to a five channel base receiver, where it is converted to a 1-5Vdc or 4-20mA analogue output signal.
150psig range wireless pressure sensing kit for leak testing use
Wireless pressure measurement kit for plumbing system leak testing use with a 150psig range plus a 1/4 NPT male fitting. Each pressure reading is transmitted wirelessly to a single channel base receiver, where it is converted to a 1-5Vdc or 4-20mA analogue output signal.
10 bar g range wireless pressure sensing kit for BMS monitoring use
Wireless pressure measurement kit for building management system controls use with a 10barg range plus a 1/4 BSP male fitting. Each pressure reading is transmitted wirelessly to a five channel base receiver, where it is converted to a 1-5Vdc or 4-20mA analogue output signal.
2barg, 10barg range wireless pressure sensing kit for production monitoring use
Wireless pressure measurement kit for production monitoring use with a -1barg, 2barg, 10barg range plus a 1/4 BSP male fitting. Each pressure reading is transmitted wirelessly to a five channel base receiver, where it is converted to a 1-5Vdc or 4-20mA analogue output signal.
What are the advantages of using Wired Sensors instead of Wireless Sensors
This article explores the many advantages of wired sensors compared to wireless sensors in order to help you make a decision on whether to opt for a wireless sensor network over a wired sensor installation.
IWPT Wireless Battery Powered Pressure Sensor and Receiver
Wireless battery powered pressure sensor and receiver system for connecting pressure sensors without wires to a central wireless receiver which converts each received pressure signal channel to a 1-5Vdc, 4-20mA output, USB, Ethernet TCP, RS232 RTU, RS485 RTU or 2G 3G 4G mobile cellular network.
RAMPORT Remote Asset Monitoring Modem with I/O Expansion Port
The RAMPORT is a small and cost effective method of monitoring remote plant and equipment from any PC or internet enable terminal loaded with a standard web browser.
Z-HEAD Wireless Universal Sensor System
A wireless interface system for connecting battery powered sensors to a computer via a central receiver.
Remote water tank level monitoring via GSM mobile network
Stand alone remote tank monitoring system for 10 water tanks where an alarm can be transmitted once certain levels are reached