Scroll down to a pressure from 1 to 1,000 Torr to see the matching reading in psi units.
Select a pressure in 0.01psi increment from 0.01 to 20.00 pounds force per square inch to see the matching pressure measured in torr units.
Pinpoint the pressure in torr pressure units from 1 to 1,000 to determine the value in bar units.
Pinpoint the pressure in bar pressure units from 0.001 to 2 to determine the value in Torr pressure units.
Look up a vacuum conversion value for percentage of vacuum (% vac), millibar (mbar, mb), hectopascal (hPa), pounds per square inch (psi), inches of mercury (inHg), millimetres of mercury (mmHg) or Torr absolute vacuum units.
Differential pressure sensor to measure the differential pressure between the inlet and outlet of a vacuum pump.
Look up a barometric conversion value for millibar (mbar, mb), hectopascal (hPa), pounds per square inch (psi), inches of mercury (inHg), millimetres of mercury (mmHg) or Torr pressure units.
Millitorr is a very small pressure unit used for high vacuum measurements and is a 1/1000x multiple of the torr pressure unit.
Torr is a pressure unit which is defined as 1 standard atmosphere divided by 760 (1 atm/760 or 101325 Pa/760).
Pick out a value form 1 to 1000 pascals to read off the value in Torr.
Change any value from 1 to 1000 kilopascals into Torr using the conversion table below.
Scroll down to the mbar value you wish to convert from 1 to 2000 to read off the converted value in torr pressure units.
Look up low vacuum range pressures from 1 to 1000 Torr to read the corresponding value in mbar.