A submersible saltwater level sensor for submerging in a seawater intake channel and measuring the depth over a range of 0 to 5m from the nose cone, and sending the corresponding 4-20mA signal through the submersible cable electrical connection.
SWL
Harbour seawater level sensor with digital display & relay outputs
sensor which can installed down a tube to measure seawater level in a harbour in order to switch a pump on when the tide comes in
100 kPa sea water compatible pressure sender and display
The SWL is a a IP68 pressure sensor which is made from Marine bronze for compatibility with sea-water.
Tidal flap sea water depth measurement up to 10m with 4-20mA signal
We need a pressure transmitter with a 1bar, 10mts pressure range and a 4-20mA signal.
Seawater Level Logger and Readout Portable Instrumentation Kit
Portable seawater level logger instrumentation kit for measuring, displaying and logging sea water levels to a maximum depth of 10 metres.
10 meter range submersible salt water level probe with current output
Probe for monitoring the level of salty water to a maximum of 10 meters of water column.
10 metre sea water depth sensor with millivolt output
Sea water compatible submersible pressure sensor for measuring down to 10 metre depth.
60 metre/200 foot sea water depth sensor with a 0 to 5Vdc output
Seawater compatible submersible pressure sensor with a 0 to 5 volts output signal for measuring sea water depth down to 60 metres (200 feet).
Sea water corrosive resistant underwater level transmitter
We need a hydrostatic level transmitter for immersion under sea water.
SWL Marine Bronze Submersible Level Sensor
Analogue output sensor for immersing in seawater to determine depth or change in water level by measuring hydrostatic pressure.