Submersible diesel level pressure sensor for installing in the bottom of tanks up to 2 metres deep.
Submersible
Submersible instrumentation product information and help guides for measurement products which have high integrity seals for fully submerging in liquids.
6 metre deep river level transducer with millivolt output
Low voltage output submersible pressure transducer for connecting to a data logger to measure water levels up to 6 metres deep in a river.
10 metre submersible water depth and temperature transducer with USB digital connection
USB interface IP68 pressure sensor to accurately indicate the depth and temperature of fresh water up to 10 metres water depth.
3 metre deep river water level transducer with low voltage output
Water level sensor for monitoring river level up to 3 metres (10 feet) with a low voltage signal for remote site data acquisition.
50 metre borehole water depth transmitter for dry running protection
Immersed liquid level sensor for use with borehole pumps to protect from dry running.
20 foot deep submersible salt water level transmitter for marine use
Submersible pressure transmitter for salt water tank applications to measure water levels up to 20 feet.
1 metre depth range Titanium housing submersible transducer
Titanium hydrostatic depth transducer for measuring up to 1 metre depth of sea water.
2.5 metre water level transmitter for submersing inside underground tank
Tank depth sensor for an underground cylindrical rain water collection tank which is 2.5 metres tall.
6m deep ballast tank level transmitter with marine certificate
Ship approved ballast tank level transmitter for measuring sea water to depth of 6 metres.
10 meter range submersible salt water level probe with current output
Probe for monitoring the level of salty water to a maximum of 10 meters of water column.
Diesel tank level transducer for mobile phone cellular transmitter/receiver mast sites
OEM fuel level sensor for diesel generators installed at telecom mobile cell tower sites.
3 metre / 10 foot fresh water level transmitter for OEM system integration
Cost effective submersible transducer with a 4-20mA transmitter to output into a PLC analog module on a fresh water system for tank level control up to 3 metres (10 foot).
70m/230ft depth SDI-12 submersible freshwater level probe
This probe has a SDI-12 digital interface which is standardised protocol for environmental monitoring instrumentation.
1.6 mH2O submersible transmitter for wash water break tanks
Submersible level transducer with a 4 to 20 milliamp output for measuring wash water level in a break tank up 1.6 metres deep.
Plastic seawater depth probe with 20ft range & 4-20mA out
Submersible pressure transmitter for the measuring of seawater at various depths from zero to twenty foot.
1 psi g submersible 0 to 5 volt output pressure transducer for fresh water
Fresh water voltage output pressure transducer with submersible cable for measuring water depth to over a range of 1 psi gauge.
10 metre / 32.8 feet deep fresh water level and temperature digital sensor
Hydrostatic level & temperature measurement submersible probe for measuring freshwater up to 10m (32.8ft) & temperatures -20 to +60 degC via USB.
10 metre sea water depth sensor with millivolt output
Sea water compatible submersible pressure sensor for measuring down to 10 metre depth.
Hi-temp level & temperature sensor for 50% NaOH solution
Submersible sensor for measuring both level and temperature of 50% Sodium Hydroxide (NaOH) solution.
20 foot deep detention water tank level sensor with 4 to 20 mA output
Low range waste water level transmitter to monitor level in detention tank.
4 metre range submersible freshwater level transmitter
Submersible pressure sensor for measuring up to 4 metres of fresh water depth with a 2 wire 4 to 20 milliamp current loop output.
6 metre range submersible freshwater level transmitter
Submersible pressure sensor for measuring up to 6 metres of fresh water depth with a 2 wire 4 to 20 milliamp current loop output.
3 metre range submersible freshwater level transmitter
Submersible pressure sensor for measuring up to 3 metres of fresh water depth with a 2 wire 4 to 20 milliamp current loop output.
60 metre/200 foot sea water depth sensor with a 0 to 5Vdc output
Seawater compatible submersible pressure sensor with a 0 to 5 volts output signal for measuring sea water depth down to 60 metres (200 feet).
100 metre range, 1 inch diameter fresh water borehole level transducer with hazardous area 4 to 20mA output
One inch diameter bore hole water level measurement transducer for measuring water depth up to 100 metres.
Low power consumption SDI-12 lake water level sensor
Lake water level sensor for immersed installations to measure the quantity of water in a lake with a low power consumption SDI-12 interface.
100 meter IP68 sea water level transmitter with Marine & ATEX approval
Submersible sea water level transmitter with GL and DNV marine approval and a measuring range of 0 to 100 meters of water.
Submersible diesel fuel tank level sensor with 5V out for 7ft height
Diesel fuel oil tank level sensor with 0 to 5 volt analog output signal for measuring contents in storage tanks up to 7 feet in height.
DNV / GL marine certified submersible seawater level transmitter for 0-3 metre depth
Marine approved sea water level sensor for monitoring a 3 metre change in salt water depth.
50m seawater depth and temperature sensor with SDI-12
SDI-12 digital interface liquid level and temperature sensor for submerging in seawater water to depth of up to 50 metres.
SDI-12 freshwater submersible pressure sensor for measurement up to 5 metres
SDI-12 digital output submersible sensor for use in fresh water with a range between 0 and 5 metres of water column.
2 meters of freshwater depth, submersible pressure transmitter
Fresh water submersible pressure sensor with 4-20mA output for measuring 0 to 2m of fresh water depth.
1 bar submersible water depth sensor with 4 to 20mA output
4-20mA submersible water pressure transmitter for measuring water depth down to 1 bar.
IP68 sewage level transmitter for monitoring up to 6 metres depth of waste water
Submersible ATEX approved liquid level sensor with a 4 to 20 milliamp output for measuring 0 to 20 feet of sewage.
2 mWC waste water submersible pressure transmitter with 1/2 BSP female fitting
4 to 20 milliamp output submersible wastewater pressure sensor for installing on 1/2 BSP thread pipe fitting
RS485 submersible wastewater level and temperature sensor for 3 metre depth
Submersible waste water level and temperature probe with integral RS485 interface electronics for monitoring wastewater depth up to 3 meters.
Freshwater 2 metre river depth submersible probe with 4-20mA output
Fresh water level sensor for submersing in rivers with a hydrostatic pressure range for measuring water depth up to 2 metres.
Battery powered, 10m range, diesel oil tank level gauge with submersible probe
Combined digital pressure gauge and submersible level sensor for measuring the quantity of diesel or oil present inside industrial storage tanks up to 10 meters high.
150m freshwater submersible pressure sensor with 10v output
Voltage output fresh water submersible pressure sensor for measuring borehole well depth from 0 to 150 metres of water column.
CIP protected dairy sensor for measuring level of milk in 6m high tank
4-20mA output sensor for measuring the volume of milk in a milk silo which is 6 metres high.
Low power consumption fuel tank level sensor
IMTG is a low cost OEM submersible level transmitter which is typically used in applications that require diesel fuel level measurement in small tanks.
Water depth and temperature transmitter for 700 foot deep borehole
I want to measure water depth and temperature in a bore hole to a depth pressure of 700 ftH2O.
Small diameter dip well water level transducer
We are searching for a transducer for to monitor water in an upland bog
Sea water corrosive resistant underwater level transmitter
We need a hydrostatic level transmitter for immersion under sea water.
Fresh water compatible submersible 1mH2O range 4-20mA output pressure sensor
What submersible pressure sensor should I purchase for measuring a hydrostatic pressure of fresh water up to 1 metre?
Hygienic atex approved 100mbar pressure transmitter for pharmaceutical application
Hygienic ATEX approved pressure transmitter for zone 2 to read pressures from 15 to 25mbar.
Level transmitter for waste water tank 10 feet deep
I am looking for a liquid level measurement device for use with wastewater effluent to depth of 10 feet.
Portable battery powered tank level gauge with submersible sensor
Is there anything portable that could be dropped into different sized and irregularly shaped tanks to measure the amount of change in liquid height?
300 cm water level sensor for submersing in tank
We are looking for a level sensor for submerging into a water tank to measure a level between 10 and 300 cm.
Submersible sensor for measuring sludge pressure in pipe
Submersible pressure sensor to measure 10 bar pressure in pipe that is IP68 for long term submersion in sludge up to 6 metres deep.
Problem with zero drift when installing submersible pressure sensor
I‘m having a problem zeroing a submersible pressure sensor. Before placing it in the water, the zero offset is trimmed on the indicator, and then it is submerged to full range depth of 10 metres. During the first few minutes we notice that the full scale reading drifts by about 10mm in the negative direction […]
Protecting low range river level sensor from storm surges
I’m looking to monitor the depth of water in a river up to around 1 metre deep, but occasionally there is a storm and the river swells to a depth of 10 metres.
Pond water level gauge with battery power
Do you have a battery operated solution to measure the level of a Water pond?
Genset hydrostatic sensor for measuring level of small diesel tank up to 12 inches
Hydrostatic type sensor for submerging inside Genset fuel tanks to measure the level of diesel
Measuring 125 mm of water level range to 1mm accuracy
We are looking to measure liquid level to an accuracy of 1mm over a range of around 125mm.
Using Hydrostatic Pressure Transducers for Measuring Fluid Level
There are a number of methods and technologies for measuring the level of a fluid with hydrostatic pressure transducers.
Are all IP68 Water Resistant Protection Ratings the same
It is often assumed that devices with an IP68 rating are suitable for immersing underwater for an indefinite period at any depth. Not all devices that are IP68 are intended to be continuously submerged, some only require a temporary rating to protect from occasional submersion. For example a pressure transmitter installed below ground level will […]
Determining the Signal Cable Length of a Suspended Liquid Level Transducer
Deciding the correct length of cable for a suspended IP68 transducer is an important part of specifying, if the cable is too short it is difficult and expensive to join two cables together and make the seal liquid tight. There are two separate parts of the installation that need to be considered to determine the […]
Why are Submersible applications so demanding of Pressure Transducers?
Placing a sensing device in a liquid is one of the most hostile environments to ensure a long reliable service life. The extra considerations for design engineers include: Keeping pressurised liquid out. Preventing condensation damage to the internal electronics. Corrosion protection for all the materials used in the transducer construction. Adequate protection from lightning surges […]
Considerations for monitoring Landfill Water Level
In recent years regulations for environmental control, health and safety issues have become much more stringent for existing and new landfill sites. The regulations encompass many considerations and some involve the measurement and control of water level in many positions around a waste disposal site. One application is ensuring contaminated water is contained within a […]
Improve the electrical termination of vented submersible pressure sensors
Submersible cable is more expensive because it has to be reinforced to support the sensor plus its own weight in deep holes without stretching which would lead to a change in sensor position and ultimately sensor calibration. A submersible cable also has a vent tube running through it to allow gauge reference pressure sensors access […]
Using a screw-in or waterproof pressure transmitter to measure liquid level
The first step in selecting a pressure transmitter for liquid level measurement is to determine whether to submerge or mount the sensor externally.
Using absolute pressure sensors to measure hydrostatic level
Venting a gauge reference hydrostatic pressure sensor to the outside air is not always possible and an absolute reference sensor has to be used instead.
IMCTL Submersible Liquid Level and Temperature Transmitter
IP68 combined liquid level and temperature, dual 4 to 20 milliamp output pressure sensor with a 316L or Marine Bronze housing.
IMTG Low Cost OEM Submersible Tank Gauging Level Sensor
Economical pressure transducer for monitoring fluid level inside a tank where there is no external mounting point at the bottom of the tank.
SWL Marine Bronze Submersible Level Sensor
Analogue output sensor for immersing in seawater to determine depth or change in water level by measuring hydrostatic pressure.
S12C SDI-12 Seawater Pressure & Temperature Transducer
SDI-12 protocol transducer for sensing water depth level and temperature in seawater, brackish water, tidal water, saline water or leachate.
S12S SDI-12 Coms IP68 Pressure and Temperature Sensor
Combined pressure and temperature sensor with a 1200 baud rate serial data interface as defined by the SDI-12 support group.
LMK458 Marine Approved Hydrostatic Level Transmitter
Marine approved level transmitter with 4-20mA output for measuring level of contents inside ship ballast, fuel, liquid cargo or wastewater tanks
ATM/N Titanium Submersible Hydrostatic Pressure Transmitter
All Titanium submersible pressure transmitter for measuring the hydrostatic level of leachate, brackish water or sea water. Ranges from 1 up to 250mWC.
IMCL Submersible Absolute Reference Depth Sensor
Absolute reference hydrostatic depth sensor with an IP68 sealed electrical interface, SS316L, Duplex or PVC housing and a mV, voltage or current output.
IMCL IP68 Millivolt Output Level Sensor
Millivolt strain gauge output signal hydrostatic level sensor with an IP68 sealed electrical connection, stainless steel 316L, Duplex or PVC housing.
LMK306 Ground Water Level Transmitter
IP68 sealed hydrostatic level transmitter with a 17mm diameter for lowering into ground water boreholes for environmental monitoring of water level.
LMK382 Low Range IP68 Waste Water Level Transmitter
Submersible Low Range waste water level transmitter with intrinsically safe option for monitoring the level of sewage and effluent in water treatment plants.
LMK807 Plastic Submersible Level Transmitter
IP68 mid range pressure transmitter for measuring the level of highly contaminated and aggressive liquid media with a body made from PP-HT.
LMK809 Plastic Submersible Low Level Transmitter
IP68 low range pressure transmitter for measuring the level of highly contaminated and agressive liquid media with a body made from PP-HT or PVDF.
DMP457 Marine Approved Pressure Transmitter
Marine approved stainless steel diaphragm pressure transmitter with 4-20mA current loop output for shipbuilding in ranges from 100mb to 600 bar gauge or absolute.
DMK457 Marine Approved Pressure Transmitter
Marine approved pressure transmitter with 4-20mA current loop output for shipbuilding with optional CuNiFe housing for sea-water compatibility
CNS Submersible Low Level Transmitter
Immersible low pressure sensor for measuring shallow liquid level with a rangeable 4-20mA current loop or high level voltage output signal.
LMP307 Submersible Level Transmitter
Submersible level transmitter for measuring liquid level with a 4-20mA current loop or a 0-10V voltage output plus optional ATEX approval for intrinsically safe use in hazardous areas in ranges from 1mH2O up to 250mH2O. The LMP307 is suitable for use on potable water with no leaching, and can be supplied with a drinking water certificate according to DVGW and KTW.
How to reduce submersible pressure sensor failures caused by moisture ingress
One of the main causes of failure in submersible applications of pressure transducers and transmitters is moisture ingress.