An introduction to the dp flow method of using a differential pressure sensor for measuring the flow of liquids and gases.
SqRt Extraction
DPT200 High One Side Overload Differential Pressure Sensor
DP transmitter for measuring pressure difference between two pressure points which can tolerate up a very high overload pressure independently on either the positive or negative side port or both together at the same time.
DP Flow Transmitter Output Calculator
This differential pressure flow transmitter square root extraction 4 to 20 milliamp current output calculator provides a way to determine the flow output reading from the pressure drop measured across an orifice plate and the differential pressure transmitter range.
Pitot tube air flow calculation 1000 hPa differential pressure transmitter
Air flow differential pressure transmitter for measuring difference between pitot tube and static port pressure up to 1000 hectopascals.
DPS300 User Switchable Pressure Range, Volts or Current Output Low DP Sensor
The DPS 300 is a low range HVAC differential pressure sensor. The lowest possible pressure range is 0…100 pascals. 2 or 3 switchable pressure ranges, plus volts or current output are included with most standard configurations.
10 kPa orifice plate differential pressure transmitter for water flow measurement
Pressure sensor for measuring the differential pressure generated by water flowing through an orifice plate in a pipe, and converting the output to a water flow measurement.
DPT200 Pressurised Tank Level Differential Pressure Transmitter
Pressurised tank liquid level differential pressure cell transmitter for process plant storage.
250″wc Orifice plate flow measurement dp transmitter
This differential pressure (dp) transmitter can be used to measure the difference in upstream and downstream flowing pressure either side of a orifice plate.
Universal Strain Gauge Bridge Input Transmitter – STRAIN
The STRAIN universal strain gauge bridge input transmitter can connect any strain gauge loadcell or pressure transducer & provide a mA or volts output
ISOCON Universal Analogue Measurement and Control Signal Input to Output Converter
The ISOCON Isolating Signal Converter can accept inputs including 20mA, TC, RTD & voltage signals. The units produce an isolated high level DC output of voltage or current.
How do you measure flow rate with a dp cell
How do you use a dp cell measuring a span of 0-500 mmH2O with an o/p of 4-20 mA to control a flow rate of 0-1000 L/h for a flow meter range?
Square Root Extraction Input to Linear Output Converter
This sqrt extraction input to linear output converter provides an easy way to determine the ideal linear output for any given sqrt input value.
Linear Input to Square Root Extraction Output Converter
This linear input to sqrt extraction output converter provides an easy way to determine the ideal sqrt output produced for any given linear input value.
DPS Low Differential Pressure Transmitter
Ultra low differential pressure transmitter for HVAC applications with 4-20mA current loop or amplified voltage output signal in pressure ranges from 0.1 mb up to 1 bar differential.
Square Root Extraction
Square Root Extraction is a mathematical process which is applied to a linear measurement scale to convert it to a non-linear square root scale.
SqRt Extraction 4-20mA Signal to Measurement Reading Converter
This tool will convert a sqrt 4-20 milliamp signal to a linear measurement over a specified measurement range and show a related conversion scale.
Measurement Reading to SqRt Extraction 4-20mA Signal Converter
This converter will convert any reading to a sq rt extraction 4-20mA signal. A sqrt 4-20mA conversion scale is also displayed for each measurement range.
0-20mA square root extraction to linear 0-100% scale conversion table
How do you convert a square root extraction 0-20mA analog signal to a linear 0-100% scale?
DP transmitter with for measuring 300inH2O gas flow across orifice plate
DP transmitter that can be used to measure the pressure drop over 0 to 300 inH2O of gas flow through an orifice plate
4-20mA square root extraction conversion to linear % full scale
How do you convert a square root extraction 4-20mA analog signal to a linear 0-100% scale?
Digital Output Square Root Extraction Formula and Tables
Square root extraction signals are used to simplify closed pipe liquid or gas flow calculations and to improve resolution of the non-linear signal when converted to a flow reading.
Converting 4 to 20mA Linear Signal to and from Square Root Extraction Signal
The flow rate along a closed pipe is directly proportional to the square root of the pressure drop or differential pressure between two points.
XMD Process Plant DP Cell Differential Pressure Transmitter
Rangeable DP Cell current loop process transmitter for monitoring differential pressures in a heavy duty process plant environment.