Digital submersible stainless steel liquid level sensor with a Modbus RTU protocol RS 485 serial bus interface.
USB ready digital pressure sensor for recording pressures with a high speed sample rate of up to 1 kHz to a computer. The UPS-HSR is supplied with a 2m long USB cable, PC software and case. Choose a pressure range from 2.5 bar up to 5000 bar with a G1/4 or 1/4 NPT male up to 1500 bar, and AE F-250-C female up to 5000 bar.
Groundwater, tank & reservoir water level detachable submersible cable hydrostatic liquid level sensor for multiple municipal water level measurement locations.
Water resistant pressure sensor for measuring hydrostatic pressures in the range of 0-0.5 mWC up to 0-100 mWC.
Stainless steel 316L waterproof probe for measuring both water temperature and depth and generating two separate 4-20mA current loop measurement signals.
DMP343 pneumatic pressure sensor for measuring very low range pressures on pneumatic control systems, heating, ventilation and air conditioning systems (HVAC) .
Three in one electronic pressure switch, digital pressure gauge and pressure sensor with pressure ranges from 100 mbar up to 600 bar (1.5 to 9000 psi).
IP68 protect pressure sensor for monitoring potable water level to depths of 100 metres.
Stainless steel pressure transmitter with ranges from 100mbar up to 40 bar gauge or absolute. Special options for ATEX , SIL2 and compound ranges.
Low cost sensor for measuring small pressure ranges from 0-50 mbar (10 inH2O) to 0-1000 mbar (15 psi) of liquids or gases.
Piezoresistive strain gauges are a semiconductor material which changes in resistance when the material stretched or compressed.
Silicon Pressure Sensors have silicon diaphragms which have a very high elasticity and semiconductor strain gauges which produce a high span sensitivity.
Silicon on Insulator (SOI) is a type of material technology which can be utilised in the manufacture of pressure sensor diaphragms to allow operation at higher temperatures.
I need to replace 2 Ashdown Control pressure transmitters in an existing system.
Submersible level transmitter for measuring liquid level with a 4-20mA current loop or a 0-10V voltage output plus optional ATEX approval for intrinsically safe use in hazardous areas in ranges from 1mH2O up to 250mH2O. The LMP307 is suitable for use on potable water with no leaching, and can be supplied with a drinking water certificate according to DVGW and KTW.
All in one electronic switch, gauge and sensor designed specifically for use in the food, drink and biomedical industry for measuring process pressures.
The DMP 333 is a stainless steel 316L wetted parts pressure sensor for high pressure ranges on applications such as hydraulic test benches, presses, and hydraulic actuation.
Digital pressure sensor with 3 separate channels for measuring P1, P2 and DP readings plus 2 temperature channels.
Low range three in one pressure switch, pressure indicator and pressure sensor for use on pneumatics and HVAC applications.
High precision differential pressure transducer with accuracy of 0.1% full scale. Available with RS485, USB or RS232 for connecting to a computer.
High precision pressure transducer with an accuracy of 0.05% full scale with a RS485, USB or RS232 digital interface for connecting to a PC.
High precision compact wet wet differential pressure transmitter with digitally corrected output signal in ranges from 1 to 30 bar
High pressure differential sensor with high over-pressure in scaleable differential ranges from 3 bar up to 300 bar differential.
ATEX approved silicon pressure sensor for intrinsically safe use in hazardous areas with a 4-20mA current loop output in pressure ranges from 250mb up to 60 bar gauge