Mobile network communications and multichannel sensor signal input conditioner for installing in remote above or underground locations without a nearby power source or signal cables.
Signal Conditioners
Sensor conditioner product information and help for instruments used to process sensor signals. These instruments are used for signal isolation, conditioning, amplification and wireless transmission of connected sensors.
1-5Vdc output, 2.5m range, salt water ballast tank level sensor
We want a 1-5Vdc output submersible pressure sensor which is seawater compatible to monitor the level of a salt water ballast tank over a range of 0 to 2.5 metres.
Universal Strain Gauge Bridge Input Transmitter – STRAIN
The STRAIN universal strain gauge bridge input transmitter can connect any strain gauge loadcell or pressure transducer & provide a mA or volts output
SLIMCON-6 Compact Volts/Current Signal Converter
The Slimcon-6 Signal Converter is the ultimate low cost, high accuracy compact signal converter.
Loop Powered 4-20mA to Current/Volts Isolator – 420i & 420V
The 420i loop powered isolator is a 0(4)-20mA dc isolator, and power is derived from the input signal and therefore requires no external power supply.
RAMPORT Remote Asset Monitoring Modem with I/O Expansion Port
The RAMPORT is a small and cost effective method of monitoring remote plant and equipment from any PC or internet enable terminal loaded with a standard web browser.
ISOCON Universal Analogue Measurement and Control Signal Input to Output Converter
The ISOCON Isolating Signal Converter can accept inputs including 20mA, TC, RTD & voltage signals. The units produce an isolated high level DC output of voltage or current.
Converting 3 wire to 4 wire isolated output signal
I have a 3 wire pressure transducer with a 0-10 volt output, and I need to isolate supply from output so the supply ground is separate to output ground.
SCU for Isolating signal from sensors and trimming zero and full span
Can you suggest a universal signal conditioning unit for isolating a sensor & providing local calibration adjustment for trimming zero & full scale output?