A low powered telemetry system water level sensor for submerging in irrigation water channels or storage dams and measuring the depth over a range of 0 to 10m from the nose cone, and sending the reading via a SDI-12 serial interface through the submersible cable electrical connection.
A data acquisition compatible level sensor for submerging in a lake stilling well and measuring the depth over a range of 0 to 3ft from the nose cone, and sending the corresponding reading via an SDI-12 serial interface through the submersible cable electrical connection.
A shallow depth submersible liquid level sensor for submerging in a stream and measuring the depth over a range of 0 to 2ft from the nose cone, and sending the corresponding level reading via the SDI-12 interface through the submersible cable electrical connection.
A submersible water level sensor for submerging in a lake and measuring the depth over a range of 0 to 2m from the nose cone, and sending the corresponding SDI-12 signal through the submersible cable electrical connection.
This low power consumption SDI-12 interface sensor will measure the water level of roadside creeks and streams to sense the level of flooding.
20 metre range level probe with an SDI-12 protocol serial digital interface for submerging near to the shore to monitor tidal changes.
SDI-12 data interface hydrostatic water level sensor for monitoring the depth of water in a Class A evaporation pan.
This guide will help you choose a digital output pressure sensor for your application and explain the benefits of using a digital interface to transmit pressure readings.
We are looking for an immersion gauge sensors with vented cable for measuring the level of oil.
The S12C is a submersible level probe with a SDI-12 protocol signal interface and has the option to measure absolute pressure rather than venting to air pressure above the water surface.
The most popular device is the S12S submersible level transmitter with SDi-12 output, this can be supplied with various measurement ranges and cable lengths to suit the installation. There is also the S12C which is a ceramic based sensor with a Marine Bronze housing which is suitable for permanent submersion in estuary and seawater installations. […]
USB interface IP68 pressure sensor to accurately indicate the depth and temperature of fresh water up to 10 metres water depth.
This probe has a SDI-12 digital interface which is standardised protocol for environmental monitoring instrumentation.
Hydrostatic level & temperature measurement submersible probe for measuring freshwater up to 10m (32.8ft) & temperatures -20 to +60 degC via USB.
Lake water level sensor for immersed installations to measure the quantity of water in a lake with a low power consumption SDI-12 interface.
SDI-12 digital interface liquid level and temperature sensor for submerging in seawater water to depth of up to 50 metres.
SDI-12 digital output submersible sensor for use in fresh water with a range between 0 and 5 metres of water column.
SDI-12 protocol transducer for sensing water depth level and temperature in seawater, brackish water, tidal water, saline water or leachate.
Combined pressure and temperature sensor with a 1200 baud rate serial data interface as defined by the SDI-12 support group.