DP transmitter for measuring pressure difference between two pressure points which can tolerate up a very high overload pressure independently on either the positive or negative side port or both together at the same time.
A digital display combine with a rangeable externally mounted liquid level sensor for measuring the height of wastewater over a range of 0 to 140in from the 1/4 NPT male process connection, and sending the corresponding 4-20mA signal through the M12 connector electrical connection.
HART communications enabled 4-20mA output hydrostatic level sensor with a range of 0 to 7 metres of water column.
The DPS 300 is a low range HVAC differential pressure sensor for measuring pressure drops across air filters and airflow through and between ventilation ducts. The lowest possible pressure range is 0…100 pascals and the highest is 0…1000 millibars. User switchable 2 or 3 pressure ranges and volts or current output are included with most standard configurations.
Pressurised tank liquid level differential pressure cell transmitter for process plant storage.
We are looking for level measurement gauge transmitters for water tanks used for domestic water and fire water in a hotel.
The 36 X W is a high accuracy sensor with analogue 4-20mA / 0-10Vdc or digital RS485 output for submersing into a liquid to measure depth.
Three in one electronic pressure switch, digital pressure gauge and pressure sensor with pressure ranges from 100 mbar up to 600 bar (1.5 to 9000 psi).
High precision pressure transmitter with an accuracy of 0.1%FS BSL NLHR and digitally adjustable pressure ranges from 400mb up to 40 bar gauge & absolute.
Rangeable describes a type of measurement instrument that has an output signal which can be adjusted by the operator to a different scaling.
Turndown Ratio describes the difference between the highest and lowest possible span of measurement output which can be set for a sensing device with a rangeable output signal such as 4 to 20mA output which is HART enabled.
Rangeable submersible depth transmitter with a digital interface for re-ranging to any depth down to 10 m max.
HART compatible, ATEX flameproof approved, rangeable level transmitter to measure hydrostatic head of water/glycol or mineral oil fluid within a reservoir about 2 metres in height.
ATEX approved intrinsically safe pressure transmitter with zero & span adjustability over a maximum of 10 bar gauge
4-20 mA signal vacuum transmitter with a 0 to 100 mbara range which can withstand a 5 bar absolute overpressure.
Rangeable high accuracy pressure transducer with a 0-10V output signal, a compound pressure range of -1 to +1 bar (-15 to +15 psi) gauge.
High pressure sensor, electronic switch and digital gauge with an all welded stainless steel flush diaphragm for high viscosity liquids.
All in one electronic switch, gauge and sensor designed specifically for use in the food, drink and biomedical industry for measuring process pressures.
Process transmitter for measuring vacuum, steam, food, pharmaceutical, oil, gas and other pressure readings necessary for the monitoring and control of bulk production processes.
Rangeable DP Cell current loop process transmitter for monitoring differential pressures in a heavy duty process plant environment.
High performance transducer with adjustable scaling for modifying the pressure range for different applications. Ranges from 0-60 bar up to 0-600 bar.
LCD digital pressure gauge powered externally by a 2 wire series 4-20mA current loop or a digital interface.
Highly accurate digitally compensated pressure transducer with G1/2 male flush pressure port.
Digital pressure sensor with 3 separate channels for measuring P1, P2 and DP readings plus 2 temperature channels.
Rangeable Pressure Transmitter with a hygienic all stainless steel construction with LCD digital readout display and optional HART communications.
High precision pressure transmitter for measuring very low vented gauge reference or differential air pressures. Rangeable 4-20mA or 0-10 volt output.
Low range three in one pressure switch, pressure indicator and pressure sensor for use on pneumatics and HVAC applications.
High precision differential pressure transducer with accuracy of 0.1% full scale. Available with RS485, USB or RS232 for connecting to a computer.
High precision pressure transducer with an accuracy of 0.05% full scale with a RS485, USB or RS232 digital interface for connecting to a PC.
Differential pressure transmitter with high over-load capability for measuring low differential pressures from 8mb up to 6 bar differential.
Immersible low pressure sensor for measuring shallow liquid level with a rangeable 4-20mA current loop or high level voltage output signal.
High precision compact wet wet differential pressure transmitter with digitally corrected output signal in ranges from 1 to 30 bar
High pressure differential sensor with high over-pressure in scaleable differential ranges from 3 bar up to 300 bar differential.
Low range differential pressure sensor with rangeable 4-20mA current loop or amplified voltage output signal in pressure ranges from 1.6mb up to 6 bar differential