RS485 Modbus RTU serial interface pressure sensor with exposed all welded stainless steel 316L flush diaphragm in ranges from 100mb up to 40 bar gauge or absolute.
Product Overviews
Product pages with detailed descriptions & related documentation, plus help with specifying, applications & installation.
SSTT Subsea Wet-Mateable Electrical Connector Temperature Transmitter
This RTD based temperature transmitter with subsea connector provides a 4-20mA output signal corresponding to ranges from 0…35 degC (95 degF) up to 100 degC (212 degF ).
SSPT Subsea Wet-Mateable Electrical Connector Pressure Sensor
This stainless steel ceramic sensing diaphragm based subsea connector pressure sensor provides a unamplified ratiometric millivolt output or an amplified analogue output signal corresponding to ranges from 0…1 bar (14.50 psi) up to 400 bar ( 5800 psi).
LMK 858 Plastic Submersible Liquid Level Sensor with Removable Cable
Chemical resistant liquid level sensor with detachable signal cable for measuring quantity of aggressive media such acids and alkalis and sludge in tanks located outside of factory buildings.
DMP 336 Hydrogen (H2) Gas Compatible Pressure Transmitter
All stainless steel 316L welded wetted parts pressure transmitter for measuring hydrogen gas
DPT200 High One Side Overload Differential Pressure Sensor
DP transmitter for measuring pressure difference between two pressure points which can tolerate up a very high overload pressure independently on either the positive or negative side port or both together at the same time.
XSYS-0011 Portable Multichannel Data Logger with Optional Printer and Integrated Transport Case
The XSYS-0011 is supplied as a portable transport case with a CMC Multicon colour touchscreen data logger plus an optional MLP-149 portable printer integrated.
SPT4200 Silicon-on-Sapphire Titanium Pressure Sensor
The SPT4200 pressure sensor has been developed using Silicon-on-Sapphire (SOS) piezoresistive silicon strain gauge circuit housed in a robust stainless steel housing.
DCL 551 RS485 Modbus RTU Submersible Low Range Fuel, Oil & Wastewater Level Probe
Low range digital interface submersible liquid level probe with RS 485 Modbus RTU protocol serial bus communications for measuring level of fuel, oil and wastewater in low fill height open tanks.
DCL 571 RS485 Modbus RTU Submersible 22mm dia Groundwater & Wastewater Level Probe
22mm diameter digital interface submersible liquid level probe with RS 485 Modbus RTU protocol serial bus communications for installing in 1″ diameter tubes to measure groundwater level and measuring wastewater with nose cone removed.
STC-25 Temperature Cooling Adapter
Add-on temperature cooling accessory for isolating temperature sensitive measurement instrumentation with a ¼ inch BSP male thread from temperatures up to 200 degrees Celsius.
DCL 531 Modbus RTU RS 485 Submersible Stainless Steel Liquid Level Sensor
Digital submersible stainless steel liquid level sensor with a Modbus RTU protocol RS 485 serial bus interface.
ECHO Mobile Network Battery Powered Multiple Sensor Telemetry Interface Unit
Mobile network communications and multichannel sensor signal input conditioner for installing in remote above or underground locations without a nearby power source or signal cables.
CCA10002 powerBOX 100-240Vac Mains to 24Vdc, 1A Dual Sensor Power Supply Converter Junction Box
A power supply conversion junction box for converting readily available 100…240 volts ac mains power to a 24 Vdc low voltage supply for up to 2 sensors. All the necessary cable glands and wiring terminals are provided for connecting the wires from the sensors and mains power source to the junction box.
LMK 487 Submersible Ballast Tank and Draught Level Pressure Transmitter
A 22mm diameter titanium body seawater depth and level probe with a 4-20mA output with Lloyds and DNV-GL ship approval, for monitoring the quantity of ballast or the draft of a ship’s hull.
SIAi-8 8 Channel Analogue Signal Input to RS-485 Modbus RTU Interface Converter
8 channel analogue signal to digital interface module for converting voltage or current signal inputs to a single RS-485 communication interface using Modbus RTU transmission protocol.
TPSE All-In-One Temperature Probe and Pressure Transmitter
Combined temperature probe and pressure sensor for mounting on a single pressure port to measure over a temperature range of -50 to +200C (-58 to +392F), and pressure ranges from 0…4 bar g up to 0…600 bar g.
SMC DIISO 11898 / ISO J1939 Protocol CANopen Pressure Sensor
CANopen DIISO 11898 and ISO J1939 protocol digital interface pressure sensor for measuring pressures over a range of 0…0.2 bar up to 0…5000 bar.
IC-LTM Custom OEM Liquid Flow Axial Turbine Flowmeter
The IC-LTM is a customisable fluid flow meter which can be adapted to a oem liquid flow application with an extensive choice of mechanical process fittings, electrical connections, displays and output signals to measure flow speed or flow rate and use as a totaliser.
IC-LPM Custom OEM Liquid Flow Paddle Wheel Flowmeter
The IC-LPM is a customisable fluid flow paddle wheel flowmeter which can be adapted to a oem liquid flow application with an extensive choice of mechanical process fittings, electrical connections, displays and output signals to measure flow speed or flow rate and use as a totaliser.
IC-FMS Liquid Flow Paddle Wheel Flowmeter
The IC-FMS is an industrial paddle wheel flow meter specifically designed for measuring the flow rate of liquids.
UPS-HSR USB Pressure Sensor with High Sample Rate Logging
USB ready digital pressure sensor for recording pressures with a high speed sample rate of up to 1 kHz to a computer.
ProSens Environmental Monitor and Controller
The ProSens environmental monitor and controller is an industrial interface instrument which integrates a transmitter, display, meter and controller functions in one box.
DCT143 IO-Link Interface Mobile Hydraulics OEM Short Length Pressure Sensor
All welded stainless steel IO-Link interface pressure sensor with a low profile for use by mobile hydraulics manufacturers to measure hydraulic pressures up to 600 bar or 9000 psi.
LevCal Submersible Hydrostatic Liquid Level Sensor Calibration Kit
Pressure calibration kit for calibrating a submersible hydrostatic liquid level sensor out of the water using a battery powered automatic pressure controller calibrator to generate and accurate source of air pressure, and the necessary test hose and adapters to attach to the different types and styles of submersible pressure sensor probe ends.
PrimAtü 10 Low Cost Low Range Differential Air Pressure Transducer
The PrimAtü 10 low cost low range differential air pressure transducer can detect and display both positive and negative differential pressure variations of very low low pressure ranges from 0.5 up to 1000 mbar/hPa, and output the pressure as a 4-20mA, 0-20mA or a 0-10Vdc analog output.
DPC Low Range Pressure Controller and Calibrator
The DPC low range pressure controller calibrator measures and generates low range pressures over 1, 10, 100 or 1000 mbar, and can be used as a pressure measurement device or as a test and calibration device for pressure sensors and pressure switches.
DAC Series Piezoelectric Pressure Sensors
The new DAC series allows accurate recording of measured values in extreme situations, such as pressure spikes or pressure surges, pressure gradients during explosions or combustions, e.g. in the case of ballistic measurements or the ignition of internal combustion engines.
DPS300 User Switchable Pressure Range, Volts or Current Output Low DP Sensor
The DPS 300 is a low range HVAC differential pressure sensor. The lowest possible pressure range is 0…100 pascals. 2 or 3 switchable pressure ranges, plus volts or current output are included with most standard configurations.
DMP 335 All Welded Stainless Steel Diaphragm Pressure Sensor
All welded stainless steel diaphragm pressure sensor for mobile hydraulics, refrigeration or oxygen applications. This pressure sensor is available in the ranges from 6 bar up to 600 bar gauge with a 4-20mA or 0-10Vdc output signal.
DMK 458 Seawater Low Range Pressure Transmitter
Sea water corrosion resistant low range pressure transmitter for marine, ship and offshore engineering.
LMP 308 Removable Waterproof Cable Connection Water Level Sensor
Groundwater, tank & reservoir water level detachable submersible cable hydrostatic liquid level sensor for multiple municipal water level measurement locations.
DPT200 Pressurised Tank Level Differential Pressure Transmitter
Pressurised tank liquid level differential pressure cell transmitter for process plant storage.
Chemical Resistant Pressure Sensor Elements for Electronic Devices & Embedded Product Design & Development
Pressure sensor elements with sensing diaphragms made from alumina ceramic (Al2O3) for electronic & mechanical oem integration into measurement & control instrumentation designs.
36XW Digital Submersible Hydrostatic Level Sensor
The 36 X W is a high accuracy sensor with analogue 4-20mA / 0-10Vdc or digital RS485 output for submersing into a liquid to measure depth.
4-20mA Transmitter Data Logging Kit
This 4-20mA transmitter data-logging kit can be connected to any 4-20mA output sensor and generate a record of measurements collected at set time intervals.
Universal Strain Gauge Bridge Input Transmitter – STRAIN
The STRAIN universal strain gauge bridge input transmitter can connect any strain gauge loadcell or pressure transducer & provide a mA or volts output
SLIMCON-6 Compact Volts/Current Signal Converter
The Slimcon-6 Signal Converter is the ultimate low cost, high accuracy compact signal converter.
Loop Powered 4-20mA to Current/Volts Isolator – 420i & 420V
The 420i loop powered isolator is a 0(4)-20mA dc isolator, and power is derived from the input signal and therefore requires no external power supply.
RAMPORT Remote Asset Monitoring Modem with I/O Expansion Port
The RAMPORT is a small and cost effective method of monitoring remote plant and equipment from any PC or internet enable terminal loaded with a standard web browser.
ISOCON Universal Analogue Measurement and Control Signal Input to Output Converter
The ISOCON Isolating Signal Converter can accept inputs including 20mA, TC, RTD & voltage signals. The units produce an isolated high level DC output of voltage or current.
Z-HEAD Wireless Universal Sensor System
A wireless interface system for connecting battery powered sensors to a computer via a central receiver.
DCT 531 Modbus RTU RS485 Pressure Sensor
The DCT 531 digital pressure sensor has a Modbus RTU RS485 interface for transmitting pressure readings over a digital sensor network.
DCT 533 IO-Link Interface Pressure Sensor
The DCT 533 digital pressure sensor has a IO-Link point-to-point communications interface for sending pressure readings to a IO-Link master.
DCT 532 I²C Pressure Sensor for TWI Communication
The DCT532 I²C pressure sensor has a I²C serial computer bus protocol interface for sending pressure readings over addressable digital communications.
70bar/1000psi Benchtop Pneumatic Calibration Pump – ADT917
Manual benchtop pneumatic pressure calibration pump for -1 bar to +70 bar with pressure and vacuum operation and fine adjustment.
DMP320 0.5 msec Fast Response Pressure Sensor
High frequency response pressure sensor with a better than 0.5 millisecond response time and internal digital signal conditioning that samples readings at a rate of 10 kilohertz.
LMK387 Cleanable Sewage and Sludge Pressure/Level Sensor
Rugged and easily cleanable pressure/level sensor for use with waste water sewage or sludge.
LMK 806 Plastic 21mm diameter Submersible Level Probe
The chemical resistant LMK806 submersible level probe is designed for use in confined spaces with aggressive media.
DMK351 Liquid and Gas Resistant Intrinsically Safe Low Range Gauge Pressure Sensor
Intrinsically safe liquid & gas resistant low range pressure gauge reference pressure sensor for CHP, biogas and landfill sites.
100 bar / 1,500 psi Hand Operated Pressure Calibration Pump – ADT918
The 918 Pneumatic Pressure Test Pump is a hand operated pressure pump designed to generate pressure from 95% vacuum to 1,500psi (100bar).
60 psi / 4 bar Low Pressure Calibration Pump – ADT912
Set precise calibration air pressures from 95% vacuum up to 4 bar / 60 psi.
200bar/3000psi Hand Operated High Air Pressure Test Pump – ADT920
Manually generate air pressures up to 200 bar / 3000 psi for pressure testing and calibrating pressure measurement equipment.
140 bar / 2,000 psi Hand Operated Air Pressure Test Pump – ADT919A
Generate air pressure up to 140 bar / 2,000 psi one handed.
2,500 bar / 37,500 psi Hydraulic Pressure Calibration Pump – ADT949
The ADT949 hydraulic ultra-high pressure test pump is a hand operated pressure pump designed to generate pressure up to 37,500 psi (2500 bar).
K114 USB Converter Replacement for K104
The K-114B USB converter for Keller digital pressure sensors and instruments has replaced the now obsolete K-104B USB converter.
DS201 Combined Pressure Sensor, Display and Switch
Ceramic diaphragm diaphragm based pressure sensor, indicator & electronic switch with pressure ranges from 0-0.4 bar up to 0-600 bar.
ATM/T Pressure and Temperature Dual Output Transmitter
Dual analogue output signal transmitter for simultaneous measurement of media pressure and temperature. Pressure 100mb – 1000bar and temp -25 – 100 DegC.
DM01-500-HD High Range Digital Pressure Gauge
The DM01-500 HD high range pressure gauge is available in pressure ranges from 0 to 600, 1000, 1600, 2000 & 2200 bar.
Clean Room Monitor for Air Differential Pressure, Temperature and Humidity – PMDS4
The PMDS4 clean room monitor is designed for positive and negative monitoring of differential air pressure between the inside and outside of a clean room.
DMK 331 Ceramic Diaphragm Industrial Pressure Transmitter
This pressure transmitter can be supplied with a PVDF process connector so that it can be used to measure the pressure of acids and other corrosive chemicals.
WRAS approved water cooler float switch
The RSF54 vertical floatswitch is designed for use with cold drinking water, it is WRAS approved and made from Polypropylene.
High Frequency Response 1000 Hz Sampling Rate Pressure Data Logger
The Triton IT Pressure Transient data logger can detect and log pressure surge data up to 1000 readings per second without interfering with the main recordings.
+/- 6 psi / 0.4 bar Low Pressure Calibration Pump – ADT901
The ADT901 low pressure calibration pump is a hand operated pressure pump designed to generate pressures over +/-6 psi (+/-0.4 bar)
901 Prescal Pressure Switch Specification and Data Sheet
Adjustable pressure switch for monitoring overpressure (5 mbar up to 12 bar), vacuum (-5 down to -700 mbar) or differential pressure (5 to 50 mbar) of liquid, gas and aggressive media. The pressure switch uses a scaled adjustment knob to enable the adjustment of trip and reset pressure without the use of a screwdriver. Page Contents Temperature Range […]
Submersible IP68 Water Pressure Data Logger
P-TRITON-P logger is completely waterproof for flood protection and battery powered with a typical battery life of 10 years.
SRP-N118 Digital Alarm Indicator for Wall Mounting
An easy to install wall mounted digital display for use in high humidity or outdoor environments.
TM Silicon Strain Gauge Pressure Transducer
Passive compensated pressure transducer with a four arm semiconductor Wheatstone bridge circuit which produces a 100 millivolt with a 10 volt excitation.
DL Industrial Pressure Data Logger
Robust industrial self powered logger for recording up to 130,000 pressure values with a minimum logging interval time of 2 seconds.
TS100 Compact Temperature Transmitter and PT100 Probe
All stainless steel compact temperature transmitter with integrated Platinum resistance thermometer (PT100), Measure any temperature -50 to 150 degC.
ATM/N Titanium Submersible Hydrostatic Pressure Transmitter
All Titanium submersible pressure transmitter for measuring the hydrostatic level of leachate, brackish water or sea water. Ranges from 1 up to 250mWC.
x|act i Rangeable Flush Pressure Transmitter with LCD Readout
Rangeable Pressure Transmitter with a hygienic all stainless steel construction with LCD digital readout display and optional HART communications.
2028T Thermometer with Deg C and F for K Type Thermocouples
Portable lightweight thermometer with backlit LCD display for measuring from -200 to +1350 degC (-200 to +392 degF). Compatible with K type thermocouples.
40B48 Strain Gauge Indicator with Relay Switch Alarms
LED digital indicator for wheatstone bridge millivolt and potentiometer input signals with adjustable relay switches for controlling process equipment.
2000T Digital Thermometer for K Type Thermocouples
Handheld battery powered temperature indicator for measuring from minus -200 to +1350 degrees Celsius or -328 to +2462 degrees Fahrenheit.
40B96 Strain Gauge Readout with Process Alarm Relays
LED digital panel readout for strain gauge and potentiometer input signals with configurable process alarms, 5 digit LED display and an accuracy of 0.2%FS.
40T48 Digital Readout with Alarm Relays
LED digital readout display with up to 4 configrable process alarm relays for mounting in a 48mm x 48mm (1/16 DIN) panel cutout.
4T48 Digital Panel Meter
Digital meter with a 4 digit display for mounting in a 48mm x 48mm (1/16 DIN) panel for measuring volts, current, TC, RTD, PTC, NTC or potentiometer signal.
DPG2400 Precision Pressure Indicator
High accuracy desktop pressure gauge for calibration and metrology laboratories with an accuracy of ±0.03% FS covering pressure ranges from up to 400 bar.
6100 Ultra High Accuracy Digital Pressure Sensor
Very highly accurate RS232 or RS485 serial interface pressure transducer with an accuracy of ±0.01% full scale achieved over pressure ranges up to 400 bar.
6000 High Accuracy Digital Pressure Transducer
High precision RS232 or RS485 interface pressure sensor for use as a reference standard for calibration or research purposes.
40T96 Digital Process Alarm Indicator
Digital Readout with alarm relays for mounting in a process or test panel which can be used with pressure transducers & transmitters, thermocouples, RTD, potentiometers, current loop & amplified voltage output sensors.
2400 Multi Channel Digital Indicator
Panel mount LED display instrument with up to 4 sensor input channels, 4 relay or logic outputs, high speed display update and maths function.
DDS High Over-Pressure Differential Pressure Sensor
Differential pressure transmitter with high over-load capability for measuring low differential pressures from 8mb up to 6 bar differential.
CNS Submersible Low Level Transmitter
Immersible low pressure sensor for measuring shallow liquid level with a rangeable 4-20mA current loop or high level voltage output signal.
DRS Low Differential Pressure Transmitter
Low range differential pressure sensor with rangeable 4-20mA current loop or amplified voltage output signal in pressure ranges from 1.6mb up to 6 bar differential
4T96 Digital Panel Process Indicator
Digital Readout with LED display for mounting in a panel which can accept inputs from thermocouples, RTD, potentiometers, current loop & amplified voltage output sensors.
2500 High Performance Digital Controller
Green or Red LED multi-display configurable digital instrument for monitoring and controlling industrial processes.
TDP Plug-In Display for Pressure Transmitters
DIN 43650A plug-in current loop powered LED display with optional ATEX approval for intrinsically safe use in hazardous areas.