Wet/Wet DP Transmitter for measuring differential pressures up to 20 psi diff with a line pressure up to 90 psi.
Pressure Sensors
20,000 psi g digital pressure gauge with 4 to 20 mA output
4-20 milliamp loop powered high range pressure gauge for measuring 0 to 20,000 psi gauge.
12 bar g sea water compatible 4-20mA pressure sensor for use on marine vessels
Marine certified pressure transmitter for measuring seawater pressure up to 12 bar gauge on a marine vessel.
50 millibar hazardous area air pressure sensor with 4-20mA out and 1/2 NPT male fitting
4-20mA output pressure transmitter for measuring air pressures up to 50 mbar gauge in intrinsically safe areas requiring the use of ATEX approved equipment.
1000 mbar vacuum transmitter for use with waste toner dust
Intrinsically safe atex approved vacuum pressure sensing device with a 4-20 milliamp output for mounting in a vacuum header line for carrying waste print toner ink dust.
10 metre high cylindrical oil tank level gauge and transmitter
Sensor and display for converting a pressure reading to a level reading of a 10 metre high cylindrical oil tank.
6 bar g marine approved (DNV/GL) oil pressure transmitter
DNV and GL marine certified 4 to 20 milliamp output pressure transmitter for measuring 0 to 6 bar pressure on lubrication oil pumps.
40 inH2O g OEM pressure transmitter with 4-20mA current output
Low range pressure transmitter for OEM equipment manufacturers. This IMP LR sensor has a 0 to 40 inH2O gauge for use on liquids or gases.
-0.5 to +4 bar g bidirectional air pressure transmitter
Compound range pressure transducer for use on air with a 4 to 20 mA output scaled over a -0.5 to +4 bar gauge pressure range.
300 degC tolerant pressure transmitter for pressures up to 100 kPa g
High temperature pressure transducer with an output signal of 4 to 20 milliamps for measuring pressure up to 100 kPa.
500 mbar vacuum sensor for use on fresh water with 4 to 20 milliamp output
Two wire vacuum transmitter for occasional use on fresh water with 0 to -500mbar gauge range, 1/4″BSP male thread and a 24Vdc supply powered 4-20mA output.
12 bar g range air pressure sensor with 4 to 20mA output
4-20mA output pressure transmitter for measuring dry gas and air up to 12 bar gauge.
10 mmHg suction range 4-20mA output sensor
Suction range current output pressure transmitter for measuring from o to minus 10 mmHg gauge with a 4 to 20 milliamp output signal.
5000 psi g flush all stainless steel 316L pressure transmitter
Flush pressure sensor with a 5000 psi gauge pressure range and a 4 to 20 milliamp current output. This sensor has all stainless steel 316L wetted parts.
800 to 1200 mbar atmospheric pressure transmitter
Absolute pressure transmitter with a 4-20mA output to measure atmospheric pressure in a room up to 1200 mbar absolute.
250 bar pressure transducer with 20 millivolt full scale output
Four wire strain gauge type pressure transducer with a twenty millivolt full scale output with a steady 10 volt supply input.
5 psi delta air pressure sensor with 0 to 10 volt output
Delta pressure transducer for low range air pressure up to five psi with a zero to ten volt output signal.
1 psi delta air pressure sensor with 0 to 10 volt output
Delta pressure transducer for low range air pressure up to one psi with a zero to ten volt output signal.
5 psi delta air pressure sensor with 4 to 20 mA output
Delta pressure transmitter for low range air pressure up to five psi with a four to twenty milliamp current loop output.
1 psi delta pressure sensor with 4 to 20 mA output
Delta pressure sensor for measuring low range differential air pressure up to one psi with a four to twenty milliamp current loop output.
Adjustable range pressure sensor for scaling -1 to +1 bar g
Rangeable high accuracy pressure transducer with a 0-10V output signal, a compound pressure range of -1 to +1 bar (-15 to +15 psi) gauge.
200 degC media temperature pressure sensor with 25 bar g range and 0 to 10 volts output
High temperature pressure transducer with 0-10V amplified output, 0-25 bar gauge pressure range and compatibility with a media temperature up to 200 degC (392 degF)
1 bar absolute pressure transducer with 0-5Vdc for freshwater
Fresh water zero to one bar absolute pressure range transducer with a zero to five volts output signal.
200 bar gradient pressure sensor with RS232 for use on oil
Wet wet digital differential pressure sensor with RS232 communications interface for measuring gradient pressure (pressure in – pressure out) of an oil pump up to 200 bar (3000 psi).
15,000 Pa DP Transmitter with built-in digital display
Differential pressure transmitter with indicator for measuring -15000 to +15000 pascals.
1000 pascal bidirectional range dry gas pressure transmitter
Compound range 4-20mA output pressure transmitter with a -1000 to + 1000 pascals gauge pressure range for use on dry gas.
1.5 inWG differential pressure transducer to control positive pressure inside a building
Low range differential pressure transducer to monitor difference of up to 1.5 inches of water gauge between outside pressure and inside pressure.
10 bar pressure transmitter with integral temperature probe for 0-100degC
Dual 4-20mA output pressure sensor with a 10 bar g pressure range and an integrated temperature probe for measuring 0 to 100 degrees Celsius (212 degrees Fahrenheit).
10 bar absolute pressure transducer with 10Vdc output for use on fresh water
Absolute referenced zero to ten volts output pressure transducer for use on fresh water up to 10 bar abs.
300 mmHg absolute vacuum pressure transducer with 10 volts output
0 to 10 volts dc output absolute pressure transducer for measuring 0 to 300 millimetres of Mercury.
700 to 1100 millibar scaled 4 to 20mA output pressure sensor for barometric pressure measurement
4-20mA output transmitter for monitoring barometric pressure from 700 to 1100 mbar absolute.
Liquid compatible transmitter with 15 psi DP range and protected on either side to 300 psi
Wet/wet dp sensor with a 0 to 1 bar differential pressure measuring range and a 4-20 mA output signal.
2.5 psi g water tank pressure transducer with 10Vdc output
Water tank pressure sensor with a 2.5 psi gauge range and a 10 volt dc output signal.
5000 psi hydraulic pressure transmitter with M12 electrical connector
Hydraulic oil pressure transmitter with an M12 electrical connector for the 4 to 20 milliamp current loop circuit and a measuring range up to 5000 psi gauge.
Seawater and crude oil compatible 75 bar pressure transmitter for marine use
Marine approved 4-20mA output pressure transmitter for measuring a mixture of seawater and crude oil up to 75 bar gauge in a zone 1 hazardous gas area.
Wide barometric range high precision pressure transmitter
High precision 4-20mA output transmitter scaled to a barometric range of 500 mbar (14.76 inHg) to 1200 mbar (35.44 inHg) absolute.
50 psi g air pressure sensor with 10Vdc signal out
Air pressure sensor with a 0 to 10 volts output transmitter for measurements from 0 to 50 psi gauge.
Atmospheric air pressure transducer with 10 volt output
Pressure transducer with 0 to 10 v signal to monitor ambient air pressure in a room accurate to 0.5% range.
Minus 25 mb vacuum intrinsically safe 4-20mA pressure sensor
Current output pressure sensor for use in hazardous areas with a vacuum measuring range from 0 to negative 25 millibar gauge.
ATEX approved negative 10 mbar vacuum pressure transmitter
ATEX certified intrinsically safe pressure transmitter for measuring from 0 to minus 10 millibar gauge vacuum pressure.
20 inH2O low cost stainless steel pressure sensor with 5Vdc output
0 to 5 volt output budget pressure transducer for monitoring low range pressures
100 mbar wet/wet 4 to 20mA differential pressure sensor and display
Differential pressure sensor and local indicator for measuring dp of fluids over the range of 0 to 100 mbar diff
G1/2 flush 60 psig pressure transmitter for thick liquids in Ex zones
Screw-in G1/2 threaded flush diaphragm pressure transmitter with a 0 to 60 psi gauge range
30 inHg absolute RS232 output vacuum range pressure sensor
RS232 serial interface digital pressure sensor for monitoring vacuum pressure over the range of 0 to 30 inches of Mercury column absolute.
1 bar vacuum gauge and sensor with USB plus Labview driver
USB interface digital vacuum gauge and sensor with Labview driver for measuring suction pressure over a negative gauge range of 0 to -1 bar (-14.5 psi).
1kPa diff pressure transducer for building air ventilation monitoring
Differential pressure transducer capable of measuring over 0 to 1 kilopascal for building ventilation applications.
Compound range -1 to 6 barg pressure transmitter & display
-1 to 6 bar gauge compound range pressure transmitter with 4 to 20 milliamp output signal, built-in loop powered digital display.
30 psi absolute vacuum pressure transmitter for process plant installations
Vacuum pressure transmitter with 4-20mA current output for measuring absolute pressure from 0 to 30 psia
10 bar seawater differential pressure sensor for hazardous area
0 to 10 bar differential range pressure sensor for use on a 40 bar sea water pressure line in a hazardous area
100 bar Ex ia 4 to 20mA pressure sensor for 0 to 100 degC media temperature
4 to 20mA output Ex ia intrinsically safe pressure sensor with working range of 0 to 100 bar g for use on gas or fluid in the range of 0 to 100°C, accurate to 0.5% of full range.
1000 psi USB connection pressure transducer for PC data acquisition
Pressure transducer with USB connection and PC software for data acquisition of pressures from 0 to 1000 psi gauge.
150psi freshwater differential pressure sensor & panel indicator
Wet wet differential pressure sensor and digital panel indicator for measuring fresh water pressure from 0 to 150 psi.
100 mmWG negative gauge range vacuum sensor
Vacuum sensor to measure negative gauge pressure from 0 to minus 100 millimeters of water gauge (mmWG) .
0 to -300 mmH2O vacuum transmitter
Vacuum transmitter for measuring 0 to minus 300 mmWC with a 4-20mA output signal suitable for connecting to a loop power supply of 24Vdc.
Swimming pool filtration water pressure sensor
1 bar g range pressure transmitter suitable for use in swimming pool systems that contain a low concentration of Chlorine in the water.
Bidirectional -50 to +50 Pa diff pressure transmitter with user calibration adjustment
Bi-directional 4 to 20 milliamp output pressure transmitter for measuring a diff pressure from -50 to +50 pascals.
60000 psi hydraulic pressure transducer with 0-5Vdc signal out
0-5 volt output pressure transducer with all welded stainless steel construction for measuring very high hydraulic oil pressures up to 60,000 psi.
2.5 bar g pressure transducer with 0 to 5 volts dc output
5 volt output pressure transducer for use on dry gas with a 0 to 2.5 bar gauge pressure range, 3 metre length of signal cable and G1/4 male fitting.
4 microbar resolution pressure transducer with 1 bar range and 10 volt output
0-10Vdc output sensor which can resolve a 4 microbar pressure drop with a test pressure of 1 bar gauge
High resolution minus 150 mbar range pressure transducer
We need to measure vacuum difference from zero to minus 150mbar below atmospheric pressure.
80 kPa suction pressure transducer with current output
Do you have pressure transducers with 4-20 mA output that can measure a suction pressure of 0-80 kPa?
High media temperature tolerant transmitter for high range pressure
pressure transmitter which can measure to a high pressure of 130 bar maximum at a temperature of 300 degC with a high response time to changes in pressure
Fresh water compatible submersible 1mH2O range 4-20mA output pressure sensor
What submersible pressure sensor should I purchase for measuring a hydrostatic pressure of fresh water up to 1 metre?
Liquid compatible 500 psi pressure transducer with a 5 volt output
I’m looking for a voltage output 0 to 5 volts dc pressure transducer with a pressure range of 500psi gauge for use on a liquid media.
Hygienic atex approved 100mbar pressure transmitter for pharmaceutical application
Hygienic ATEX approved pressure transmitter for zone 2 to read pressures from 15 to 25mbar.
DP transmitter with for measuring 300inH2O gas flow across orifice plate
DP transmitter that can be used to measure the pressure drop over 0 to 300 inH2O of gas flow through an orifice plate
How to get a 10 volt signal from a 4-20mA output pressure sensor
I have a 4 to 20mA pressure sensor, is there a way of converting the output to a 10 volt signal so I can use a voltage input data acquisition card?
USB pressure sensors for detecting water leaks & restrictions
I have a research problem where I need to detect leaks and obstructions in a pipe network
2 bar water pressure difference sensor and single input process indicator
I am looking to measure the pressure difference across a water cooler with a maximum diff pressure of 2 bar
Helium and Nitrogen compatible 150bar range current loop output pressure sensor
We are looking for current loop pressure sensors with a range of 0-150bar to measure pressure in a Nitrogen and Helium environment
3000 psig hydraulic transducer and ac powered digital readout
I need a hydraulic transducer that measures pressure up to 3000 psi pressure units with a separate digital read out that can be located away from the transducer.
DP sensor for -1 to 3 bar differential water pressure and 16 bar overpressure
I am looking for a 4-20mA output DP sensor with a -1 to 3 bar differential range for use on water. The sensor will need to withstand an overpressure of 20 bar on the positive side and 1.5 bar on the negative side.
Wet wet DP sensor for 10 inches of water range
We are interested in a Low pressure differential pressure sensor and need a wet/wet in a 10″ H2O range
Argon gas pressure sensor for 0-20mbar above atmospheric pressure
We are looking to measure Argon pressure in a pipe flow which should be in the range of 20 mbar above atmospheric.
Read, transmit and trip Methane gas pressure between 0-160mb g in one device
I am looking for a 4-20mA pressure transmitter device for measuring the pressure of methane (CH4) gas up to 160 mbar gauge.
One transmitter for measuring steam temperature to 150°C and pressure to 4kg/cm² g
The steam pressure range will be from 0 to 4 kg/cm2g and the temperature range will be 0-150 degC. Is there a product available which can do this?
Submersible sensor for measuring sludge pressure in pipe
Submersible pressure sensor to measure 10 bar pressure in pipe that is IP68 for long term submersion in sludge up to 6 metres deep.
Problem with zero drift when installing submersible pressure sensor
I‘m having a problem zeroing a submersible pressure sensor. Before placing it in the water, the zero offset is trimmed on the indicator, and then it is submerged to full range depth of 10 metres. During the first few minutes we notice that the full scale reading drifts by about 10mm in the negative direction […]
Atmospheric range for 4-20mA pressure sensor
Do you have 4-20mA pressure sensor that can be used to measure ambient atmospheric pressure? Yes, the DMP331 has the option for a 4-20mA output scaled from 800 to 1200 mbar, but you can also specify a different scaling if necessary here.
What is difference between working, burst and over pressure
I have a confusion regarding the difference between the maximum working pressure, overpressure and burst pressure for pressure transmitters.
3 wire 4 to 20mA pressure transmitter to measure 100 mbar
We are looking for a pressure transmitter with a range from 0 to 100 mbar and a 4-20mA output with a 3 wire electrical connection
How to Connect a 4-20mA Current Loop Pressure Transmitter
All devices connected to make up a 4 to 20 milliamp current loop are connected in series.
Symptons and Causes of Damage to Pressure Transducer Diaphragms
It is possible to view part of the diaphragm on most pressure transducers and some which are completely exposed such as flush diaphragms are particular vulnerable to mechanical damage.
Stainless Steel Pressure Sensors
There are many materials used for constructing pressure sensors, but those made from stainless steel are considered the most reliable and durable.
Why are Submersible applications so demanding of Pressure Transducers?
Placing a sensing device in a liquid is one of the most hostile environments to ensure a long reliable service life. The extra considerations for design engineers include: Keeping pressurised liquid out. Preventing condensation damage to the internal electronics. Corrosion protection for all the materials used in the transducer construction. Adequate protection from lightning surges […]
Transforming a 2 wire Current Loop into a Voltage Output Signal
If you are running a signal cable over a long distance or have a spare current output pressure transmitter, it is possible to convert the output signal to a voltage type to make it compatible with voltage only input devices. A typical current output is 2 wire 4 to 20 mA which is designed to […]
Does the type of Engineering Units matter for Pressure Transmitters
When selecting a part number for a pressure transmitter you will need to choose a pressure range. Usually a manufacturer will designate pressure ranges in the most common unit used by it’s customers. For the USA the most common unit is psi and for Europe it is bar, but what if you are working with […]
Considerations for monitoring Landfill Water Level
In recent years regulations for environmental control, health and safety issues have become much more stringent for existing and new landfill sites. The regulations encompass many considerations and some involve the measurement and control of water level in many positions around a waste disposal site. One application is ensuring contaminated water is contained within a […]
Incompatible Pressure Sensor Specifications
We occasionally receive requests for combinations of pressure sensor features that are not practical to include in the same specification. Below is a list of the most requested parameter combinations that are declined including explanations. Low Pressure Range with High Media Temperature – the thin and large diameter diaphragms used in the construction of low […]
Why do you have to select an elastomer seal material for some types of pressure sensor?
When selecting pressure sensor options, occasionally you will come across a choice of seal materials to choose depending on the sensor design. An all welded construction provides a high integrity and homogeneous material design. The main disadvantages of this kind of sensor design is the lack of flexibility to customise for different applications, induced measurement […]
What is the difference between a pressure transducer and a transmitter
When browsing through pressure measurement products you will notice that some are called pressure transducers and others are called pressure transmitters.
Digital sensor for high precision pressure calibration
The alternative to expensive high accuracy pressure control calibrators is to use a high precision digital pressure sensor.
What affects the performance of low pressure sensors
By their nature low range pressure sensors are very sensitive instruments and there a few factors that need to be considered prior to and during installation.
Supply voltage and load resistance considerations for pressure transmitters
In order for any pressure transmitter to function within designed performance levels, a min. supply voltage must be maintain device operation.
Determining the hydrostatic pressure range for a tank level sensor
There are many ways to measure the height of a fluid and one of the most popular is to use a pressure sensor.
Understanding operating temperature limit specifications for pressure transducers
Understanding the temperature limitations of a pressure transducer will help you extend the service life and prevent premature failures.
DPS200 HVAC Differential Pressure Transmitter
Differential air pressure sensor with a 10 volt or a 4-20mA output for building ventilation applications. Ranges from 0 to 6 mbar up to 0 to 1000 mbar.
DS201P High Range Flush Pressure Gauge, Switch and Sensor
High pressure sensor, electronic switch and digital gauge with an all welded stainless steel flush diaphragm for high viscosity liquids.
DS200P Sanitary Low Range Pressure Gauge, Switch and Sensor
All in one electronic switch, gauge and sensor designed specifically for use in the food, drink and biomedical industry for measuring process pressures.
ASMT Miniature Combined Temperature and Pressure Transducer
1/2 inch diameter sensor for measuring both temperature and pressure in one device.