A oxygen clean intrinsically safe absolute pressure transducer for research use to measure pressure of oxygen over a range of 0 to 150 psi abs from the 1/4 NPT male process connection, and sending the corresponding 4-20mA signal through the DIN plug electrical connection.
Pressure Sensors
7.5 psig RS485 Modbus RTU digital pressure sensor for leak testing use
A fine resolution digital pressure sensor for leak testing use to measure pressure of dried air or nitrogen in sealed steel tanks over a range of 0 to 7.5 psi g from the G1/4 male process connection, and sending the corresponding RS485 Modbus RTU signal through the weatherproof cable electrical connection.
20 barg 4-20mA output 200degC steam pressure sensor for process control use
A hi-temp media 200°C/392°F max gauge pressure sensor for process control use to measure pressure of steam over a range of 0 to 20 bar g from the 1/2 BSP flush diaphragm male process connection, and sending the corresponding 4-20mA signal through the M12 connector electrical connection.
600 barg 4-20mA output wastewater pressure sensor for experimental component testing
A high range gauge pressure sensor for experimental testing use to measure pressure of wastewater over a range of 0 to 600 bar g from the 1/4 NPT male process connection, and sending the corresponding 4-20mA signal through the DIN plug electrical connection.
600 barg freshwater booster pump pressure switch, gauge and transmitter
Digital display pressure switch, gauge and transmitter for pipe mounted use in freshwater booster pump measurement applications, capable of measuring 0 to 600 bar g pressure with 0.35% accuracy and connected using a 1/4 BSP P male fitting.
-2 to 2 inHg g 4-20mA out intake and exhaust air pressure sensor for building management use
A high accuracy bidirectional range gauge pressure sensor for building management use to measure pressure of air intake and exhaust over a range of -2 to 2 inHg g from the 1/4 NPT male process connection, and sending the corresponding 4-20mA signal through the waterproof cable electrical connection.
1000 barg 4-20mA output synthetic oil pressure sensor for hydraulic pump controls
A high range pressure sensor for hydraulic pump use use to measure pressure of synthetic hydraulic oil over a range of 0 to 1,000 bar g from the G1/2 male process connection, and sending the corresponding 4-20mA signal through the DIN plug electrical connection to a microprocessor.
-200 to 200 Pa bi-directional range 4-20mA output dp pressure transmitter for venturi tube
A bidirectional low range pressure transmitter for venturi tube use to measure pressure of air in a venturi tube over a range of -200 to 200 Pa from the 6.6mm dia x 11mm barbed connections process connection, and sending the corresponding 4-20mA signal through the M12 x 1.5 cable glands with 5 internal screw terminals electrical connection.
0-50 mbarg 4-20 mA output natural gas monitoring pressure sensor
Economical stainless steel diaphragm pressure sensor with semiconductor strain gauges for measuring natural gas pressure over a 0-50 mbar gauge pressure range and generating a 4 to 20 milliamps output signal.
350 bar, 5000 psi Range 0-10 V, 0-5 V, 1-5 V Output Pressure Sensors
0…350 bar or 0…5000 psi pressure range, 0…10 V, 0…5 V, or 1…5 V output signal pressure sensors.
250 bar, 3500 psi Range 0-10 V, 0-5 V, 1-5 V Output Pressure Sensors
0…250 bar or 0…3500 psi pressure range, 0…10 V, 0…5 V, or 1…5 V output signal pressure sensors.
160 bar, 2500 psi Range 0-10 V, 0-5 V, 1-5 V Output Pressure Sensors
0…160 bar or 0…2500 psi pressure range, 0…10 V, 0…5 V, or 1…5 V output signal pressure sensors.
35 bar, 500 psi Range 0-10 V, 0-5 V, 1-5 V Output Pressure Sensors
0…35 bar or 0…500 psi pressure range, 0…10 V, 0…5 V, or 1…5 V output signal pressure sensors.
25 bar, 350 psi Range 0-10 V, 0-5 V, 1-5 V Output Pressure Sensors
0…25 bar or 0…350 psi pressure range, 0…10 V, 0…5 V, or 1…5 V output signal pressure sensors.
16 bar, 250 psi Range 0-10 V, 0-5 V, 1-5 V Output Pressure Sensors
0…16 bar or 0…250 psi pressure range, 0…10 V, 0…5 V, or 1…5 V output signal pressure sensors.
1600 barg 4-20mA freshwater pressure sensor for hydrostatic testing
A high range gauge pressure sensor for hydrostatic pressure testing use to measure pressure of freshwater over a range of 0 to 1,600 bar g from the 9/16 UNF process connection, and sending the corresponding 4-20mA signal through the DIN plug electrical connection.
5 barg 4-20mA output pressure sensor for steam sterilization up to 150C/300F
A high temperature media protected pressure sensor for steam sterilizing use to measure pressure of steam over a range of 0 to 5 bar g from the G1/4 male process connection, and sending the corresponding 4-20mA signal through the DIN plug electrical connection.
3.5 bar, 50 psi Range 0-10 V, 0-5 V, 1-5 V Output Pressure Sensors
0…3.5 bar or 0…50 psi pressure range, 0…10 V, 0…5 V, or 1…5 V output signal pressure sensors.
2.5 bar, 35 psi Range 0-10 V, 0-5 V, 1-5 V Output Pressure Sensors
0…2.5 bar or 0…35 psi pressure range, 0…10 V, 0…5 V, or 1…5 V output signal pressure sensors.
-3 to 4 mbar dp range 4-20mA ATEX approved biogas pressure sensor for process control use on a 1bar line
A low range differential pressure sensor for process control use to measure pressure of biogas over a range of -3 to 4 mbar diff on a 1 bar biogas line from two 1/4 NPT female process connections, and sending the corresponding 4-20mA signal through the weatherproof cable electrical connection.
25 bar gauge range ratiometric 0.5 to 4.5 volts output ceramic diaphragm pressure sensor
Economical corrosion resistant ceramic diaphragm pressure sensor for measuring over a 0 to 25 bar gauge pressure range and generating a ratiometric 0.5 to 4.5 volts output signal.
350 mbar, 5 psi Range 0-10 V, 0-5 V, 1-5 V Output Pressure Sensors
0…350 mbar or 0…5 psi pressure range, 0…10 V, 0…5 V, or 1…5 V output signal pressure sensors.
250 mbar, 4 psi Range 0-10 V, 0-5 V, 1-5 V Output Pressure Sensors
0…250 mbar or 0…4 psi pressure range, 0…10 V, 0…5 V, or 1…5 V output signal pressure sensors.
150psig range wireless pressure sensing kit for leak testing use
Wireless pressure measurement kit for plumbing system leak testing use with a 150psig range plus a 1/4 NPT male fitting. Each pressure reading is transmitted wirelessly to a single channel base receiver, where it is converted to a 1-5Vdc or 4-20mA analogue output signal.
150 mbar, 2 psi Range 0-10 V, 0-5 V, 1-5 V Output Pressure Sensors
0…150 mbar or 0…2 psi pressure range, 0…10 V, 0…5 V, or 1…5 V output signal pressure sensors.
200 barg 0-10Vdc out hydraulic control pressure sensor for agricultural machinery
A robust all welded stainless steel gauge pressure sensor for agricultural automation use to measure pressure of mineral hydraulic oil over a range of 0 to 200 bar g from the 1/4 NPT male process connection, and sending the corresponding 0-10Vdc signal through the DIN plug electrical connection.
25 mbar, 10 inH2O Range 0-10 V, 0-5 V, 1-5 V Output Pressure Sensors
0…25 mbar or 0…10 inH2O pressure range, 0…10 V, 0…5 V, or 1…5 V output signal pressure sensors.
3000 psia high accuracy 0-10Vdc out pressure sensor for leak checking pressurized tanks
A high accuracy absolute high range pressure sensor for pressurized tank leak testing use to measure pressure of freshwater over a range of 0 to 3,000 psi absolute from the 1/4 NPT male process connection, and sending the corresponding 0-10Vdc signal through the waterproof cable electrical connection.
15 mbar, 6 inH2O Range 0-10 V, 0-5 V, 1-5 V Output Pressure Sensors
0…15 mbar or 0…6 inH2O pressure range, 0…10 V, 0…5 V, or 1…5 V output signal pressure sensors.
7.5 mbar, 3 inH2O Range 0-10 V, 0-5 V, 1-5 V Output Pressure Sensors
0…7.5 mbar or 0…3 inH2O pressure range, 0…10 V, 0…5 V, or 1…5 V output signal pressure sensors.
2.5 mbar, 1 inH2O Range 0-10 V, 0-5 V, 1-5 V Output Pressure Sensors
0…2.5 mbar or 0…1 inH2O pressure range, 0…10 V, 0…5 V, or 1…5 V output signal pressure sensors.
90 mbar, 36 inH2O Range 0-10 V, 0-5 V, 1-5 V Output Pressure Sensors
0…90 mbar or 0…36 inH2O pressure range, 0…10 V, 0…5 V, or 1…5 V output signal pressure sensors.
80 mbar, 32 inH2O Range 0-10 V, 0-5 V, 1-5 V Output Pressure Sensors
0…80 mbar or 0…32 inH2O pressure range, 0…10 V, 0…5 V, or 1…5 V output signal pressure sensors.
70 mbar, 28 inH2O Range 0-10 V, 0-5 V, 1-5 V Output Pressure Sensors
0…70 mbar or 0…28 inH2O pressure range, 0…10 V, 0…5 V, or 1…5 V output signal pressure sensors.
60 mbar, 24 inH2O Range 0-10 V, 0-5 V, 1-5 V Output Pressure Sensors
0…60 mbar or 0…24 inH2O pressure range, 0…10 V, 0…5 V, or 1…5 V output signal pressure sensors.
50 mbar, 20 inH2O Range 0-10 V, 0-5 V, 1-5 V Output Pressure Sensors
0…50 mbar or 0…20 inH2O pressure range, 0…10 V, 0…5 V, or 1…5 V output signal pressure sensors.
20 bar absolute low response time 4-20mA output dynamic freshwater pressure sensor for research use
A low response time absolute pressure sensor for research use to measure pressure of freshwater over a range of 0 to 20 bar abs from the G1/4 male process connection, and sending the corresponding 4-20mA signal through the M12 connector electrical connection.
40 bar absolute 0-20mA output air pressure sensor for pneumatic monitoring
An absolute pneumatic pressure monitoring sensor for compressed air use to measure pressure of air over a range of 0 to 40 bar abs from the 1/4 BSP P male process connection, and sending the corresponding 0-20mA signal through the weatherproof cable electrical connection.
40 mbar, 16 inH2O Range 0-10 V, 0-5 V, 1-5 V Output Pressure Sensors
0…40 mbar or 0…16 inH2O pressure range, 0…10 V, 0…5 V, or 1…5 V output signal pressure sensors.
30 mbar, 12 inH2O Range 0-10 V, 0-5 V, 1-5 V Output Pressure Sensors
0…30 mbar or 0…12 inH2O pressure range, 0…10 V, 0…5 V, or 1…5 V output signal pressure sensors.
20 mbar, 8 inH2O Range 0-10 V, 0-5 V, 1-5 V Output Pressure Sensors
0…20 mbar or 0…8 inH2O pressure range, 0…10 V, 0…5 V, or 1…5 V output signal pressure sensors.
600 barg 4-20mA pressure transducer for mobile crane hydraulic control use
A high gauge pressure transducer for hydraulic control use to measure pressure of mineral hydraulic oil on a mobile crane over a range of 0 to 600 bar abs from the 1/4 BSP P male process connection, and sending the corresponding 4-20mA signal through the DIN plug electrical connection.
10 mbar, 4 inH2O Range 0-10 V, 0-5 V, 1-5 V Output Pressure Sensors
0…10 mbar or 0…4 inH2O pressure range, 0…10 V, 0…5 V, or 1…5 V output signal pressure sensors.
9 mbar, 3.6 inH2O Range 0-10 V, 0-5 V, 1-5 V Output Pressure Sensors
0…9 mbar or 0…3.6 inH2O pressure range, 0…10 V, 0…5 V, or 1…5 V output signal pressure sensors.
8 mbar, 3.2 inH2O Range 0-10 V, 0-5 V, 1-5 V Output Pressure Sensors
0…8 mbar or 0…3.2 inH2O pressure range, 0…10 V, 0…5 V, or 1…5 V output signal pressure sensors.
7 mbar, 2.8 inH2O Range 0-10 V, 0-5 V, 1-5 V Output Pressure Sensors
0…7 mbar or 0…2.8 inH2O pressure range, 0…10 V, 0…5 V, or 1…5 V output signal pressure sensors.
6 mbar, 2.4 inH2O Range 0-10 V, 0-5 V, 1-5 V Output Pressure Sensors
0…6 mbar or 0…2.4 inH2O pressure range, 0…10 V, 0…5 V, or 1…5 V output signal pressure sensors.
5 mbar, 2 inH2O Range 0-10 V, 0-5 V, 1-5 V Output Pressure Sensors
0…5 mbar or 0…2 inH2O pressure range, 0…10 V, 0…5 V, or 1…5 V output signal pressure sensors.
4 mbar, 1.6 inH2O Range 0-10 V, 0-5 V, 1-5 V Output Pressure Sensors
0…4 mbar or 0…1.6 inH2O pressure range, 0…10 V, 0…5 V, or 1…5 V output signal pressure sensors.
3 mbar, 1.2 inH2O Range 0-10 V, 0-5 V, 1-5 V Output Pressure Sensors
0…3 mbar or 0…1.2 inH2O pressure range, 0…10 V, 0…5 V, or 1…5 V output signal pressure sensors.
2 mbar, 0.8 inH2O Range 0-10 V, 0-5 V, 1-5 V Output Pressure Sensors
0…2 mbar or 0…0.8 inH2O pressure range, 0…10 V, 0…5 V, or 1…5 V output signal pressure sensors.
1 mbar, 0.4 inH2O Range 0-10 V, 0-5 V, 1-5 V Output Pressure Sensors
0…1 mbar or 0…0.4 inH2O pressure range, 0…10 V, 0…5 V, or 1…5 V output signal pressure sensors.
500 psi absolute range HART enabled 4-20mA output diesel pressure sensor for pipeline leak testing use
A HART coms enabled absolute pressure sensor for pipeline leak testing use to measure pressure of diesel over a range of 0 to 500 psi abs from the 1/2 NPT male process connection, and sending the corresponding 4-20mA signal through the mil-spec connector electrical connection.
1 barg IS certified 4-20mA submersible leachate pressure sensor for tank level gauging use
An intrinsically safe submersible wastewater gauge pressure sensor for tank level gauging use to measure pressure of leachate over a range of 0 to 1 bar g from the G1/2 male process connection, and sending the corresponding 4-20mA signal through the submersible cable electrical connection.
3 psig range 4-20mA output natural gas pressure sensor for building boiler heating use
A low range gauge pressure sensor for building system boiler heating use to measure pressure of natural gas over a range of 0 to 3 psi g from the G1/4 male process connection, and sending the corresponding 4-20mA signal through the M12 connector electrical connection.
300 psi g range 0-10 volts output ceramic diaphragm pressure sensor
Economical corrosion resistant ceramic diaphragm pressure sensor for measuring over a 0 to 300 pounds per square inch gauge pressure range and generating a 0 to 10 volts output signal.
250 bar, 3500 psi, 250 kg/cm2, 25 MPa Range 4-20 mA Output Pressure Sensors
0…250 bar, 0…3500 psi, 0…250 kg/cm2, or 0…25 MPa pressure range, 4…20 mA output signal pressure sensors.
160 bar, 2500 psi, 160 kg/cm2, 16 MPa Range 4-20 mA Output Pressure Sensors
0…160 bar, 0…2500 psi, 0…160 kg/cm2, or 0…16 MPa pressure range, 4…20 mA output signal pressure sensors.
6,000 psig ATEX/IECEx IS approved 4-20mA pressure sensor for oil pumping use
An intrinsically safe all welded stainless steel gauge pressure sensor for oil pumping use to measure pressure of pumped oil over a range of 0 to 6,000 psi g from the G1/2 male process connection, and sending the corresponding 4-20mA signal through the weatherproof cable electrical connection.
35 bar, 500 psi, 35 kg/cm2, 3.5 MPa Range 4-20 mA Output Pressure Sensors
0…35 bar, 0…500 psi, 0…35 kg/cm2, or 0…3.5 MPa pressure range, 4…20 mA output signal pressure sensors.
25 bar, 350 psi, 25 kg/cm2, 2.5 MPa Range 4-20 mA Output Pressure Sensors
0…25 bar, 0…350 psi, 0…25 kg/cm2, or 0…2.5 MPa pressure range, 4…20 mA output signal pressure sensors.
16 bar, 250 psi, 16 kg/cm2, 1.6 MPa Range 4-20 mA Output Pressure Sensors
0…16 bar, 0…250 psi, 0…16 kg/cm2, or 0…1.6 MPa pressure range, 4…20 mA output signal pressure sensors.
3.5 bar, 50 psi, 3.5 kg/cm2, 350 kPa Range 4-20 mA Output Pressure Sensors
0…3.5 bar, 0…50 psi, 0…3.5 kg/cm2, or 0…350 kPa pressure range, 4…20 mA output signal pressure sensors.
2.5 bar, 35 psi, 2.5 kg/cm2, 250 kPa Range 4-20 mA Output Pressure Sensors
0…2.5 bar, 0…35 psi, 0…2.5 kg/cm2, or 0…250 kPa pressure range, 4…20 mA output signal pressure sensors.
4 barg 4-20mA output ceramic diaphragm pressure sensor with G1/4 female
Economical corrosion resistant ceramic diaphragm pressure sensor with G1/4 female process connection for measuring over a 0 to 4 bar gauge pressure range and generating a 4 to 20 milliamps output signal.
350 mbar, 5 psi, 140 inH2O, 35 kPa Range 4-20 mA Output Pressure Sensors
0…350 mbar, 0…5 psi, 0…140 inH2O, or 0…35 kPa pressure range, 4…20 mA output signal pressure sensors.
250 mbar, 4 psi, 100 inH2O, 25 kPa Range 4-20 mA Output Pressure Sensors
0…250 mbar, 0…4 psi, 0…100 inH2O, or 0…25 kPa pressure range, 4…20 mA output signal pressure sensors.
150 mbar, 2 psi, 60 inH2O, 15 kPa Range 4-20 mA Output Pressure Sensors
0…150 mbar, 0…2 psi, 0…60 inH2O, or 0…15 kPa pressure range, 4…20 mA output signal pressure sensors.
DCT143 IO-Link Interface Mobile Hydraulics OEM Short Length Pressure Sensor
All welded stainless steel IO-Link interface pressure sensor with a low profile for use by mobile hydraulics manufacturers to measure hydraulic pressures up to 600 bar or 9000 psi.
25 mbar, 10 inH2O, 2500 Pa, 6 oz/in2 Range 4-20 mA Output Pressure Sensors
0…25 mbar, 0…10 inH2O, 0…2500 Pa, or 0…6 oz/in2 pressure range, 4…20 mA output signal pressure sensors.
15 mbar, 6 inH2O, 1500 Pa, 3.5 oz/in2 Range 4-20 mA Output Pressure Sensors
0…15 mbar, 0…6 inH2O, 0…1500 Pa, or 0…3.5 oz/in2 pressure range, 4…20 mA output signal pressure sensors.
7.5 mbar, 3 inH2O, 750 Pa, 1.7 oz/in2 Range 4-20 mA Output Pressure Sensors
0…7.5 mbar, 0…3 inH2O, 0…750 Pa, or 0…1.7 oz/in2 pressure range, 4…20 mA output signal pressure sensors.
2.5 mbar, 1 inH2O, 250 Pa, 0.6 oz/in2 Range 4-20 mA Output Pressure Sensors
0…2.5 mbar, 0…1 inH2O, 0…250 Pa, or 0…0.6 oz/in2 pressure range, 4…20 mA output signal pressure sensors.
-20 to +50 psig 0-10V out compound range liquid dispensing pressure sensor
Positive and negative range pressure sensor for measuring liquid dispensing pressure over a -20 to +50 pounds per square inch gauge pressure range and generating a 0 to 10 volts output signal.
-1 to 20 bar g compound range IS 4-20mA propane pressure sensor for process control use
An intrinsically safe compound range pressure sensor for process control use to measure pressure of propane gas over a range of -1 to 20 bar g from the G1/4 male process connection, and sending the corresponding 4-20mA signal through the DIN plug electrical connection.
20 MPa g range 4-20mA output high pressure sensor and plug-on display for hydraulic control use
A high pressure sensor and plug-on display for hydraulic control use to measure pressure of mineral hydraulic oil over a range of 0 to 20 MPa g from the G1/8 male process connection, and sending the corresponding 4-20mA current loop signal through the DIN plug connector electrical connection.
-0.5 to +0.5 bar gauge 0-5 volts output compound range pressure sensor
OEM compound low range gauge pressure sensor with semiconductor strain gauges for measuring over a -0.5 to +0.5 bar gauge pressure range and generating a 0 to 5 volts output signal.
10 bar absolute I2C interface air pressure sensor
An absolute digital pressure sensor for measuring the pressure of air over a range of 0 to 10 bar absolute from the G1/4 male process connection, and sending the corresponding I2C interface through the weatherproof cable gland electrical connection.
150 psig RS485 Modbus RTU chilled water pressure sensor for supply and return monitoring
A digital interface pressure sensor for flow monitoring use to measure pressure of chilled water supply & return over a range of 0 to 150 psi g from the 1/4 NPT male process connection, and sending the corresponding RS485 Modbus RTU protocol interface through the weatherproof cable electrical connection.
90 mbar, 36 inH2O, 9000 Pa, 1.3 psi Range 4-20 mA Output Pressure Sensors
0…90 mbar, 0…36 inH2O, 0…9000 Pa, or 0…1.3 psi pressure range, 4…20 mA output signal pressure sensors.
80 mbar, 32 inH2O, 8000 Pa, 1.2 psi Range 4-20 mA Output Pressure Sensors
0…80 mbar, 0…32 inH2O, 0…8000 Pa, or 0…1.2 psi pressure range, 4…20 mA output signal pressure sensors.
70 mbar, 28 inH2O, 7000 Pa, 1 psi Range 4-20 mA Output Pressure Sensors
0…70 mbar, 0…28 inH2O, 0…7000 Pa, or 0…1 psi pressure range, 4…20 mA output signal pressure sensors.
-15psig 0-10V out negative pressure transducer and display for air extraction use
A digital display pressure transducer for air extraction use to measure negative pressure difference of air inlet over a range of 0 to -15 psi g from a 1/4 NPT male process connection, and sending the corresponding 0-10Vdc signal through the DIN plug electrical connection.
500 psig 4-20mA anhydrous ammonia pressure sensor for controlling refrigeration condenser fans and pumps
An all welded stainless steel pressure sensor for refrigeration condenser fan and pump control use to measure pressure of anhydrous ammonia (NH3) over a range of 0 to 500 psi g from the 1/4 NPT male process connection, and sending the corresponding 4-20mA signal through the DIN plug electrical connection.
60 mbar, 24 inH2O, 6000 Pa, 0.9 psi Range 4-20 mA Output Pressure Sensors
0…60 mbar, 0…24 inH2O, 0…6000 Pa, or 0…0.9 psi pressure range, 4…20 mA output signal pressure sensors.
50 mbar, 20 inH2O, 5000 Pa, 0.75 psi Range 4-20 mA Output Pressure Sensors
0…50 mbar, 0…20 inH2O, 0…5000 Pa, or 0…0.75 psi pressure range, 4…20 mA output signal pressure sensors.
40 mbar, 16 inH2O, 4000 Pa, 0.6 psi Range 4-20 mA Output Pressure Sensors
0…40 mbar, 0…16 inH2O, 0…4000 Pa, or 0…0.6 psi pressure range, 4…20 mA output signal pressure sensors.
30 mbar, 12 inH2O, 3000 Pa, 0.45 psi Range 4-20 mA Output Pressure Sensors
0…30 mbar, 0…12 inH2O, 0…3000 Pa, or 0…0.45 psi pressure range, 4…20 mA output signal pressure sensors.
20 mbar, 8 inH2O, 2000 Pa, 0.3 psi Range 4-20 mA Output Pressure Sensors
0…20 mbar, 0…8 inH2O, 0…2000 Pa, or 0…0.3 psi pressure range, 4…20 mA output signal pressure sensors.
10 mbar, 4 inH2O, 1000 Pa, 2.3 oz/in2 Range 4-20 mA Output Pressure Sensors
0…10 mbar, 0…4 inH2O, 0…1000 Pa, or 0…2.3 oz/in2 pressure range, 4…20 mA output signal pressure sensors.
9 mbar, 3.6 inH2O, 900 Pa, 2.1 oz/in2 Range 4-20 mA Output Pressure Sensors
0…9 mbar, 0…3.6 inH2O, 0…900 Pa, or 0…2.1 oz/in2 pressure range, 4…20 mA output signal pressure sensors.
8 mbar, 3.2 inH2O, 800 Pa, 1.9 oz/in2 Range 4-20 mA Output Pressure Sensors
0…8 mbar, 0…3.2 inH2O, 0…800 Pa, or 0…1.9 oz/in2 pressure range, 4…20 mA output signal pressure sensors.
7 mbar, 2.8 inH2O, 700 Pa, 1.6 oz/in2 Range 4-20 mA Output Pressure Sensors
0…7 mbar, 0…2.8 inH2O, 0…700 Pa, or 0…1.6 oz/in2 pressure range, 4…20 mA output signal pressure sensors.
6 mbar, 2.4 inH2O, 600 Pa, 1.4 oz/in2 Range 4-20 mA Output Pressure Sensors
0…6 mbar, 0…2.4 inH2O, 0…600 Pa, or 0…1.4 oz/in2 pressure range, 4…20 mA output signal pressure sensors.
5 mbar, 2 inH2O, 500 Pa, 1.2 oz/in2 Range 4-20 mA Output Pressure Sensors
0…5 mbar, 0…2 inH2O, 0…500 Pa, or 0…1.2 oz/in2 pressure range, 4…20 mA output signal pressure sensors.
4 mbar, 1.6 inH2O, 400 Pa, 0.9 oz/in2 Range 4-20 mA Output Pressure Sensors
0…4 mbar, 0…1.6 inH2O, 0…400 Pa, or 0…0.9 oz/in2 pressure range, 4…20 mA output signal pressure sensors.
3 mbar, 1.2 inH2O, 300 Pa, 0.7 oz/in2 Range 4-20 mA Output Pressure Sensors
0…3 mbar, 0…1.2 inH2O, 0…300 Pa, or 0…0.7 oz/in2 pressure range, 4…20 mA output signal pressure sensors.
2 mbar, 0.8 inH2O, 200 Pa, 0.5 oz/in2 Range 4-20 mA Output Pressure Sensors
0…2 mbar, 0…0.8 inH2O, 0…200 Pa, or 0…0.5 oz/in2 pressure range, 4…20 mA output signal pressure sensors.
1,500 psig 4-20mA out mineral hydraulic oil pressure sensor for material testing machines
A high accuracy gauge pressure sensor for hydraulic control use to measure pressure of mineral hydraulic oil on material tension and compression testing machines over a range of 0 to 1,500 psi g from the 1/4 NPT male process connection, and sending the corresponding 4-20mA signal through the field housing electrical connection.
1 mbar, 0.4 inH2O, 100 Pa, 0.25 oz/in2 Range 4-20 mA Output Pressure Sensors
0…1 mbar, 0…0.4 inH2O, 0…100 Pa, or 0…0.25 oz/in2 pressure range, 4…20 mA output signal pressure sensors.