Low range digital interface submersible liquid level probe with RS 485 Modbus RTU protocol serial bus communications for measuring level of fuel, oil and wastewater in low fill height open tanks.
Oil
Canola oil tank hygienic level sensor & indicator with high temperature protection
Instrument for measuring the level of a used Canola oil tank, and tolerate temperatures of up to 190 degrees Celsius.
1000 barg 4-20mA output synthetic oil pressure sensor for hydraulic pump controls
A high range pressure sensor for hydraulic pump use use to measure pressure of synthetic hydraulic oil over a range of 0 to 1,000 bar g from the G1/2 male process connection, and sending the corresponding 4-20mA signal through the DIN plug electrical connection to a microprocessor.
200 barg 0-10Vdc out hydraulic control pressure sensor for agricultural machinery
A robust all welded stainless steel gauge pressure sensor for agricultural automation use to measure pressure of mineral hydraulic oil over a range of 0 to 200 bar g from the 1/4 NPT male process connection, and sending the corresponding 0-10Vdc signal through the DIN plug electrical connection.
600 barg 4-20mA pressure transducer for mobile crane hydraulic control use
A high gauge pressure transducer for hydraulic control use to measure pressure of mineral hydraulic oil on a mobile crane over a range of 0 to 600 bar abs from the 1/4 BSP P male process connection, and sending the corresponding 4-20mA signal through the DIN plug electrical connection.
6,000 psig ATEX/IECEx IS approved 4-20mA pressure sensor for oil pumping use
An intrinsically safe all welded stainless steel gauge pressure sensor for oil pumping use to measure pressure of pumped oil over a range of 0 to 6,000 psi g from the G1/2 male process connection, and sending the corresponding 4-20mA signal through the weatherproof cable electrical connection.
20 MPa g range 4-20mA output high pressure sensor and plug-on display for hydraulic control use
A high pressure sensor and plug-on display for hydraulic control use to measure pressure of mineral hydraulic oil over a range of 0 to 20 MPa g from the G1/8 male process connection, and sending the corresponding 4-20mA current loop signal through the DIN plug connector electrical connection.
1,500 psig 4-20mA out mineral hydraulic oil pressure sensor for material testing machines
A high accuracy gauge pressure sensor for hydraulic control use to measure pressure of mineral hydraulic oil on material tension and compression testing machines over a range of 0 to 1,500 psi g from the 1/4 NPT male process connection, and sending the corresponding 4-20mA signal through the field housing electrical connection.
300 barg 4-20mA synthetic hydraulic oil pressure transducer for hydraulic control use
An all welded high range pressure transducer for hydraulic control use to measure pressure of synthetic hydraulic oil over a range of 0 to 300 bar g from the G1/4 male process connection, and sending the corresponding 4-20mA signal through the M12 connector electrical connection.
3000 psig RS485 ModbusRTU interface synthetic hydraulic oil pressure sensor for testing use
A digital pressure sensor for testing use to measure pressure of synthetic hydraulic oil over a range of 0 to 3,000 psi g from the 1/4 NPT male process connection, and sending the corresponding RS485 signal through the M12 connector electrical connection.
10psig 4-20mA oily wastewater pressure sensor with hi-temp protection for tank level gauging use
A low range hi-temp media 150°C/302°F protected max gauge pressure sensor for tank level gauging use to measure pressure of oily wastewater over a range of 0 to 10 psi g from the 1/4 NPT male process connection, and sending the corresponding 4-20mA signal through the weatherproof cable electrical connection.
All welded wetted parts 10000 psig 0-10Vdc out pressure sensor for hydraulic control use
A robust all welded wetted parts high range pressure sensor for hydraulic control use to measure pressure of mineral hydraulic oil over a range of 0 to 10,000 psi g from the G1/2 EN837 male process connection, and sending the corresponding 0-10Vdc signal through the M12 connector electrical connection.
10000 psig range 0-5Vdc output mineral oil high pressure sensor for hydraulic cylinder use
A high range pressure sensor for hydraulic control use to measure pressure of mineral oil in a hydraulic cylinder over a range of 0 to 10,000 psi g from the 1/2 NPT male process connection, and sending the corresponding 0-5Vdc signal through the weatherproof cable electrical connection.
3000 psig range 0-10Vdc output digital display pressure transducer for hydraulic control use
A digital display pressure transducer for hydraulic control use to measure pressure of mineral hydraulic oil over a range of 0 to 3,000 psi g from the 1/4 NPT male process connection, and sending the corresponding 0-10Vdc signal through the DIN plug electrical connection.
400 bar high range 0-10Vdc output engine oil pressure sensor with snubber for hydraulic control use
A high range absolute pressure sensor for hydraulic control use to measure pressure of engine oil over a range of 0 to 400 bar abs from the 1/4 BSP P male process connection, and sending the corresponding 0-10Vdc signal through the DIN plug electrical connection.
60000 psig range 0-10Vdc output engine oil pressure sensor for high pressure homogenization use
An all welded very high range pressure sensor for high pressure homogenization use to measure pressure of engine oil over a range of 0 to 60,000 psi g from the 9/16 UNF female (AE HP type) process connection, and sending the corresponding 0-10Vdc signal through the PTIH-10-6P military style electrical connection.
Hi-Temp 500 psig range 0-10Vdc output ATF pressure sensor for automotive component testing
A hi-temp media 150°C/302°F max gauge pressure sensor for automotive component testing use to measure pressure of ATF over a range of 0 to 500 psi g from the 1/4 NPT male process connection, and sending the corresponding 0-10Vdc signal through the mil-spec connector electrical connection.
3000 psi absolute 0-20mA output mineral oil pressure sensor for hydraulic control use
An absolute high pressure sensor for hydraulic control use to measure pressure of mineral hydraulic oil over a range of 0 to 3,000 psi absolute from the G1/4 male process connection, and sending the corresponding 0-20mA signal through the M12 connector electrical connection.
Injection moulding machine 22000 psig 4-20mA output synthetic hydraulic oil pressure sensor
A digital display and high pressure sensor for injection moulding machine use to measure pressure of synthetic hydraulic oil over a range of 0 to 22,000 psi g from the 9/16 UNF female process connection, and sending the corresponding 4-20mA signal through the M12 connector electrical connection.
Low powered digital out IP68 100mb level & temperature sensor
We are looking for an immersion gauge sensors with vented cable for measuring the level of oil.
Hot oil pressure transmitter & display to read up to 5 bar at 300degC max
Pressure transmitter with an integral LED loop powered digital display for use with hot oil up to 300 deg. C (max.) over a pressure range of 0-5 bar gauge.
Lube oil pressure sensor for use on ship engines to measure up to 10 bar
Marine approved pressure sensor for use on lube oil up to 10 bar with a maximum media temperature of 120°C and environment temperature from 0 to 70°C.
Marine certified oil pressure sensor with 2.5 bar g range
Marine approved version pressure sensor for use on Diesel up to 2.5 bar at a maximum media temperature of 120°C and environment temperature of 70°C.
Low cost diesel engine test pressure transducers
Cost effective pressure transducers to connect to data logger for diesel engine testing.
Hydrostatic level sensor and indicator for frothing oil tank
Hydrostatic principle level sensor and indicator for overcoming frothing problem on the surface of a rolling oil liquid inside a storage tank.
2m tank height, high temperature oil level sensor with 4-20mA out
Tank level sensor to measure tank height of hot oil up to 2 meters at a maximum temperature of 200 degC.
10 metre high cylindrical oil tank level gauge and transmitter
Sensor and display for converting a pressure reading to a level reading of a 10 metre high cylindrical oil tank.
6 bar g marine approved (DNV/GL) oil pressure transmitter
DNV and GL marine certified 4 to 20 milliamp output pressure transmitter for measuring 0 to 6 bar pressure on lubrication oil pumps.
200 bar gradient pressure sensor with RS232 for use on oil
Wet wet digital differential pressure sensor with RS232 communications interface for measuring gradient pressure (pressure in – pressure out) of an oil pump up to 200 bar (3000 psi).