Compact robust all welded stainless steel pressure sensor for heavy duty hydraulic system applications.
OEM (Original Equipment Manufacturers) related product information and specifying tips for measurement instrumentation intended for use inside other instrumentation products. OEM products are easily adapted to different instrumentation designs and are geared towards low cost high quantity production projects.
The IC-LTM is a customisable fluid flow meter which can be adapted to a oem liquid flow application with an extensive choice of mechanical process fittings, electrical connections, displays and output signals to measure flow speed or flow rate and use as a totaliser.
Low cost OEM diesel fuel or water level sensor for installing inside or outside a storage tank.
All welded stainless steel IO-Link interface pressure sensor with a low profile for use by mobile hydraulics manufacturers to measure hydraulic pressures up to 600 bar or 9000 psi.
A salt water pressure sensor for flow monitoring use to measure pressure of saltwater from a jockey fire fighting pump over a range of 0 to 30 bar g from the 1/4 NPT male process connection, and sending the corresponding 1-5Vdc signal through the DIN plug electrical connection.
High temperature protected OEM stainless steel diaphragm pressure sensor with semiconductor strain gauges for measuring over a 0 to 800 mbar absolute pressure range and generating a 4 to 20 milliamps output signal.
Low compound range OEM pressure sensor with semiconductor strain gauges for measuring over a -5 to +5 psi gauge pressure range and generating a 4 to 20 milliamps output signal.
Economical OEM high range pressure sensor for measuring over a 0-10000 psi gauge pressure range and generating a 4 to 20 milliamps output signal.
A compact size compound range pressure sensor for oem use to measure pressure of air over a range of -20 to 20 inH2O g from the 1/8 BSP P male process connection, and sending the corresponding 0-10Vdc signal through the M12 connector electrical connection.
OEM corrosion resistant ceramic diaphragm pressure sensor for measuring over a 5000 psi gauge pressure range and generating a ratiometric 0.5 to 4.5 volts output signal.
An absolute pressure sensor for power generation oem use to measure pressure of engine oil over a range of 0 to 75 bar abs from the G1/4 male process connection, and sending the corresponding RS485 signal through the M12 connector electrical connection.
4-20mA output low cost pressure transmitter for incorporating into oem equipment to measure over the atmospheric pressure range.
Pressure sensor elements with sensing diaphragms made from alumina ceramic (Al2O3) for electronic & mechanical oem integration into measurement & control instrumentation designs.
The Gefran KHC Series is a compact pressure sensor with a CANopen digital interface for use with vehicle digital networks. The KHC CANopen DS404 coms protocol pressure sensor is available in pressure ranges from 0-1 bar up to 0-1000 bar gauge.
The Gefran KS Series is a small size oil free all stainless steel pressure sensor with SIL2 certification for incorporating into the design of industrial automation machinery. The KS compact SIL2 approved pressure sensor is available in ranges from 0-1 bar up to 0-1000 bar gauge
The Gefran KH mobile hydraulics pressure sensor is a low cost compact stainless steel high pressure sensor for use in large quantity OEM applications on mobile vehicles. The KX is available in ranges from 4 bar / 60 psi up to 1000 bar / 15000 psi.
Pressure transducer for measuring refrigerant head pressure control with a 0-10 volts dc output with a pressure range of 0-225 psi.
All welded voltage output pressure transducer for use on R134A refrigerant coolant gas used in automotive air conditioning systems.
Transducers for incorporating into OEM design instrumentation products to monitor or control.
I need a low cost 10 bar pressure sensor which will accept 5 Vdc power supply, output signal from 0,5 to 4.5 volt, and a pressure range of 0-10 bar
Water resistant pressure sensor for measuring hydrostatic pressures in the range of 0-0.5 mWC up to 0-100 mWC.
The stripped down OEM version of the IMP transducer is specifically designed for use inside freshwater pressure loggers
Stainless steel 316L waterproof probe for measuring both water temperature and depth and generating two separate 4-20mA current loop measurement signals.
Economical IP68 protected sensor with stainless steel 316L housing and Ceramic strain gauge sensing diaphragm for measuring liquid depth pressure.
IP68 protect pressure sensor for monitoring potable water level to depths of 100 metres.
Versatile low price pressure sensor with a wide selection of electrical and mechanical options for customisation.
Low cost sensor for measuring small pressure ranges from 0-50 mbar (10 inH2O) to 0-1000 mbar (15 psi) of liquids or gases.
The IMTG is specifically designed for large quantity OEM customers which manufacture and install content management systems for fuel storage tanks.
I need to measure the difference in depth upstream and downstream of a freshwater weir with a maximum depth of 5 meters. Please suggest a low cost sensor with a low resolution output which can be used on many sites. The IMTG is a low cost hydrostatic pressure sensor which has been designed specifically for […]
All welded OEM pressure transmitter for use on refrigeration application with R22 and R410A refrigerant up to 400 psig.
Vacuum pressure transmitter for vacuum conveying systems to measure 0 to -500 mbar vacuum.
The IMP industrial pressure sensor, has a piezo‐resisitive ceramic pressure sensor giving it excellent media compatibility
OEM voltage output pressure transducer for use on refrigerant coolant up to a pressure of 40 bar in an automotive environment.
Cost effective submersible transducer with a 4-20mA transmitter to output into a PLC analog module on a fresh water system for tank level control up to 3 metres (10 foot).
Low range pressure transmitter for OEM equipment manufacturers. This IMP LR sensor has a 0 to 40 inH2O gauge for use on liquids or gases.
0 to 5 volt output budget pressure transducer for monitoring low range pressures
IMTG is a low cost OEM submersible level transmitter which is typically used in applications that require diesel fuel level measurement in small tanks.
We are looking to integrate a pressure sensor into the bottom of a Sonde. The sensor will be used to monitor the water depth in a borehole up to a maximum of 300m.
The IMTG is a submersible sensor that is specifically designed for diesel tank level measurement.
IP68 combined liquid level and temperature, dual 4 to 20 milliamp output pressure sensor with a 316L or Marine Bronze housing.
Economical pressure transducer for monitoring fluid level inside a tank where there is no external mounting point at the bottom of the tank.
Analogue output sensor for immersing in seawater to determine depth or change in water level by measuring hydrostatic pressure.
Low cost ceramic diaphragm pressure transmitter available on a short lead time. Pressure ranges starting from 1000 mbar up to 0-700 bar gauge or absolute.
Ceramic strain gauge pressure transducer with a 2mV/V or 10mV/V output signal in pressure ranges from 1 bar up to 700 bar gauge or absolute.