Choose the required air pressure value between 0.1 and 100 millimetres of water and read off the matching pressure in pascals.
Choose a vacuum pressure in millimeters of mercury column from 0.1 to 1,000 mmHg to cross reference the converted pressure in millimeters of water column.
We are looking for a level sensor for measuring from 0 to 100mm of water height, in an ebb and flow horticulture hydroponic system used in greenhouses and indoor farms.
A brewery grade externally mounted liquid level sensor for measuring the height of beer over a range of 0 to 2,000mm from the triclamp process connection, and sending the corresponding 0-5Vdc signal through the CIP cleaning proof cable electrical connection.
Level sensor for high temperature liquids up to 125°C, ATEX approved intrinsically safe 4-20mA output and a low range to measure 0 to 300 millimetres.
A low range externally mounted liquid level sensor for measuring the height of diesel over a range of 0 to 4000 mm from the 1/4 NPT male process connection, and sending the corresponding 0-5Vdc signal through the DIN plug electrical connection.
Digital pressure gauge for testing gauges used in diesel measurement applications, capable of measuring 0-6000 mmH2O g pressure to 0.1% accuracy and connected using a G1/2 male fitting. Also includes a UKAS cal cert.
Economical stainless steel diaphragm pressure sensor with semiconductor strain gauges for measuring vacuum over a negative 500 to 0 mmH2O gauge pressure range and generating a 4 to 20 milliamps output signal.
The DMD331 uses silicon technology which is very small compared to other sensing technologies which would have a more limited response time.
Compound vacuum and pressure transmitter with HART compliant 4-20mA analog output and insertion type, bottom mounted, 1/2 NPT male process connection
19mm diameter bore hole submersible water sensor designed to measure 0-10000 mmH2O raw water level with a 4-20mA output.
Differential pressure transmitters for instant monitoring of the air flow going through the painting booth interior
Differential pressure transmitter for measuring fan plenum chamber air pressure with a 0 to 100 mm of water column range , 4 to 20 milliamp output signal, and tube fittings suitable for ø 6 millimetre diameter flexible tubing. This differential pressure transmitter will measure the difference between the plenum chamber and the inlet/outlet, or the relative […]
Low range dp transmitter for measuring 0… -10mmWC to maintain constant negative pressure across an induced draft fan fitted with a variable frequency drive.
Choose a vacuum pressure in millimeters of water gauge from 1 to 10,000 mmWG to cross reference the converted pressure in millimeters of mercury.
Choose the required air pressure value between 1 and 1,000 pascals and read off the matching pressure in millimetres of water.
Vacuum sensor to measure negative gauge pressure from 0 to minus 100 millimeters of water gauge (mmWG) .
Vacuum transmitter for measuring 0 to minus 300 mmWC with a 4-20mA output signal suitable for connecting to a loop power supply of 24Vdc.
We are looking to measure liquid level to an accuracy of 1mm over a range of around 125mm.