This tool will allow you to enter a singular weight measured in any units, and convert it to the equivalent weight in stones and pounds (lb oz).

# Measurement Units

## Stones and Pounds (st lb) to Single Unit Weight Converter

This tool will allow you to enter a weight measured in stone (st) and pound (lb) divisions and convert it to the an equivalent singular weight in other units.

## Single Unit Weight to Pounds and Ounces (lb oz) Converter

This tool will allow you to enter a weight measured in grams (g), kilograms (kg), stones (st) plus many other units, and convert it to the equivalent weight in pounds and ounces (lb oz).

## Weight Converter

This conversion tool will convert a measurement of weight from one unit to another. Use this tool to convert grams, ounces, pounds, kilograms, stones and tons.

## Pounds and Ounces (lb oz) to Single Unit Weight Converter

This tool will allow you to enter a weight measured in pound (lb) and ounce (oz) divisions and convert it to the equivalent weight in grams (g), kilograms (kg), stones (st) and many other units.

## Single Unit Height to Feet and Inches (ft in, ′ ″) Converter

This tool will allow you to enter a height measured in millimetres (mm), centimetres (cm), yards (yd), metres (m) plus many other units, and convert it to the equivalent height in feet (ft, ′) and inches (in, ″).

## Single Unit Width to Feet and Inches (ft in, ′ ″) Converter

This tool will allow you to enter a width measured in millimetres (mm), centimetres (cm), yards (yd), metres (m) plus many other units, and convert it to the equivalent width in feet (ft, ′) and inches (in, ″).

## Single Unit Length to Feet and Inches (ft in, ′ ″) Converter

This tool will allow you to enter a length measured in millimetres (mm), centimetres (cm), yards (yd), metres (m) plus many other units, and convert it to the equivalent length in feet (ft, ′) and inches (in, ″).

## Feet and Inches (ft in, ′ ″) to Single Unit Width Converter

This tool will allow you to enter a width measured in foot (ft, ′) and inch (in, ″) divisions and convert it to the equivalent width in millimetres (mm), centimetres (cm), yards (yd), metres (m) and many other units.

## Feet and Inches (ft in, ′ ″) to Single Unit Height Converter

This tool will allow you to enter a height measured in foot (ft, ′) and inch (in, ″) divisions and convert it to the equivalent height in millimetres (mm), centimetres (cm), yards (yd), metres (m) and many other units.

## Feet and Inches (ft in, ′ ″) to Single Unit Length Converter

This tool will allow you to enter a length measured in foot (ft, ′) and inch (in, ″) divisions and convert it to the equivalent length in millimetres (mm), centimetres (cm), yards (yd), metres (m) and many other units.

## Energy Converter

This force units conversion tool allows you to convert any force to the equivalent force in other measurement units.

## Tank Height – Tank Contents Level Depth to Tank Contents Level Height Calculator

This tool will calculate the height of contents in a tank by subtracting the depth to tank contents from the well height you enter, and convert any combination of units for each depth and height value.

## Tank Height – Tank Contents Level Height to Tank Content Level Depth Calculator

This tool will calculate the depth to tank contents level by subtracting the height of the tank contents level from the tank height you enter and convert any combination of units for each depth height value.

## Well Depth – Water Level Depth to Water Level Height Calculator

This tool will calculate the depth to water by subtracting the height of the water level from the well depth reading you enter and convert any combination of depth units for each depth and height value.

## Well Depth – Water Level Height to Water Level Depth Calculator

This tool will calculate the depth to water by subtracting the height of the water level from the well depth you enter and convert any combination of depth units for each depth and height value.

## Area to Length or Width Calculator

This online tool will calculate the length or width of a rectangular shaped surface from the area, and one other known dimension of length.

## Volume to Length, Width or Height Calculator

This online tool will calculate the length, width or height of a rectangular shaped box from the volume, and two other known dimensions of length.

## Area Density Converter

This conversion tool will convert the linear mass density or mass per unit length of an item from one set of measurement units to another and display a related conversion scale for each individual conversion selected.

## Linear Mass Density Converter

This conversion tool will convert the linear mass density or mass per unit length of an item from one set of measurement units to another and display a related conversion scale for each individual conversion selected.

## Mass and Length x Width to Area Density Calculator

This calculator is used to determine the area density from the total measured mass and area of an item.

## Length x Width and Area Density to Total Mass Calculator

This calculator is used to determine the total mass of an item from the measured length and width with a specified area density

## Mass and Area Total to Area Density Calculator

This calculator is used to determine the area density from the total measured mass and area of an item.

## Mass Total and Area Density to Total Area Calculator

This calculator is used to determine the total area of an item from the total mass measured with a specified area density.

## Area Total and Area Density to Total Mass Calculator

This calculator is used to determine the total mass of an item from the total area measured with a specified area density.

## Mass and Length Total to Linear Density Calculator

This calculator is used to determine the linear mass density from the total measured mass and length of an item.

## Mass Total and Linear Density to Total Length Calculator

This calculator is used to determine the total length of an item from the total mass measured with a specified linear mass density.

## Length Total and Linear Density to Total Mass Calculator

This calculator is used to determine the total mass of an item from the total length measured with a specified linear mass density.

## Weight total and Amount per unit weight to Amount total Calculator

This total weight and amount per unit of mass to total amount calculator can be used to calculate any quantity total from the total weight in one type of mass measurement unit, and the unit mass quantity in another type.

## Time total and Amount per unit time to Amount total Calculator

This total time and amount per unit of time to total amount calculator can be used to calculate any quantity total from the total time in one type of time measurement unit, and the unit time quantity in another type.

## Length total and Amount per unit length to Amount total Calculator

This total length and amount per unit of length to total amount calculator can be used to calculate any quantity total from the total length in one type of length measurement unit, and the unit length quantity in another type.

## Volume total and Amount per unit volume to Amount total Calculator

This total volume and amount per unit of volume to total amount calculator can be used to calculate any quantity total from the total volume in one type of volumetric measurement unit, and the unit volume quantity in another type.

## Length x Width and Amount per unit area to Amount total Calculator

This length, width and amount per unit of area to total amount calculator can be used to calculate any quantity total, from the length & width in different units of a rectangular area, and the unit area quantity in any area measurement units.

## Area total and Amount per unit area to Amount total Calculator

This total area and amount per unit of area to total amount calculator can be used to calculate any quantity total, from the total area in one type of area measurement unit and the unit area quantity in another type.

## Gross – Net to Tare Weight Calculator

This tool will calculate the tare weight (TW) by subtracting the net weight (NW) from the gross weight (GW) reading you entered and convert any combination of weight (mass) units for each weight value.

## Net + Tare to Gross Weight Calculator

This tool will calculate the gross weight (GW) by adding the net weight (NW) to the tare weight (TW) reading you entered and convert any combination of weight (mass) units for each weight value.

## Gross – Tare to Net Weight Calculator

This tool will calculate the net weight (NW) by subtracting the tare weight (TW) from the gross weight (GW) reading you entered and convert any combination of weight (mass) units for each weight value.

## Suction Pressure to Vacuum Calculator

This tool will calculate the absolute referenced vacuum pressure by subtracting the suction from the barometric pressure reading you entered and convert any combination of pressure units for each pressure value.

## Vacuum to Suction Pressure Calculator

This tool will calculate the suction pressure by subtracting the vacuum pressure reading from the barometric pressure reading you entered and convert any combination of pressure units for each pressure value.

## Absolute – Barometric to Gauge Pressure Calculator

This tool will calculate the gauge pressure by subtracting the barometric pressure from the absolute referenced pressure reading you entered and convert any combination of pressure units for each pressure value.

## Gauge + Barometric to Absolute Pressure Calculator

This tool will calculate the absolute pressure by adding together the gauge pressure and related barometric pressure reading you entered and convert any combination of pressure units for each pressure value.

## High and Low Side Pressure to Differential Pressure Calculator

This tool will calculate the differential pressure from a high and low side pressure reading and convert any combination of pressure units for each pressure value.

## Pressure Transducer 0.5-4.5V Voltage Output Calculator

This pressure transducer 0.5 to 4.5 volts amplified output calculator provides a way to determine the output reading from the applied pressure and pressure transducer range.

## Pressure Transducer 1-5V Voltage Output Calculator

This pressure transducer 1 to 5 volts amplified output calculator provides a way to determine the output reading from the applied pressure and pressure transducer range.

## Pressure Transducer 0-5V Voltage Output Calculator

This pressure transducer 0 to 5 volts amplified output calculator provides a way to determine the output reading from the applied pressure and pressure transducer range.

## Pressure Transducer 0-10V Voltage Output Calculator

This pressure transducer 0 to 10 volts amplified output calculator provides a way to determine the output reading from the applied pressure and pressure transducer range.

## Ratiometric V/V Signal to Measurement Converter

This ratiometric voltage input to measurement output converter provides a way to determine the measurement output reading and voltage input range from a ratiometric voltage input signal with a specified volts per volt span sensitivity, zero offset and supply voltage.

## Measurement to Ratiometric V/V Signal Converter

This measurement to ratiometric voltage output calculator provides a way to determine the output reading and range of a ratiometric voltage signal sensing device from any measurement input, volts per volt span sensitivity, zero offset and supply voltage.

## Torr to psi Conversion Table

Scroll down to a pressure from 1 to 1,000 Torr to see the matching reading in psi units.

## psf to psi Conversion Table

Look up a value in pounds per square foot from 1 to 3,000 to obtain the converted value in pounds force per square inch units.

## oz/in² to psi Conversion Table

Look up a value in ounces force per square inch from 1 to 2000 to obtain the converted value in pounds per square inch units.

## N/mm² to psi Conversion Table

Pick out the vacuum or atmosphere pressure value you require from 1 to 1,000 newtons per square millimetre to determine the converted value in lbs/sq in units.

## N/m² to psi Conversion Table

Pick out the vacuum or atmosphere pressure value you require from 1 to 200,000 newtons per square metre to determine the converted value in lbs/sq in units.

## mmHg to psi Conversion Table

Scroll down to a pressure from 1 to 1,000 millimetres of mercury column to see the matching reading in psi units.

## inHg to psi Conversion Table

Scroll down to a pressure from 0.01 to 40.00 inches of mercury column to see the matching reading in psi units.

## g/cm² to psi Conversion Table

Look up a pressure value from 1 to 2000 grams/sq cm to find the equivalent value in pounds/sq in.

## dyn/cm² to psi Conversion Table

Look up a pressure value in dynes per square centimetre from 1,000 to 2,000,000 to obtain the converted value in pounds per square inch units.

## psi to Torr Conversion Table

Select a pressure in 0.01psi increment from 0.01 to 20.00 pounds force per square inch to see the matching pressure measured in torr units.

## psi to psf Conversion Table

Look up a value in pounds per square inch from 0.01 to 20.00 to obtain the converted value in pounds force per square foot units.

## psi to oz/in² Conversion Table

Look up a value in pounds per square inch from 0.1 to 100.0 to obtain the converted value in ounces force per square inch units.

## psi to N/mm² Conversion Table

Pick out the high range pressure value you require from 100 to 100,000 lbs/sq in to determine the converted value in newtons per square millimetre units.

## psi to N/m² Conversion Table

Pick out the vacuum or atmosphere pressure value you require from 0.01 to 20 lbs/sq in to determine the converted value in newtons per square metre units.

## psi to g/cm² Conversion Table

Look up a value in pounds per square inch from 0.01 to 20.00 to obtain the converted value in grams per square centimetre.

## psi to dyn/cm² Conversion Table

Look up a value in pounds per square inch from 0.01 to 20.00 to obtain the converted value in dynes per square centimetre.

## Torr to bar Conversion Table

Pinpoint the pressure in torr pressure units from 1 to 1,000 to determine the value in bar units.

## Pa to bar Conversion Table

Scroll down the Pa column and pick a pressure value between 100 and 200,000 pascals to view the equivalent value in bar.

## N/mm2 to bar Conversion Table

Use this look-up table to convert any value between 1 to 1,000 newtons per square millimetre into bar.

## N/m2 to bar Conversion Table

Use this look-up table to convert any value between 100 to 200,000 newtons per square metre into bar.

## MPa to bar Conversion Table

Scroll down the MPa column and pick a pressure value between 1 and 1,000 megapascals to view the equivalent value in bar.

## mmHg to bar Conversion Table

Pinpoint the pressure in millimetres of mercury column pressure units from 1 to 1,000 to determine the value in bar units.

## mbar to bar Conversion Table

Pinpoint the pressure in millibar pressure units from 1 to 2,000 to determine the value in bar.

## ksi (kilopounds per square inch) to bar Conversion Table

Use this list to convert from 1 to 1000 kilopound per square inch into bar pressure units.

## kPa to bar Conversion Table

Scroll down the kPa column and pick a pressure value between 0.1 and 1,000 kilopascals to view the equivalent value in bar.

## inHg to bar Conversion Table

Find a value from 0.01 to 40 inches of mercury column to determine the equivalent value in bar pressure units.

## bar to inHg Conversion Table

Choose a value from 1 to 2.000 bar to determine the converted value in inches of mercury column pressure units.

## inH2O to bar Conversion Table

Find a value from 1 to 1000 inches of water column to determine the equivalent value in bar pressure units.

## hPa to bar Conversion Table

Pinpoint the pressure in hectopascal pressure units from 1 to 2,000 to determine the value in bar.

## ftH2O to bar Conversion Table

Scroll down to the required water column height between 1 and 40,000 feet of water to find the matching hydrostatic water pressure in bar.

## bar to Torr Conversion Table

Pinpoint the pressure in bar pressure units from 0.001 to 2 to determine the value in Torr pressure units.

## bar to N/mm2 Conversion Table

Use this look-up table to convert any value between 0.001 to 2 bar into Newtons per square millimetre.

## bar to mmHg Conversion Table

Pinpoint the pressure in bar pressure units from 0.001 to 2 to determine the value in millimetres of mercury column.

## bar to N/m² Conversion Table

Use this look-up table to convert any value between 0.001 to 2 bar into Newtons per square metre.

## bar to mbar Conversion Table

Pinpoint the pressure in bar pressure units from 0.001 to 2 to determine the value in millibars.

## bar to hPa Conversion Table

Pinpoint the pressure in bar pressure units from 0.001 to 2 to determine the value in hectopascals.

## mH2O to psi Conversion Table

Scroll down to a pressure from 0.1 to 10,000 meters of water column to see the matching reading in psi units.

## inH2O to psi Conversion Table

Scroll down to a pressure from 1 to 1000 inches of water column to see the matching reading in psi units.

## hPa to psi Conversion Table

Choose the value you want to convert from 1 to 2000 hectopascals to obtain the equivalent value in pounds per square inch.

## mmHg to Pa (pascals) Conversion Table

Look-up below any value from 1 to 1000 millimetres of mercury to read off the equivalent value in pascals.

## mmH2O to Pa (pascals) Conversion Table

Choose the required air pressure value between 0.1 and 100 millimetres of water and read off the matching pressure in pascals.

## mmHg to mmH2O Conversion Table

Choose a vacuum pressure in millimeters of mercury column from 0.1 to 1,000 mmHg to cross reference the converted pressure in millimeters of water column.

## kPa to mbar Conversion Table

Scroll down the kPa column and pick a pressure value between 0.2 and 200 kilopascals to view the equivalent value in millibars.

## mH2O to kPa Conversion Table

Look up a metre of water column value from 0.1 to 100 to find the converted in value in kilopascal units.

## mmHg to inHg Conversion Table

Choose readings from 0 to 1000 millimetres of mercury column to convert them into inches of mercury column.

## mH2O to bar Conversion Table

Scroll down to the required water column height between 0.1 and 10,000 metres of water to find the matching hydrostatic water pressure in bar.

## N/mm² to kg/cm² Conversion Table

Look up a pressure reading from 1 to 1000 newtons per sq mm to determine the equivalent value in kg per sq cm.

## Ratiometric mV/V Signal to Measurement Converter

This ratiometric millivolt input to measurement output converter provides a way to determine the measurement output reading and millivolt input range from a ratiometric millivolt input signal with a specified millivolts per volt span sensitivity, zero offset and supply voltage.

## Measurement to Ratiometric mV/V Signal Converter

This measurement to ratiometric millivolt output calculator provides a way to determine the output reading and range of a ratiometric millivolt signal sensing device from any measurement input, millivolts per volt span sensitivity, zero offset and supply voltage.

## 0-20mA Signal to Measurement Reading Converter

This current to measurement conversion tool will convert an electrical signal within the range of 0 to 20 milliamps to the ideal reading of any linear measurement type and create an incremental milliamp conversion scale for each measurement range entered.

## 0-10V Signal to Measurement Reading Converter

This voltage signal to measurement conversion tool will convert an electrical signal within the range of 0 to 10 volts to the ideal reading of any linear measurement type and create an incremental volts conversion scale for each measurement range entered.

## 0-5V Signal to Measurement Reading Converter

This voltage signal to measurement conversion tool will convert an electrical signal within the range of 0 to 5 volts to the ideal reading of any linear measurement type and create an incremental volts conversion scale for each measurement range entered.