Device for level sensing in a wash water tank used for the dairy industry, which has a short term working temperature rating up to 100 deg Celsius.
LMK382
Ebb & Flow (Flood & Drain) Horticulture Hydroponic System 100mm Water Level Sensor
We are looking for a level sensor for measuring from 0 to 100mm of water height, in an ebb and flow horticulture hydroponic system used in greenhouses and indoor farms.
High temperature de-ionised water bath 300mm ATEX level sensor
Level sensor for high temperature liquids up to 125°C, ATEX approved intrinsically safe 4-20mA output and a low range to measure 0 to 300 millimetres.
16 inch range 4-20mA output submersible shallow water tank level sensor
A low range submersible liquid level sensor for submerging in a shallow water tank and measuring the depth over a range of 0 to 16in from the flush open face diaphragm, and sending the corresponding 4-20mA signal through the submersible cable electrical connection.
2ft range 0-10Vdc output submersible freshwater tank level sensor
A low range submersible liquid level sensor for submerging in a freshwater tank and measuring the depth over a range of 0 to 2ft from the flush diaphragm, and sending the corresponding 0-10Vdc signal through the submersible cable electrical connection.
3m range 4-20mA output submersible hot water tank level sensor
A hi-temp media 125°C/257°F max submersible water level sensor for submerging in a hot water tank and measuring the depth over a range of 0 to 3m from the nose cone, and sending the corresponding 4-20mA signal through the submersible cable electrical connection.
12 inch range 4-20mA output submersible freshwater tank level sensor
A very low range submersible liquid level sensor for submerging in a freshwater tank and measuring the depth over a range of 0 to 12in from the nose cone, and sending the corresponding 4-20mA signal through the submersible cable electrical connection.
Wastewater holding tank submersible 8 feet deep level monitoring pressure transmitter
Submersible pressure transmitter with a flush diaphragm & intrinsic safety approval for measuring the level of wastewater in a holding tank which is 8 feet high.
Cement plant process water basin level sensor
Measure the level of a fresh water basin used for storing industrial process water in a cement plant.
Geothermal pool high temperature submersible level transmitter
The LMK382 has a operating temperature range of -25…+125°C / -13…+257°F making it suitable for immersing in high temperature liquid product by hot springs.
Cooling tower basin water level transmitter
This low range submersible water level sensor is used to monitor the depth of water collected at the bottom of a cooling tower.
External corrosive chemical liquid level sensor for installing in a surrounding water bath
Is there a sensor that is suitable for measuring the level of a corrosive liquid up to about a foot in height, which is held in a vessel that is surrounded by a water bath?
Water level transmitter for monitoring sump pit water depth
Low range water depth sensor with a 4-20mA output, for connecting to a PLC to control a sump pump and submerging into a pit to monitor the level
Immersible sewage level transmitter for pressures up to 15 psi
Pressure sensor that can be used can be immersed in sewage to measure level up to 15 psi gauge.
Immersible sewage level transmitter for pressures up to 5 psi
Pressure sensor that can be used can be immersed in sewage to measure level up to 5 psi gauge.
Hydrostatic level sensor and indicator for frothing oil tank
Hydrostatic principle level sensor and indicator for overcoming frothing problem on the surface of a rolling oil liquid inside a storage tank.
1 metre deep raw sewage ATEX approved submersible level transmitter
Submersible flush diaphragm raw sewage level transmitter for measuring levels of wastewater up to 1 metre in depth.
Hi-temp level & temperature sensor for 50% NaOH solution
Submersible sensor for measuring both level and temperature of 50% Sodium Hydroxide (NaOH) solution.
20 foot deep detention water tank level sensor with 4 to 20 mA output
Low range waste water level transmitter to monitor level in detention tank.
Level transmitter for waste water tank 10 feet deep
I am looking for a liquid level measurement device for use with wastewater effluent to depth of 10 feet.
Protecting low range river level sensor from storm surges
I’m looking to monitor the depth of water in a river up to around 1 metre deep, but occasionally there is a storm and the river swells to a depth of 10 metres.
Genset hydrostatic sensor for measuring level of small diesel tank up to 12 inches
Hydrostatic type sensor for submerging inside Genset fuel tanks to measure the level of diesel
Measuring 125 mm of water level range to 1mm accuracy
We are looking to measure liquid level to an accuracy of 1mm over a range of around 125mm.
LMK382 Low Range IP68 Waste Water Level Transmitter
Submersible Low Range waste water level transmitter with intrinsically safe option for monitoring the level of sewage and effluent in water treatment plants.