High pressure transmitter for measuring up to 400 kg/cm² absolute with a current lop output of 4 to 20 milliamps.
Intrinsically Safe
Intrinsically safe instrumentation is used in hazardous areas to prevent ignition of flammable gases that could be present in the environment surrounding the installation under certain conditions.
5000 psi USB interface pressure gauge with 1/4 NPT male fitting
Digital pressure gauge with USB connection for plotting live readings up to 5000 psi on a PC.
100 mbar handheld manometer for use in hazardous areas
Measure air pressures from 0 to 100 mbar with this intrinsically safe handheld digital manometer.
50 millibar hazardous area air pressure sensor with 4-20mA out and 1/2 NPT male fitting
4-20mA output pressure transmitter for measuring air pressures up to 50 mbar gauge in intrinsically safe areas requiring the use of ATEX approved equipment.
1000 mbar vacuum transmitter for use with waste toner dust
Intrinsically safe atex approved vacuum pressure sensing device with a 4-20 milliamp output for mounting in a vacuum header line for carrying waste print toner ink dust.
1/2 NPT pressure transmitter with ATEX certification and 2 bar g pressure range
Half inch NPT male tapered thread pressure transmitter for use in an ATEX approved intrinsically safe area for measuring pressures from 0 to 2 bar gauge.
Minus 25 mb vacuum intrinsically safe 4-20mA pressure sensor
Current output pressure sensor for use in hazardous areas with a vacuum measuring range from 0 to negative 25 millibar gauge.
30 mbar Intrinsically safe gas pressure data logger
Low pressure data logger with battery power, internal data storage memory & intrinsic safety approval for measuring gas pressures up to 30mb gauge.
G1/2 flush 60 psig pressure transmitter for thick liquids in Ex zones
Screw-in G1/2 threaded flush diaphragm pressure transmitter with a 0 to 60 psi gauge range
6000 psi recording digital pressure gauge with intrinsic safety
Precision digital pressure gauge equipped with recording capability for monitoring high pressures up to 6000 psi in an explosion risk environment such as an offshore platform.
100 bar Ex ia 4 to 20mA pressure sensor for 0 to 100 degC media temperature
4 to 20mA output Ex ia intrinsically safe pressure sensor with working range of 0 to 100 bar g for use on gas or fluid in the range of 0 to 100°C, accurate to 0.5% of full range.
Ex pressure gauge and logger for recording up to 300 lbs/sq in
Ex hazardous area battery powered digital pressure gauge with a 1/4 BSP male process connection which can record pressures up to 300 lbs/sq in
Hygienic atex approved 100mbar pressure transmitter for pharmaceutical application
Hygienic ATEX approved pressure transmitter for zone 2 to read pressures from 15 to 25mbar.
Datalogging pressure gauge to use in hazardous zone 1 to measure 0 to 400 psig
We would like the instruments to be able to record / store pressures for subsequent retrieval with a handheld or laptop computer via the USB port.
Ex logger for recording pressure up to 300 bar & temperature up to 40degC
I am looking to source a digital Ex data logger with the capacity to measure temperature from 0-40 degC and pressure from 0-200 barg
Considerations for monitoring Landfill Water Level
In recent years regulations for environmental control, health and safety issues have become much more stringent for existing and new landfill sites. The regulations encompass many considerations and some involve the measurement and control of water level in many positions around a waste disposal site. One application is ensuring contaminated water is contained within a […]
DM01 Multi-Range High Accuracy Pressure Gauge
High precision digital pressure gauge with 0.05% full scale accuracy, exchangeable pressure range modules from 100 mbar (1.5 psi) up to 400 bar (6000 psi).
DS201P High Range Flush Pressure Gauge, Switch and Sensor
High pressure sensor, electronic switch and digital gauge with an all welded stainless steel flush diaphragm for high viscosity liquids.
DS200P Sanitary Low Range Pressure Gauge, Switch and Sensor
All in one electronic switch, gauge and sensor designed specifically for use in the food, drink and biomedical industry for measuring process pressures.
XMPi Process Plant Gauge and Absolute Pressure Transmitter
Process transmitter for measuring vacuum, steam, food, pharmaceutical, oil, gas and other pressure readings necessary for the monitoring and control of bulk production processes.
XMD Process Plant DP Cell Differential Pressure Transmitter
Rangeable DP Cell current loop process transmitter for monitoring differential pressures in a heavy duty process plant environment.
DMD331 Compact Differential Liquid Pressure Sensor
Wet wet differential pressure sensor with a high overpressure rating on both positive and negative pressure side for protection against damage.
PA430 Add-On LED Display
Plug-on digital display for adding a local indicator to a pressure or liquid level sensor with a 4-20mA or 0-10Vdc output and optional ATEX IS approval.
DMP333i Rangeable High Pressure Precision Transducer
High performance transducer with adjustable scaling for modifying the pressure range for different applications. Ranges from 0-60 bar up to 0-600 bar.
LMK458 Marine Approved Hydrostatic Level Transmitter
Marine approved level transmitter with 4-20mA output for measuring level of contents inside ship ballast, fuel, liquid cargo or wastewater tanks
TM Silicon Strain Gauge Pressure Transducer
Passive compensated pressure transducer with a four arm semiconductor Wheatstone bridge circuit which produces a 100 millivolt with a 10 volt excitation.
35X Flush Diaphragm Digital Output Pressure Sensor
Highly accurate digitally compensated pressure transducer with G1/2 male flush pressure port.
LEO Record (Ei) Capo Low Pressure Logger
Battery powered data logger for measuring and recording low range pressures. Pressure ranges from 30 mbar (12 inH2O) up to 300 mbar (120 inH2O).
DS210 Combined Low Pressure Switch, Indicator and Sensor
Low range three in one pressure switch, pressure indicator and pressure sensor for use on pneumatics and HVAC applications.
DS200 Combined Hydrostatic Level Switch, Gauge and Sensor
Three in one hydrostatic level switch, digital level gauge and level sensor with level ranges from 1 mWG up to 600 mWG (3.3 to 1969 ftWG).
LMK382 Low Range IP68 Waste Water Level Transmitter
Submersible Low Range waste water level transmitter with intrinsically safe option for monitoring the level of sewage and effluent in water treatment plants.
ECO1 / ECO 1 Ei / ECO 2 Low Cost Digital Manometer
Economically priced digital pressure gauge available in either a -1 to 30 bar or a 300 bar ranges with optional intrinsic safety.
P200IS Hazardous Area Digital Manometer
Digital pressure manometer for hazardous areas with pressure ranges from 100 mbar up to 2000 mbar differential or gauge plus 2000 mbar absolute.
DMP457 Marine Approved Pressure Transmitter
Marine approved stainless steel diaphragm pressure transmitter with 4-20mA current loop output for shipbuilding in ranges from 100mb to 600 bar gauge or absolute.
PD33X High Accuracy Differential Pressure Transmitter
High precision compact wet wet differential pressure transmitter with digitally corrected output signal in ranges from 0.3 to 30 bar
PD39X High Differential Pressure Transmitter
High pressure differential sensor with high over-pressure in scaleable differential ranges from 3 bar up to 300 bar differential.
TDP Plug-In Display for Pressure Transmitters
DIN 43650A plug-in current loop powered LED display with optional ATEX approval for intrinsically safe use in hazardous areas.
XPSA ATEX IS High Pressure Transmitter
ATEX approved hydraulic pressure sensor for instrinsically safe use in hazardous areas with a 4-20mA current loop output signal in pressure ranges from 50 up to 1000 bar gauge.
XSA ATEX IS Pressure Transmitter
ATEX approved silicon pressure sensor for intrinsically safe use in hazardous areas with a 4-20mA current loop output in pressure ranges from 250mb up to 60 bar gauge
LMP307 Submersible Level Transmitter
Submersible level transmitter for measuring liquid level with a 4-20mA current loop or a 0-10V voltage output plus optional ATEX approval for intrinsically safe use in hazardous areas in ranges from 1mH2O up to 250mH2O. The LMP307 is suitable for use on potable water with no leaching, and can be supplied with a drinking water certificate according to DVGW and KTW.