A high range fast response digital pressure sensor for industrial robotic automation testing use to measure pressure of hydraulic pressure spikes over a range of 0 to 1,000 bar g from the G1/4 male process connection, and sending the corresponding USB signal through the USB mini B connector electrical connection.
High Frequency Response
High frequency measurement reading information & product infomation for monitoring highly dynamic physical parameters.
A USB interface digital pressure sensor for fast reacting pressure relief device testing use to measure pressure of nitrogen gas over a range of 0 to 16 bar g from the G1/4 male process connection, and sending the corresponding signal through the USB mini B cable electrical connection.
High speed measurement reading response pressure sensing devices.
High speed measurement reading response, Universal Serial Bus (USB) interface computer connection pressure sensing devices.
USB ready digital pressure sensor for recording pressures with a high speed sample rate of up to 1 kHz to a computer. The UPS-HSR is supplied with a 2m long USB cable, PC software and case. Choose a pressure range from 2.5 bar up to 5000 bar with a G1/4 or 1/4 NPT male up to 1500 bar, and AE F-250-C female up to 5000 bar.
A low response time absolute pressure sensor for research use to measure pressure of freshwater over a range of 0 to 20 bar abs from the G1/4 male process connection, and sending the corresponding 4-20mA signal through the M12 connector electrical connection.
This pressure logger can record for months at time at a slow logging rate, and when a predefined event threshold is exceeded it will record pressure at a much faster rate.
The new DAC series allows accurate recording of measured values in extreme situations, such as pressure spikes or pressure surges, pressure gradients during explosions or combustions, e.g. in the case of ballistic measurements or the ignition of internal combustion engines.
Sensors & instrumentation that have a high frequency response measurement signal output or input.
High frequency response pressure sensor with a better than 0.5 millisecond response time and internal digital signal conditioning that samples readings at a rate of 10 kilohertz.
DMP320 which has a high sampling rate of 10 kHz so you will easily resolve the dynamic change characteristic over 0 to -200 psf within the 8sec window.
The DMD331 uses silicon technology which is very small compared to other sensing technologies which would have a more limited response time.
Do these gages have a fast enough response to capture the max pressure in particular?
The Triton IT Pressure Transient data logger can detect and log pressure surge data up to 1000 readings per second without interfering with the main recordings.
Passive compensated pressure transducer with a four arm semiconductor Wheatstone bridge circuit which produces a 100 millivolt with a 10 volt excitation.
Panel mount LED display instrument with up to 4 sensor input channels, 4 relay or logic outputs, high speed display update and maths function.
Battery powered digital gauge with an accuracy of 0.1% full scale in pressure ranges from -1 to 3 bar up to 1000 bar.
Ceramic strain gauge pressure transducer with a 2mV/V or 10mV/V output signal in pressure ranges from 1 bar up to 700 bar gauge or absolute.
For the best frequency response use a strain gauge pressure transducer that provides a mV output without any amplification.