The Gefran KX pressure sensor is ATEX Ex nA non-sparking approved for use in zone 2 hazardous areas with flammable gas or dust atmospheres, and is SIL 2 approved for additional safety. The KX is available in ranges from -1 to 1 bar up to 1000 bar.
Gefran are a manufacturer a range of sensors and panel instrumentation for use on industrial automation equipment.
A high range pressure sensor for waterjet cutting research use to measure pressure of freshwater over a range of 0 to 15,000 psi g from the 1/4 NPT male process connection, and sending the corresponding 0-5Vdc signal through the integral cable electrical connection.
A high range gauge pressure sensor for hydraulic press use to measure pressure of mineral hydraulic oil over a range of 0 to 10000 psi g from the 1/8 NPT male process connection, and sending the corresponding 4-20mA signal through the integral cable electrical connection.
Recording pressures up to 10,000 psi on a hydraulic press with a fast logging rate.
I need to visualise and record the parameters for one hydraulic piston. The piston will have a maximum working pressure of 350 bars, and I need to monitor the pressure in both directions.
Plastic melt pressure sensor with a GRAS compliant NaK filling fluid, 10,000 psi high pressure range and 0 to 10 Vdc output signal for use on blow moulding machines.
This pressure transducer will measure hydraulic pressure generated by a compression machine and produce a 3mV/V output sensitivity.
The Gefran KHC Series is a compact pressure sensor with a CANopen digital interface for use with vehicle digital networks. The KHC CANopen DS404 coms protocol pressure sensor is available in pressure ranges from 0-1 bar up to 0-1000 bar gauge.
The Gefran KS Series is a small size oil free all stainless steel pressure sensor with SIL2 certification for incorporating into the design of industrial automation machinery. The KS compact SIL2 approved pressure sensor is available in ranges from 0-1 bar up to 0-1000 bar gauge
The Gefran KH mobile hydraulics pressure sensor is a low cost compact stainless steel high pressure sensor for use in large quantity OEM applications on mobile vehicles. The KX is available in ranges from 4 bar / 60 psi up to 1000 bar / 15000 psi.
The Gefran KX pressure sensor is ATEX approved for use with intrinsic safety barriers in hazardous areas, and is SIL 2 approved for additional safety. The KX is available in ranges from -1 to 1 bar up to 1000 bar.
The TPFAS pressure sensor has a small size flush diaphragm which allows the use of a smaller size G1/4 (1/4 BSP) or M10 x 1 male thread for fitting where there is limited room or access to the process measurement point.
Gefran melt pressure transducers & transmitters for plastic extrusion, injection moulding & blow moulding applications. Find a pressure sensor here for use on highly viscous media at high temperatures.
Gefran range of industrial 4-20mA current loop output pressure transmitters for measuring pneumatic and hydraulic pressures on factory automation equipment and test systems.
2 hydraulic oil pressure transducers and an indicator to measure both sides of a 700 bar hydraulic cylinder.
Hydraulic pressure transmitter with a 6 pin military style electrical connector for intrinsically safe installations.
0 to 5000 bar pressure transmitter with a 9/16-18 UNF female (F-250-C) AE high pressure connection fitting and 4 to 20 milliamp current loop output.
The current installed sensor has a 200bar pressure, 20mA full scale output, 1/2″ 20UNF-2A thread
High pressure transducer for pressure testing applications with pressure ranges from 0…4 bar (60 psi) up to 0…1000 bar (15,000 psi) gauge with a measurement accuracy of 0.1%.
LED digital indicator for wheatstone bridge millivolt and potentiometer input signals with adjustable relay switches for controlling process equipment.
LED digital panel readout for strain gauge and potentiometer input signals with configurable process alarms, 5 digit LED display and an accuracy of 0.2%FS.
LED digital readout display with up to 4 configrable process alarm relays for mounting in a 48mm x 48mm (1/16 DIN) panel cutout.
Digital meter with a 4 digit display for mounting in a 48mm x 48mm (1/16 DIN) panel for measuring volts, current, TC, RTD, PTC, NTC or potentiometer signal.
Digital Readout with alarm relays for mounting in a process or test panel which can be used with pressure transducers & transmitters, thermocouples, RTD, potentiometers, current loop & amplified voltage output sensors.
Panel mount LED display instrument with up to 4 sensor input channels, 4 relay or logic outputs, high speed display update and maths function.
Digital Readout with LED display for mounting in a panel which can accept inputs from thermocouples, RTD, potentiometers, current loop & amplified voltage output sensors.
Green or Red LED multi-display configurable digital instrument for monitoring and controlling industrial processes.
DIN 43650A plug-in current loop powered LED display with optional ATEX approval for intrinsically safe use in hazardous areas.
Contactless zero tare & span adjustment high pressure transmitter with 4-20mA current loop or amplified voltage output signal in pressure ranges from 50 bar up to 1000 bar gauge.
Contactless magnetic coupling zero tare & span adjustment pressure transmitter with 4-20mA current loop or amplified voltage output signal in pressure ranges from -1 to +1 bar up to 500 bar gauge.
ATEX approved hydraulic pressure sensor for instrinsically safe use in hazardous areas with a 4-20mA current loop output signal in pressure ranges from 50 up to 1000 bar gauge.
ATEX approved silicon pressure sensor for intrinsically safe use in hazardous areas with a 4-20mA current loop output in pressure ranges from 250mb up to 60 bar gauge
Extra high pressure transmitter with 4-20mA current loop or amplified voltage output signal in pressure ranges from 1000 up to 5000 bar gauge.
Very high range pressure sensor with a millivolt output signal for pressure ranges from 1000 up to 5000 bar gauge.
Flush diaphragm pressure transmitter for high viscosity media in food processing and plastic injection moulding applications.
Flush diaphragm piezo-resistive pressure sensor for food processing and plastic injection moulding applications with a millivolt output signal in pressure ranges from 10 up to 1000 barg.
Strain gauge pressure sensor with a millivolt output direct from a four arm wheatstone bridge strain gauge circuit in pressure ranges from 10 up to 1000 bar gauge.
Precision pressure transmitter available with 4-20mA current loop or amplified voltage output signal in ranges from 50mb up to 60 bar gauge and from 500mb up to 40 bar absolute.
General purpose industrial pressure transmitter with a 4-20mA current loop or amplified voltage output available in range from -1 to +1 barg up to 500 barg