A low range gauge pressure sensor for building system boiler heating use to measure pressure of natural gas over a range of 0 to 3 psi g from the G1/4 male process connection, and sending the corresponding 4-20mA signal through the M12 connector electrical connection.
Gauge Pressure
Gauge pressure measurement instrumentation & application guides related to monitoring pressures relative to the surrounding atmospheric pressure.
300 psi g range 0-10 volts output ceramic diaphragm pressure sensor
Economical corrosion resistant ceramic diaphragm pressure sensor for measuring over a 0 to 300 pounds per square inch gauge pressure range and generating a 0 to 10 volts output signal.
10m range high resolution 4-20mA out submersible freshwater tank level sensor
A high resolution submersible water level sensor for submerging in a freshwater tank and measuring the depth over a range of 0 to 10m from the flush diaphragm, and sending the corresponding 4-20mA signal through the submersible cable electrical connection.
10m high chemical tank 4-20mA output submersible PVC and ceramic protected liquid level sensor
A submersible PVC and ceramic based construction liquid level sensor for submerging in a gravity drained or pumped liquid chemical tank and measuring the depth over a range of 0 to 10m from the nose cone, and sending the corresponding 4-20mA signal through the submersible cable electrical connection.
6,000 psig ATEX/IECEx IS approved 4-20mA pressure sensor for oil pumping use
An intrinsically safe all welded stainless steel gauge pressure sensor for oil pumping use to measure pressure of pumped oil over a range of 0 to 6,000 psi g from the G1/2 male process connection, and sending the corresponding 4-20mA signal through the weatherproof cable electrical connection.
5 metre range high accuracy 4-20mA output non-corrosive liquid level sensor with G1/4 male external fitting
A high accuracy externally mounted liquid level sensor for measuring the height of non-corrosive liquids over a range of 0 to 5m from the G1/4 male process connection, and sending the corresponding 4-20mA signal through the weatherproof cable gland electrical connection.
4 barg 4-20mA output ceramic diaphragm pressure sensor with G1/4 female
Economical corrosion resistant ceramic diaphragm pressure sensor with G1/4 female process connection for measuring over a 0 to 4 bar gauge pressure range and generating a 4 to 20 milliamps output signal.
280 inch range 4-20mA output urea tank flush diaphragm level sensor
An externally mounted tank level sensor for measuring the height of urea over a range of 0 to 280in from the G3/4 male DIN3852 with flush diaphragm process connection, and sending the corresponding 4-20mA signal through the flood proof cable electrical connection.
DCT143 IO-Link Interface Mobile Hydraulics OEM Short Length Pressure Sensor
All welded stainless steel IO-Link interface pressure sensor with a low profile for use by mobile hydraulics manufacturers to measure hydraulic pressures up to 600 bar or 9000 psi.
-20 to +50 psig 0-10V out compound range liquid dispensing pressure sensor
Positive and negative range pressure sensor for measuring liquid dispensing pressure over a -20 to +50 pounds per square inch gauge pressure range and generating a 0 to 10 volts output signal.
-1 to 20 bar g compound range IS 4-20mA propane pressure sensor for process control use
An intrinsically safe compound range pressure sensor for process control use to measure pressure of propane gas over a range of -1 to 20 bar g from the G1/4 male process connection, and sending the corresponding 4-20mA signal through the DIN plug electrical connection.
20 MPa g range 4-20mA output high pressure sensor and plug-on display for hydraulic control use
A high pressure sensor and plug-on display for hydraulic control use to measure pressure of mineral hydraulic oil over a range of 0 to 20 MPa g from the G1/8 male process connection, and sending the corresponding 4-20mA current loop signal through the DIN plug connector electrical connection.
-0.5 to +0.5 bar gauge 0-5 volts output compound range pressure sensor
OEM compound low range gauge pressure sensor with semiconductor strain gauges for measuring over a -0.5 to +0.5 bar gauge pressure range and generating a 0 to 5 volts output signal.
150 psig RS485 Modbus RTU chilled water pressure sensor for supply and return monitoring
A digital interface pressure sensor for flow monitoring use to measure pressure of chilled water supply & return over a range of 0 to 150 psi g from the 1/4 NPT male process connection, and sending the corresponding RS485 Modbus RTU protocol interface through the weatherproof cable electrical connection.
16 inch range 4-20mA output submersible shallow water tank level sensor
A low range submersible liquid level sensor for submerging in a shallow water tank and measuring the depth over a range of 0 to 16in from the flush open face diaphragm, and sending the corresponding 4-20mA signal through the submersible cable electrical connection.
500 psig 4-20mA anhydrous ammonia pressure sensor for controlling refrigeration condenser fans and pumps
An all welded stainless steel pressure sensor for refrigeration condenser fan and pump control use to measure pressure of anhydrous ammonia (NH3) over a range of 0 to 500 psi g from the 1/4 NPT male process connection, and sending the corresponding 4-20mA signal through the DIN plug electrical connection.
10 barg food and beverage pressure gauge with 4-20mA output
Digital display pressure gauge for pipe mounted use in food or beverage measurement applications, capable of measuring 0 to 10 bar g pressure with 0.35% accuracy and connected using a 1/2 BSP P male fitting. Also includes 4-20mA output and cal cert.
1,500 psig 4-20mA out mineral hydraulic oil pressure sensor for material testing machines
A high accuracy gauge pressure sensor for hydraulic control use to measure pressure of mineral hydraulic oil on material tension and compression testing machines over a range of 0 to 1,500 psi g from the 1/4 NPT male process connection, and sending the corresponding 4-20mA signal through the field housing electrical connection.
3m range 4-20mA output submersible seawater dewatering tank level sensor
A low range submersible liquid level sensor for submerging in a seawater dewatering tank and measuring the depth over a range of 0 to 3m from the nose cone, and sending the corresponding 4-20mA signal through the submersible cable electrical connection.
300 barg 4-20mA synthetic hydraulic oil pressure transducer for hydraulic control use
An all welded high range pressure transducer for hydraulic control use to measure pressure of synthetic hydraulic oil over a range of 0 to 300 bar g from the G1/4 male process connection, and sending the corresponding 4-20mA signal through the M12 connector electrical connection.
3000 psig RS485 ModbusRTU interface synthetic hydraulic oil pressure sensor for testing use
A digital pressure sensor for testing use to measure pressure of synthetic hydraulic oil over a range of 0 to 3,000 psi g from the 1/4 NPT male process connection, and sending the corresponding RS485 signal through the M12 connector electrical connection.
40 inH2O g peak/valley storing pressure gauge for monitoring gas feed fluctuations
Low range intrinsically safe digital display pressure gauge for pipe mounted use in natural gas measurement applications on feeds to industrial gas boiler, capable of measuring 0 to 40 inH2O g pressure with 0.25% accuracy and connected using a 1/4 NPT male fitting. Also includes USB and peak & valley reading hold.
140 inch range rangeable 4-20mA output wastewater level sensor and display for external fitting
A digital display combine with a rangeable externally mounted liquid level sensor for measuring the height of wastewater over a range of 0 to 140in from the 1/4 NPT male process connection, and sending the corresponding 4-20mA signal through the M12 connector electrical connection.
10psig 4-20mA oily wastewater pressure sensor with hi-temp protection for tank level gauging use
A low range hi-temp media 150°C/302°F protected max gauge pressure sensor for tank level gauging use to measure pressure of oily wastewater over a range of 0 to 10 psi g from the 1/4 NPT male process connection, and sending the corresponding 4-20mA signal through the weatherproof cable electrical connection.
-0.1 to +0.1 inH2O g range 4-20mA signal air pressure sensor and display for pharmaceutical manufacturing use
A positive/negative gauge low range pressure sensor and digital display for pharmaceutical manufacturing use to measure pressure of air over a range of -0.1 to 0.1 inH2O g from the 6mm flexible tubing connection, and sending the corresponding 4-20mA signal through the M12 x 1.5 cable gland and internal screw terminal electrical connection.
-5 to +5 psig bidirectional low range 0-5 volts output pressure sensor
Economical bidirectional low range stainless steel diaphragm pressure sensor with semiconductor strain gauges for measuring over a -5 to +5 psig psi gauge pressure range and generating a 0 to 5 volts output signal.
10 psig 4-20mA out submersible freshwater pressure sensor for underwater structure research
A submersible pressure sensor for underwater research use to measure pressure of freshwater over a range of 0 to 10 psi g from the 1/4 NPT male process connection, and sending the corresponding 4-20mA signal through the submersible cable electrical connection.
All welded wetted parts 10000 psig 0-10Vdc out pressure sensor for hydraulic control use
A robust all welded wetted parts high range pressure sensor for hydraulic control use to measure pressure of mineral hydraulic oil over a range of 0 to 10,000 psi g from the G1/2 EN837 male process connection, and sending the corresponding 0-10Vdc signal through the M12 connector electrical connection.
Farm drainage open well 60ft range 4-20mA output submersible liquid level sensor
Low cost submersible water level sensor with ceramic thick film strain gauge technology for measuring farm drainage open well over 0 to 60 ftH2O hydrostatic pressure range and sending out a 4 to 20 milliamps signal.
30 barg 1-5Vdc output saltwater pressure sensor for jockey fire fighting pump use
A salt water pressure sensor for flow monitoring use to measure pressure of saltwater from a jockey fire fighting pump over a range of 0 to 30 bar g from the 1/4 NPT male process connection, and sending the corresponding 1-5Vdc signal through the DIN plug electrical connection.
7.5 psig range 0-5V output submersible silicon diaphragm liquid level sensor
Low cost stainless steel 316L submersible liquid level sensor with silicon strain gauge technology for measuring over a 7.5 psi gauge hydrostatic pressure range and sending out a 0 to 5 volts signal.
1 mbar range 4-20mA output biogas pressure transmitter for controlling blower fan connected to a covered lagoon
An intrinsically safe very low range pressure transmitter to measure pressure of biogas under covered lagoon to control a blower fan, over a range of 0 to 1 mbar g from the 1/4 inch NPT female tapered thread process connection, and sending the corresponding 4-20mA signal through the terminal clamps and M20 x 1.5 cable gland electrical connection.
10000 psig range 0-5Vdc output mineral oil high pressure sensor for hydraulic cylinder use
A high range pressure sensor for hydraulic control use to measure pressure of mineral oil in a hydraulic cylinder over a range of 0 to 10,000 psi g from the 1/2 NPT male process connection, and sending the corresponding 0-5Vdc signal through the weatherproof cable electrical connection.
Submersible 3mWG range 4-20mA output liquid level and PT1000 temperature sensor
LLow cost stainless steel 316L submersible liquid level sensor with PT1000 temperature sensor for measuring over a 0 to 3 mWG hydrostatic pressure range and sending out a 4 to 20 milliamps signal.
10 bar g range wireless pressure sensing kit for BMS monitoring use
Wireless pressure measurement kit for building management system controls use with a 10barg range plus a 1/4 BSP male fitting. Each pressure reading is transmitted wirelessly to a five channel base receiver, where it is converted to a 1-5Vdc or 4-20mA analogue output signal.
0 to -200 mbar negative gauge suction range 4-20mA output stainless steel pressure sensor
Economical stainless steel diaphragm pressure sensor with semiconductor strain gauges for measuring over a 0 to -200 mbar negative gauge suction range and generating a 4 to 20 milliamps output signal.
30000 psig 0-10Vdc output freshwater pressure sensor for high pressure valve test rigs
A high absolute range pressure sensor for testing high pressure valves and measuring pressure of freshwater over a range of 0 to 30,000 psi absolute from the 9/16 UNF female (AE HP type) process connection, and sending the corresponding 0-10Vdc signal through the DIN plug electrical connection.
20 inH2Og range 4-20mA output natural gas pressure transducer for commercial generator use
An intrinsically safe low gauge range pressure transducer for use on commercial generators to measure pressure of natural gas over a range of 0 to 20 inH2O g from the 1/2 NPT male process connection, and sending the corresponding 4-20mA signal through the weatherproof cable electrical connection.
3000 psig range 0-10Vdc output digital display pressure transducer for hydraulic control use
A digital display pressure transducer for hydraulic control use to measure pressure of mineral hydraulic oil over a range of 0 to 3,000 psi g from the 1/4 NPT male process connection, and sending the corresponding 0-10Vdc signal through the DIN plug electrical connection.
50cm range 0.5-4.5Vdc output submersible small diesel fuel tank level sensor
A submersible liquid level sensor for submerging in a small diesel fuel tank and measuring the depth over a range of 0 to 50cm from the diaphragm behind the nose cone, and sending the corresponding 0.5-4.5Vdc signal through the submersible cable electrical connection.
50cm range 4-20mA water level sensor for hot tub and spa service water tanks
A low range water level sensor for measuring the height of freshwater service water tanks for hot tubs and spas over a range of 0 to 50cm from the G1/2 male process connection, and sending the corresponding 4-20mA signal through the weather proof cable electrical connection.
100 inH2Og 4-20mA low concentration acid solution pressure sensor for CIP cleaning
A food grade gauge pressure sensor for CIP cleaning process use to measure pressure of low concentration acid solution over a range of 0 to 100 inH2O g from the dairy pipe process connection, and sending the corresponding 4-20mA signal through the M12 connector electrical connection.
150 psig 0-10Vdc output freon refrigerant gas pressure sensor for refrigeration control systems
An all welded stainless steel gauge pressure sensor for hvac use to measure pressure of freon refrigerant gas in refrigeration control systems over a range of 0 to 150 psi g from the 1/4 NPT male process connection, and sending the corresponding 0-10Vdc signal through the weatherproof cable electrical connection.
60000 psig range 0-10Vdc output engine oil pressure sensor for high pressure homogenization use
An all welded very high range pressure sensor for high pressure homogenization use to measure pressure of engine oil over a range of 0 to 60,000 psi g from the 9/16 UNF female (AE HP type) process connection, and sending the corresponding 0-10Vdc signal through the PTIH-10-6P military style electrical connection.
100 psig range 4-20mA output freshwater hydrostatic pressure transducer for tank level gauging use
A hydrostatic pressure transducer for tank level gauging use to measure pressure of freshwater over a range of 0 to 100 psi g from the 1/4 NPT male process connection, and sending the corresponding 4-20mA signal through the weatherproof cable electrical connection.
10000 psig range USB output mineral hydraulic oil pressure sensor for component testing use
A digital pressure sensor for component testing use to measure pressure of mineral hydraulic oil over a range of 0 to 10,000 psi g from the 1/4 BSP P male process connection, and sending the corresponding digital signal through the waterproof cable electrical connection.
500 kPa g range rupture disk blowing digital display pressure gauge and logger
Digital display pressure gauge for pipe mounted use in applications to monitor blowing of rupture disks, capable of measuring 0 to 500 kPa g pressure with 0.05% accuracy and connected using a 1/2 NPT male fitting. Also includes USB, logger, peak hold, log software and traceable cal cert.
800 kPa g range 4-20mA output freshwater pressure sensor for agricultural pump use
A robust pressure sensor with field housing protected electronics for agricultural pump use to measure pressure of freshwater over a range of 0 to 800 kPa g from the 1/4 BSP P male process connection, and sending the corresponding 4-20mA signal through the field housing electrical connection.
600 barg 0-20mA output hydraulic oil pressure transmitter for mobile rail vehicle system controls
A high range pressure transmitter for hydraulic control use to measure pressure of mineral hydraulic oil on mobile rail vehicle systems over a range of 0 to 600 bar g from the G1/2 male process connection, and sending the corresponding 0-20mA signal through the DIN plug electrical connection.
6m range 4-20mA output water tank level sensor for external fitting
A externally mounted water tank level sensor for measuring the height of water over a range of 0 to 6m from the G1/4 male process connection, and sending the corresponding 4-20mA signal through the M12 connector electrical connection.
250cm range 0-10Vdc output plastic submersible chemical tank level sensor
A plastic submersible liquid level sensor for submerging in a chemical tank and measuring the depth over a range of 0 to 250cm from the nose cone, and sending the corresponding 0-10Vdc signal through the submersible FEP coated cable electrical connection.
5000 psig range 0-5Vdc output mineral oil pressure sensor for hydraulic control use
A high range pressure sensor for hydraulic control use to measure pressure of mineral hydraulic oil over a range of 0 to 5,000 psi g from the 1/4 NPT male process connection, and sending the corresponding 0-5Vdc signal through the M12 connector electrical connection.
1.5 psig range 4-20mA output freshwater tank fluid level pressure sensor for farming use
A low range pressure sensor for farming use to measure freshwater tank fluid level over a range of 0 to 1.5 psi g from the 1/4 NPT male process connection, and sending the corresponding 4-20mA signal through the weatherproof cable electrical connection.
Greenhouse clean water tank 15 mWG 4-20mA submersible level sensor
Low cost submersible liquid level sensor with ceramic thick film strain gauge technology for measuring level of greenhouse clean water tanks over a 0 to 15 mWG gauge hydrostatic pressure range and sending out a 4 to 20 milliamps signal.
9m 4-20mA ship fish storage seawater storage tank submersible level sensor
A marine approved submersible liquid level sensor for submerging in a ship seawater tank for fish storage use and measuring the depth over a range of 0 to 9m from the flush diaphragm, and sending the corresponding 4-20mA signal through the submersible cable electrical connection.
15psig 0-5Vdc out air gasoline mixture pressure sensor for automotive supercharger booster testing
A gauge pressure sensor for automotive supercharger booster testing use to measure pressure of air and gasoline mixture over a range of 0 to 15 psi g from the 1/8 NPT male process connection, and sending the corresponding 0-5Vdc signal through the waterproof cable electrical connection.
100 psig range landfill leachate pressure gauge with 4-20mA output for SCADA sytem
Intrinsically safe analogue output signal pressure gauge for pipe mounted use in leachate measurement applications, capable of measuring 0 to 100 psi g pressure with 0.5% accuracy and connected using a 1/4 NPT male fitting. Also includes 4-20mA for linking to a SCADA system.
2barg, 10barg range wireless pressure sensing kit for production monitoring use
Wireless pressure measurement kit for production monitoring use with a -1barg, 2barg, 10barg range plus a 1/4 BSP male fitting. Each pressure reading is transmitted wirelessly to a five channel base receiver, where it is converted to a 1-5Vdc or 4-20mA analogue output signal.
7 bar gauge range 0 to 5 volts output ceramic diaphragm pressure sensor
Economical corrosion resistant ceramic diaphragm pressure sensor for measuring over a 0 to 7 bar gauge pressure range and generating a 0 to 5 volts output signal.
15psig 0-10Vdc output pressure sensor for nitrogen filled antenna line leak testing use
A high resolution analog voltage output pressure sensor for nitrogen filled antenna line leak testing use to measure pressure of nitrogen over a range of 0 to 15 psi g from the 1/4 NPT male process connection, and sending the corresponding 0-10Vdc signal through the DIN plug electrical connection.
0.6 barg range 4-20mA output submersible silicon diaphragm liquid level sensor
Low cost stainless steel 316L submersible liquid level sensor with silicon strain gauge technology for measuring over a 0.6 bar gauge hydrostatic pressure range and sending out a 4 to 20 milliamps signal.
200 kPa g range 4-20mA output freshwater pressure sensor for water treatment use
A gauge pressure sensor for water treatment use to measure pressure of freshwater over a range of 0 to 200 kPa g from the G1/4 male process connection, and sending the corresponding 4-20mA signal through the DIN plug electrical connection.
150cm range 0-10Vdc output bulk milk cooler level sensor with dairy pipe fitting
A food grade externally mounted liquid level sensor for measuring the height of milk over a range of 0 to 150cm from the dairy pipe process connection, and sending the corresponding 0-10Vdc signal through the weather proof cable electrical connection.
0.5mH2Og range ratiometric 0.5-4.5V output submersible sump pump water level sensor
Low range submersible water level sensor with silicon strain gauge technology for measuring sump pump water level over a 0.5 mH2O gauge hydrostatic pressure range and sending out a ratiometric 0.5 to 4.5 volts signal.
300barg low volts power supply 0-5Vdc output pressure sensor for air compression use
A low volts power supply pressure sensor for air compression use to measure pressure of air over a range of 0 to 300 bar g from the 1/8 BSP P male process connection, and sending the corresponding 0-5Vdc signal through the Open wire electrical connection.
150psig range 4-20mA high temperature pressure sensor for steam generator system use
A high temperature pressure sensor for steam generator system integration use to measure pressure of steam over a range of 0 to 150 psi g from the G1/2 male process connection, and sending the corresponding 4-20mA signal through the M12 connector electrical connection.
2.5 barg RS485 Modbus RTU interface air pressure transducer for production test automation use
A digital interface pressure transducer for production test automation use to measure pressure of air over a range of 0 to 2.5 bar g from the G1/4 male process connection, and sending the corresponding RS485 Modbus RTU communications signal through the Binder 723 connector electrical connection.
50cm range 0-10Vdc output freshwater level sensor for external fitting
A low range externally mounted water level sensor for measuring the height of freshwater over a range of 0 to 50cm from the G1/4 male process connection, and sending the corresponding 0-10Vdc signal through the M12 connector electrical connection.
-10…30 kPa g compound range inert gas pressure transmitter for ship IG system
An intrinsically safe, marine approved compound range pressure transmitter for ship cargo tank IG system use to measure pressure of inert gas over a range of -10 to 30 kPa g from the G1/2 male process connection, and sending the corresponding 4-20mA signal through the DIN plug electrical connection.
Duplex steel 1500psig 0-5V output seawater pressure sensor for water treatment use
A duplex steel pressure sensor for water treatment use to measure pressure of seawater over a range of 0 to 1,500 psi g from the 1/4 NPT male process connection, and sending the corresponding 0-5Vdc signal through the DIN plug electrical connection.
5psig 0-10V out freshwater pressure transducer and built-in display for water purifier use
A combined digital display and low range gauge pressure transducer for water purifier use to measure pressure of freshwater over a range of 0 to 5 psi g from the 1/2 NPT male process connection, and sending the corresponding 0-10Vdc signal through the DIN plug electrical connection.
100 psig strain gauge mV/V output air pressure sensor for food processing use
A strain gauge output pressure sensor for food processing use to measure pressure of air over a range of 0 to 100 psi g from the 1/4 NPT male process connection, and sending the corresponding mV/V signal through the DIN plug electrical connection.
4000mm range 0-5Vdc output diesel tank level sensor for external fitting
A low range externally mounted liquid level sensor for measuring the height of diesel over a range of 0 to 4000 mm from the 1/4 NPT male process connection, and sending the corresponding 0-5Vdc signal through the DIN plug electrical connection.
400 kg/cm2 g range pipe mounted digital display air pressure gauge with 1/4 NPT male fitting
Digital display pressure gauge for pipe mounted use in air measurement applications, capable of measuring 0 to 400 kg/cm2 g pressure with 0.1% accuracy and connected using a 1/4 NPT male fitting. Also includes IS approval.
25 psig range high resolution 0-10Vdc output air pressure sensor for leak testing use
A high resolution gauge pressure sensor for leak testing use to measure pressure of air over a range of 0 to 25 psi g from the 1/4 NPT male process connection, and sending the corresponding 0-10Vdc signal through the integral cable electrical connection.
20barg range 4-20mA output air pressure sensor for pneumatic valve leak testing use
A high resolution pressure sensor for pneumatic valve leak testing use to measure pressure of air over a range of 0 to 20 bar g from the G1/2 male process connection, and sending the corresponding 4-20mA signal through the M12 connector electrical connection.
50in range 4-20mA output chemical liquid level sensor with flush diaphragm and IS approval
An intrinsically safe externally mounted liquid level sensor for measuring the height of a liquid chemical over a range of 0 to 50in from the triclamp process connection, and sending the corresponding 4-20mA signal through the M12 connector electrical connection.
3 bar g range 4-20mA output ceramic diaphragm pressure sensor
Economical corrosion resistant ceramic diaphragm pressure sensor for measuring over a 0 to 3 bar gauge pressure range and generating a 4 to 20 milliamps output signal.
2000 psi g range 4-20mA output ceramic diaphragm pressure sensor
Economical corrosion resistant ceramic diaphragm pressure sensor for measuring over a 0-2000 psi gauge pressure range and generating a 4 to 20 milliamps output signal.
2ft range 0-10Vdc output submersible freshwater tank level sensor
A low range submersible liquid level sensor for submerging in a freshwater tank and measuring the depth over a range of 0 to 2ft from the flush diaphragm, and sending the corresponding 0-10Vdc signal through the submersible cable electrical connection.
50000 psig 4-20mA mineral hydraulic oil pressure sensor for chemical processing use
An intrinsically safe ultra high range pressure sensor for chemical processing use to measure pressure of mineral hydraulic oil over a range of 0 to 50,000 psi g from the 9/16 UNF female process connection, and sending the corresponding 4-20mA signal through the integral cable electrical connection.
250psig air regulator pressure gauge with 4-20mA output and 1/4 NPT male fitting
Digital display pressure gauge with 4-20mA output signal for pipe mounted use in air regulator measurement applications, capable of measuring 0 to 250 psi g pressure with 0.5% accuracy and connected using a 1/4 NPT male fitting.
10 barg range 4-20mA output saltwater pressure sensor for sea water heat exchanger use
A CuNi10Fe1Mn housing pressure sensor for sea water heat exchanger use to measure pressure of saltwater over a range of 0 to 10 bar g from the G1/2 male process connection, and sending the corresponding 4-20mA signal through the DIN plug electrical connection.
100 psig range mV/V output air pressure sensor for food processing use
A millivolt output pressure sensor for food processing use to measure pressure of air over a range of 0 to 100 psi g from the 1/4 NPT male process connection, and sending the corresponding mV/V signal through the DIN plug electrical connection.
15000 psig range 0-5Vdc output freshwater pressure sensor for waterjet cutting research use
A high range pressure sensor for waterjet cutting research use to measure pressure of freshwater over a range of 0 to 15,000 psi g from the 1/4 NPT male process connection, and sending the corresponding 0-5Vdc signal through the integral cable electrical connection.
40 ftH2Og range 1-5Vdc output freshwater pressure sensor for environmental monitoring use
A gauge pressure sensor for environmental monitoring use to measure pressure of freshwater over a range of 0 to 40 ftH2O g from the 1/8 NPT male process connection, and sending the corresponding 1-5Vdc signal through the DIN plug electrical connection.
200cm range 0-5Vdc output submersible road flood stream depth and PT1000 sensor
A submersible water temperature and depth sensor for submerging in a road flood stream and measuring the depth over a range of 0 to 200cm from the nose cone, and sending the corresponding 0-5Vdc signal through the submersible cable electrical connection.
100 mbar g low range air pressure gauge and logger with G1/4 male fitting
Low range digital display pressure gauge for portable use in air measurement applications, capable of measuring 0 to 100 mbar g pressure with 0.25% accuracy and connected using a G1/4 male fitting. Also includes USB, logger and cal cert.
3m range 4-20mA output submersible hot water tank level sensor
A hi-temp media 125°C/257°F max submersible water level sensor for submerging in a hot water tank and measuring the depth over a range of 0 to 3m from the nose cone, and sending the corresponding 4-20mA signal through the submersible cable electrical connection.
60psig range pharmaceutical pressure gauge and 0-10Vdc transducer with triclamp fitting
Digital display pressure gauge for portable use in pharmaceutical measurement applications, capable of measuring 0 to 60 psi g pressure with 0.5% accuracy and connected using a triclamp fitting. Also includes a 0-10Vdc output, hygienic fitting and cal cert.
-5 to +5 psi g low compound range 4 to 20 mA output OEM pressure sensor
Low compound range OEM pressure sensor with semiconductor strain gauges for measuring over a -5 to +5 psi gauge pressure range and generating a 4 to 20 milliamps output signal.
12 inch range 4-20mA output submersible freshwater tank level sensor
A very low range submersible liquid level sensor for submerging in a freshwater tank and measuring the depth over a range of 0 to 12in from the nose cone, and sending the corresponding 4-20mA signal through the submersible cable electrical connection.
20 bar g range 4 to 20 mA output ceramic diaphragm pressure sensor
Economical corrosion resistant ceramic diaphragm pressure sensor for measuring over a 0-20 bar gauge pressure range and generating a 4 to 20 milliamps output signal.
2 bar g range 4 to 20 mA output ceramic diaphragm pressure sensor
Economical corrosion resistant ceramic diaphragm pressure sensor for measuring over a 0-2 bar gauge pressure range and generating a 4 to 20 milliamps output signal.
20 mbarg digital display air pressure indicator and transmitter with 1/4 NPT male fitting
Low range digital display pressure indicator and transmitter for pipe mounted use in air measurement applications, capable of measuring 0 to 20 mbar g pressure with 1% accuracy and connected using a 1/4 NPT male fitting.
0.05 barg range 4-20mA out waterproof low range water level sensor
Waterproof low range water level sensor with silicon strain gauge technology for measuring over a 0.05 bar gauge hydrostatic pressure range and sending out a 4 to 20 milliamps signal.
6m range 4-20mA submersible animal feed tank level and PT100 sensor
A hi-temp media 125°C/257°F max, RTD temperature measurement submersible liquid level sensor for submerging in an animal feed tank and measuring the depth over a range of 0 to 6m from the flush diaphragm, and sending the corresponding 4-20mA signal through the submersible cable electrical connection.
500psig 4-20mA freshwater display, switch and pressure sensor for building management use
A combined digital display, switch contacts and gauge pressure sensor for building management use to measure pressure of freshwater over a range of 0 to 500 psi g from the 1/4 NPT male process connection, and sending the corresponding 4-20mA signal through the DIN plug electrical connection.
4 barg range 0-5Vdc output hi-temp humidified gas pressure sensor for research use
A hi-temp media 150°C/302°F max gauge pressure sensor for research use to measure pressure of humidified gases over a range of 0 to 4 bar g from the 1/4 NPT male process connection, and sending the corresponding 0-5Vdc signal through the DIN plug electrical connection.
10 barg range 4-20mA output steam pressure sensor for food processing use
A hi-temp media 150°C/302°F max gauge pressure sensor for food processing use to measure pressure of steam header prior to multi-stage heater over a range of 0 to 10 bar g from the G1/2 male process connection, and sending the corresponding 4-20mA signal through the DIN plug electrical connection.