Exposed flush face diaphragm pressure sensor with millivolt output signals for measuring the pressures of high viscosity liquids or where the internal volume of the pressure connection needs to be eliminated.
Flush Diaphragm
Flush diaphragm pressure transducer, transmitter, switch and gauge product specs & help guides for measuring pressure or level with exposed diaphragms to prevent build up of material and to facilitate easy cleaning.
Corrosive Chemical Compatible Flush Diaphragm Liquid Level Sensors
Fluid level sensors with plastic bodies and flush ceramic diaphragms for use with corrosive chemicals where no metal parts can be exposed to the media.
Flush Diaphragm Electronic Pressure Switches
Solid state pressure switches with open diaphragm connections for sending a switch signal for controlling devices such pressure relief valves or a process fill pump.
Flush Diaphragm Liquid Level Sensors
Liquid level sensors for wastewater and slurry applications requiring measurement of a few metres of liquid height with an open face diaphragm to prevent clogging.
DCT531P RS485 Modbus RTU Flush Pressure Sensor
RS485 Modbus RTU serial interface pressure sensor with exposed all welded stainless steel 316L flush diaphragm in ranges from 100mb up to 40 bar gauge or absolute.
DCL 551 RS485 Modbus RTU Submersible Low Range Fuel, Oil & Wastewater Level Probe
Low range digital interface submersible liquid level probe with RS 485 Modbus RTU protocol serial bus communications for measuring level of fuel, oil and wastewater in low fill height open tanks.
DCL 571 RS485 Modbus RTU Submersible 22mm dia Groundwater & Wastewater Level Probe
22mm diameter digital interface submersible liquid level probe with RS 485 Modbus RTU protocol serial bus communications for installing in 1″ diameter tubes to measure groundwater level and measuring wastewater with nose cone removed.
Canola oil tank hygienic level sensor & indicator with high temperature protection
Instrument for measuring the level of a used Canola oil tank, and tolerate temperatures of up to 190 degrees Celsius.
Ebb & Flow (Flood & Drain) Horticulture Hydroponic System 100mm Water Level Sensor
We are looking for a level sensor for measuring from 0 to 100mm of water height, in an ebb and flow horticulture hydroponic system used in greenhouses and indoor farms.
LMK 487 Submersible Ballast Tank and Draught Level Pressure Transmitter
A 22mm diameter titanium body seawater depth and level probe with a 4-20mA output with Lloyds and DNV-GL ship approval, for monitoring the quantity of ballast or the draft of a ship’s hull.
Brewing tank 2000mm range 0-5Vdc output stainless steel 316L beer level sensor
A brewery grade externally mounted liquid level sensor for measuring the height of beer over a range of 0 to 2,000mm from the triclamp process connection, and sending the corresponding 0-5Vdc signal through the CIP cleaning proof cable electrical connection.
Dairy farm 6m high milk storage vat 4-20mA level transmitter
A food grade externally mounted dairy level transmitter for measuring the height of milk in farm storage vats over a range of 0 to 6m from the dairy pipe process connection, and sending the corresponding 4-20mA signal through the water proof cable electrical connection.
ELPO car paint plant 40ft high wastewater tank level transmitter
An externally mounted liquid level transmitter for measuring the height of wastewater from a electro-coat paint operation in a car paint plant over a range of 0 to 40ft from the G1 1/2 flush diaphragm process connection, and sending the corresponding 4-20mA signal through the weather proof cable electrical connection.
Grease trap waste receiving tank 2m range 4-20mA level transmitter
An externally mounted liquid level transmitter for measuring the height of wastewater in a grease trap waste receiving tank over a range of 0 to 2m from the G1 1/2 flush diaphragm process connection, and sending the corresponding 4-20mA signal through the DIN plug electrical connection.
Food processing freshwater transfer pump 4 barg 4-20mA pressure sensor
A hygienic stainless steel flush diaphragm gauge pressure sensor for food processing pump transfer system to measure pressure of freshwater over a range of 0 to 4 bar g from the tri-clamp process connection, and sending the corresponding 4-20mA signal through the M12 connector electrical connection.
200 inch range 0-10Vdc output level sensor for soap water with up to 50% NaOH concentration
An externally mounted liquid level transducer for measuring the height of soap water solution with up to 50% NaOH concentration, over a range of 0 to 200in from the G1 1/2 male process connection, and sending the corresponding 0-10Vdc signal through the DIN plug electrical connection.
280 inch range 4-20mA output urea tank flush diaphragm level sensor
An externally mounted tank level sensor for measuring the height of urea over a range of 0 to 280in from the G3/4 male DIN3852 with flush diaphragm process connection, and sending the corresponding 4-20mA signal through the flood proof cable electrical connection.
50in range 4-20mA output chemical liquid level sensor with flush diaphragm and IS approval
An intrinsically safe externally mounted liquid level sensor for measuring the height of a liquid chemical over a range of 0 to 50in from the triclamp process connection, and sending the corresponding 4-20mA signal through the M12 connector electrical connection.
60psig range pharmaceutical pressure gauge and 0-10Vdc transducer with triclamp fitting
Digital display pressure gauge for portable use in pharmaceutical measurement applications, capable of measuring 0 to 60 psi g pressure with 0.5% accuracy and connected using a triclamp fitting. Also includes a 0-10Vdc output, hygienic fitting and cal cert.
6 bar absolute range 4-20mA output high temperature epoxy resin pressure sensor for research use
A high viscosity fluid absolute pressure sensor with hi-temp media 150°C/302°F max protection for research use to measure pressure of epoxy resin over a range of 0 to 6 bar abs from the G1/2 male with flush diaphragm process connection, and sending the corresponding 4-20mA signal through the integral cable electrical connection.
50-70 psi g range freshwater compatible 0-10V signal out pressure sensor for water treatment use
A food grade gauge pressure sensor for water treatment use to measure pressure of freshwater over a range of 50 to 70 psi g from the triclamp process connection, and sending the corresponding 0-10Vdc signal through the M12 connector electrical connection.
Beverage tank liquid level sensor for beer, wine, spirits or cider
Hygienic liquid level sensor for mounting to the side of a beverage tank used to store beer, wine, spirits or cider.
Blow moulding machine 10,000 psi GRAS NaK filled 10V melt pressure sensor
Plastic melt pressure sensor with a GRAS compliant NaK filling fluid, 10,000 psi high pressure range and 0 to 10 Vdc output signal for use on blow moulding machines.
Sanitary Process Fitting Flush Diaphragm Digital Pressure Gauges
Sanitary cleanable stainless steel process connection, open face flush diaphragm mounted digital display readout pressure gauges.
Powder filter blockage monitoring pressure transmitter
The DMP331 is a pressure transmitter which is both ATEX and IECEx intrinsically safe approved for use in zone 20 potentially explosive dust environments.
TPFAS Miniature Flush Diaphragm Pressure Sensor
The TPFAS pressure sensor has a small size flush diaphragm which allows the use of a smaller size G1/4 (1/4 BSP) or M10 x 1 male thread for fitting where there is limited room or access to the process measurement point.
Gefran Melt Pressure Sensor
Gefran melt pressure transducers & transmitters for plastic extrusion, injection moulding & blow moulding applications. Find a pressure sensor here for use on highly viscous media at high temperatures.
Flush Diaphragm Pressure Gauges
Pressure gauges with exposed flush diaphragms without any internal volume within the process connection.
Flush Diaphragm Voltage Output Pressure Transducers
Flush fitting pressure transducers with high level voltage outputs and exposed diaphragms for use with media requiring hygienic compatibility such as food, beverage and pharmaceuticals or viscous fluids.
Flush Diaphragm Pressure Transmitters
Flush diaphragm pressure transmitters with 4 to 20mA current loop signal output with exposed diaphragms.
35X HTT High Temperature Compensated Pressure Sensor
Pressure sensor for applications in bio-reactors or autoclaves. The transmitter is compensated up to 150 °C and may be operated continuously or sterilised at this level, including the conditioning electronics up to 120°C.
LMK387 Cleanable Sewage and Sludge Pressure/Level Sensor
Rugged and easily cleanable pressure/level sensor for use with waste water sewage or sludge.
35X HTC High Temperature Digital Pressure Sensor (< 300 degC)
The 35X HTC high temperature digital pressure sensor is suited for media temperatures up to 300 °C
Diaphragm sealed high temperature pressure transmitter for -1 to 25 kg/cm²
Diaphragm sealed pressure transmitter for measuring over -1 to 25 kg/cm² on liquid with a flush type diaphragm up to a temperature of 190°C.
Water reclamation system 6 bar range pressure transmitter for marine use
Marine certified pressure transmitter for use in water reclamation system with a flush diaphragm to discourage build up of solids on the diaphragm face.
LMK307 Submersible Waste Water Level Sensor
Submersible waste water level sensor with optional intrinsic safety certification for monitoring the level of sewage and effluent in water treatment plants.
DMK331P Flush Diaphragm Pressure Sensor
Screw-in pressure transmitter with flush stainless steel 316L diaphragm for measuring pressures of fluids with very high viscosity from 900 up to 6000 psi
LMK351 High Overpressure Flush Level Transmitter
Flush capacitive ceramic pressure sensor for measuring corrosive and viscous liquid level from levels 0.4 metres of water up to 200 mH2O.
LMK331 Screw-In Ceramic Level Transmitter
Level pressure sensor with semi-flush ceramic diaphragm and stainless steel or PVDF wetted parts in ranges from 0-4 to 600mH2O gauge.
DMP331P Hygienic Flush Pressure Transmitter
Sanitary pressure sensor wth exposed diaphragm with no crevices for high temperatures up to 300 Degrees Celsius in ranges from 100mb up to 40 bar gauge or absolute
Hygienic
Hygienic measurement instrumentation are designed for use by the food, drink and pharmaceutical industries, which require a high level of cleanliness in their manufacturing processes.
Flush Diaphragm
A guide to flush diaphragm pressure & level measurement instrumentation, including explanations, applications and a choice of products with flush process fittings.
Vacuum Logger for sewer system with flush diaphragm & intrinsic safety
Vacuum logger with ATEX hazardous area approval and flush diaphragm to monitor the vacuum supplied to a vacuum sewer system from a distant vacuum pump station.
Ranges below 60 bar no longer available for DMK331P
In the past we have purchased the DMK331P 505-1002-1-5-100-Z00-1-1-1-150, but we are now told that this part number is no longer available.
Flush mountable vacuum transmitter
Vacuum transmitter with flush mount thread connection for monitoring 0 to -1 bar full vacuum.
Printer and copier toner compatible 60 psi Flush Pressure Gauge and Switch
Flush diaphragm pressure gauge with switch contacts for measuring pressures of toner used in printers and copiers from 5 to 60 psi.
10 metre high vegetable oil level transducer with 0 to 10 volt output
Liquid level sensor for measuring the quantity of vegetable oil in a 10 metre high tank.
1 metre deep raw sewage ATEX approved submersible level transmitter
Submersible flush diaphragm raw sewage level transmitter for measuring levels of wastewater up to 1 metre in depth.
10 psi g range flush diaphragm stainless steel 316L pressure transmitter
Stainless steel 316L flush diaphragm pressure sensor for measuring up to 10 psi gauge. This sensor has a 4 to 20 milliamp current output and a 1inch BSP male screw-in port.
2m tank height, high temperature oil level sensor with 4-20mA out
Tank level sensor to measure tank height of hot oil up to 2 meters at a maximum temperature of 200 degC.
1 metre screw-in plastic level sensor for biodiesel/sulphuric acid mixture with 4 to 20 mA output
Screw-in liquid level sensor for measuring the height of biodiesel with 3% sulfuric acid (H2SO4) from 0 to 1 metre head
50 kPa negative gauge vacuum transmitter for Milk
Food compatible vacuum pressure sensor useful for pressure from 0 to minus 50 kilopascals.
90 psi g air pressure transducer for food processes up to 200 degC
High temperature hygienic air pressure sensor for use on an industrial popcorn maker.
30 ft high hygienic tank level transducer with 0 to 10 volt output for use with lubricants
Liquid level sensor for use with lubricants which has hygienic fittings for connecting to the outside of a lubricant storage tank.
160 bar g pressure transmitter for use with high temperature media up to 300 degC
High temperature and high pressure range pressure sensor with 4-20mA 2 wire output with 10 msec response time.
1000 mbar vacuum transmitter for use with waste toner dust
Intrinsically safe atex approved vacuum pressure sensing device with a 4-20 milliamp output for mounting in a vacuum header line for carrying waste print toner ink dust.
5000 psi g flush all stainless steel 316L pressure transmitter
Flush pressure sensor with a 5000 psi gauge pressure range and a 4 to 20 milliamp current output. This sensor has all stainless steel 316L wetted parts.
200 degC media temperature pressure sensor with 25 bar g range and 0 to 10 volts output
High temperature pressure transducer with 0-10V amplified output, 0-25 bar gauge pressure range and compatibility with a media temperature up to 200 degC (392 degF)
IP68 sewage level transmitter for monitoring up to 6 metres depth of waste water
Submersible ATEX approved liquid level sensor with a 4 to 20 milliamp output for measuring 0 to 20 feet of sewage.
RS485 submersible wastewater level and temperature sensor for 3 metre depth
Submersible waste water level and temperature probe with integral RS485 interface electronics for monitoring wastewater depth up to 3 meters.
G1/2 flush 60 psig pressure transmitter for thick liquids in Ex zones
Screw-in G1/2 threaded flush diaphragm pressure transmitter with a 0 to 60 psi gauge range
Submersible sensor for measuring sludge pressure in pipe
Submersible pressure sensor to measure 10 bar pressure in pipe that is IP68 for long term submersion in sludge up to 6 metres deep.
DS201P High Range Flush Pressure Gauge, Switch and Sensor
High pressure sensor, electronic switch and digital gauge with an all welded stainless steel flush diaphragm for high viscosity liquids.
DS200P Sanitary Low Range Pressure Gauge, Switch and Sensor
All in one electronic switch, gauge and sensor designed specifically for use in the food, drink and biomedical industry for measuring process pressures.
XMPi Process Plant Gauge and Absolute Pressure Transmitter
Process transmitter for measuring vacuum, steam, food, pharmaceutical, oil, gas and other pressure readings necessary for the monitoring and control of bulk production processes.
Baroli 05P High Range Flush Diaphragm Digital Pressure Gauge
Battery powered pressure gauge with exposed diaphragm for measuring high pressures of viscous fluids or media which requires high level of cleanliness.
Baroli 02P Low Range Flush Diaphragm Digital Pressure Gauge
All stainless steel 316L hygienic digital display pressure gauge for measuring low range pressures with ranges from 0-100 mbar up to 0-40 bar.
35X Flush Diaphragm Digital Output Pressure Sensor
Highly accurate digitally compensated pressure transducer with G1/2 male flush pressure port.
25 Ed Flame Proof Flush Diaphragm Pressure Transmitter
ATEX certified flame proof pressure transmitter with an open face pressure connection for use with pharmaceuticals or high viscosity media.
x|act i Rangeable Flush Pressure Transmitter with LCD Readout
Rangeable Pressure Transmitter with a hygienic all stainless steel construction with LCD digital readout display and optional HART communications.
LMK382 Low Range IP68 Waste Water Level Transmitter
Submersible Low Range waste water level transmitter with intrinsically safe option for monitoring the level of sewage and effluent in water treatment plants.
LMK807 Plastic Submersible Level Transmitter
IP68 mid range pressure transmitter for measuring the level of highly contaminated and aggressive liquid media with a body made from PP-HT.
LMK809 Plastic Submersible Low Level Transmitter
IP68 low range pressure transmitter for measuring the level of highly contaminated and agressive liquid media with a body made from PP-HT or PVDF.
CNS Submersible Low Level Transmitter
Immersible low pressure sensor for measuring shallow liquid level with a rangeable 4-20mA current loop or high level voltage output signal.
TPFADA Flush Diaphragm Pressure Transmitter
Flush diaphragm pressure transmitter for high viscosity media in food processing and plastic injection moulding applications.
TPF Flush Diaphragm Strain Gauge Pressure Sensor
Flush diaphragm piezo-resistive pressure sensor for food processing and plastic injection moulding applications with a millivolt output signal in pressure ranges from 10 up to 1000 barg.