A compact size compound range pressure sensor for oem use to measure pressure of air over a range of -20 to 20 inH2O g from the 1/8 BSP P male process connection, and sending the corresponding 0-10Vdc signal through the M12 connector electrical connection.
A bi-directional compound range pressure sensor for research use to measure vacuum and pressure of air over a range of -15 to 15 psi g from the G1/4 male process connection, and sending the corresponding 4-20mA signal through the DIN plug electrical connection.
A low range gauge pressure sensor for air cleaning use to measure pressure of air over a range of 0 to 5 inH2O g from the 1/4 NPT male process connection, and sending the corresponding 4-20mA signal through the DIN plug electrical connection.
We need a suitable gauge to use as a leak testing test set we are looking to build. We need to measure down to -10 mbar and monitor for 1 minute to ensure the leak rate is not greater than 1 mbar/minute.
Low range air pressure sensor for measuring -10 to +10 inH2O gauge compound pressure range.
I have an Argon filled chamber that I wish to measure pressure up to 100 millibar relative to atmosphere.
DMP343 is a capable of measuring a 40 millibar negative pressure with a 4-20mA scaling over 0 to -40 mbar.
DMP343 pneumatic pressure sensor for measuring very low range pressures on pneumatic control systems, heating, ventilation and air conditioning systems (HVAC) .
Pressure transmitter with a 0 to minus 2000 pascal pressure range and 2 wire 4 to 20 mA output signal. DMP343 Low Range Pressure Sensor Pressure Range: 0 to minus 20 mbar (-2000 Pa) gauge Output Signal: 4-20mA (2 wire) Electrical Connection: DIN43650A plug IP65 Pressure Connection: G1/2 DIN 3852 male
Atex rated pressure sensor for measuring up to 50 mbar in a round air duct installed in a potentially flammable area.
Pressure to current transmitter which can be powered from a 15-24vdc and output a 4-20 mA over a pressure range of 0-40 mbar gauge.
Intrinsically safe air pressure sensor with a 4 to 20 milliamp loop signal out for air pressures up to 3000 pascals.
Suction pressure sensor 0 to -15 mbar gauge range, with an output of 4-20mA, a 1/4 NPT male thread and ATEX approval.
4-20mA output pressure transmitter for measuring air pressures up to 50 mbar gauge in intrinsically safe areas requiring the use of ATEX approved equipment.
Suction range current output pressure transmitter for measuring from o to minus 10 mmHg gauge with a 4 to 20 milliamp output signal.
Compound range 4-20mA output pressure transmitter with a -1000 to + 1000 pascals gauge pressure range for use on dry gas.
Current output pressure sensor for use in hazardous areas with a vacuum measuring range from 0 to negative 25 millibar gauge.
ATEX certified intrinsically safe pressure transmitter for measuring from 0 to minus 10 millibar gauge vacuum pressure.
Vacuum sensor to measure negative gauge pressure from 0 to minus 100 millimeters of water gauge (mmWG) .
Vacuum transmitter for measuring 0 to minus 300 mmWC with a 4-20mA output signal suitable for connecting to a loop power supply of 24Vdc.
We are looking to measure Argon pressure in a pipe flow which should be in the range of 20 mbar above atmospheric.