This pressure sensor can be used in applications where it is necessary to ensure leaks are kept to an extremely low level and no contaminants are introduced when adding test instrumentation.
DMP335
600 barg 4-20mA output wastewater pressure sensor for experimental component testing
A high range gauge pressure sensor for experimental testing use to measure pressure of wastewater over a range of 0 to 600 bar g from the 1/4 NPT male process connection, and sending the corresponding 4-20mA signal through the DIN plug electrical connection.
200 barg 0-10Vdc out hydraulic control pressure sensor for agricultural machinery
A robust all welded stainless steel gauge pressure sensor for agricultural automation use to measure pressure of mineral hydraulic oil over a range of 0 to 200 bar g from the 1/4 NPT male process connection, and sending the corresponding 0-10Vdc signal through the DIN plug electrical connection.
600 barg 4-20mA pressure transducer for mobile crane hydraulic control use
A high gauge pressure transducer for hydraulic control use to measure pressure of mineral hydraulic oil on a mobile crane over a range of 0 to 600 bar abs from the 1/4 BSP P male process connection, and sending the corresponding 4-20mA signal through the DIN plug electrical connection.
6,000 psig ATEX/IECEx IS approved 4-20mA pressure sensor for oil pumping use
An intrinsically safe all welded stainless steel gauge pressure sensor for oil pumping use to measure pressure of pumped oil over a range of 0 to 6,000 psi g from the G1/2 male process connection, and sending the corresponding 4-20mA signal through the weatherproof cable electrical connection.
500 psig 4-20mA anhydrous ammonia pressure sensor for controlling refrigeration condenser fans and pumps
An all welded stainless steel pressure sensor for refrigeration condenser fan and pump control use to measure pressure of anhydrous ammonia (NH3) over a range of 0 to 500 psi g from the 1/4 NPT male process connection, and sending the corresponding 4-20mA signal through the DIN plug electrical connection.
300 barg 4-20mA synthetic hydraulic oil pressure transducer for hydraulic control use
An all welded high range pressure transducer for hydraulic control use to measure pressure of synthetic hydraulic oil over a range of 0 to 300 bar g from the G1/4 male process connection, and sending the corresponding 4-20mA signal through the M12 connector electrical connection.
150 psig 0-10Vdc output freon refrigerant gas pressure sensor for refrigeration control systems
An all welded stainless steel gauge pressure sensor for hvac use to measure pressure of freon refrigerant gas in refrigeration control systems over a range of 0 to 150 psi g from the 1/4 NPT male process connection, and sending the corresponding 0-10Vdc signal through the weatherproof cable electrical connection.
100psig range 4-20mA output helium gas pressure sensor for research use
A gauge range all welded stainless steel pressure sensor for research use to measure pressure of helium gas over a range of 0 to 100 psi g from the 1/4 NPT male process connection, and sending the corresponding 4-20mA signal through the M12 connector electrical connection.
Brake line pressure sensor to measure up to 4000 psi g with 0-10Vdc signal
Hydraulic pressure sensor for measuring up to 4000 pounds per square inch on a hydraulic brake line, and sending a 0 to 10 volts output signal to connected instrumentation.
3000 psig hydraulic press machine 4-20mA pressure sensor
All welded stainless steel 4 to 20 milliamp current output pressure sensor for monitoring the pressure generated by a hydraulic press machine rated up to 3000 psi gauge.
DMP 335 All Welded Stainless Steel Diaphragm Pressure Sensor
All welded stainless steel diaphragm pressure sensor for mobile hydraulics, refrigeration or oxygen applications. This pressure sensor is available in the ranges from 6 bar up to 600 bar gauge with a 4-20mA or 0-10Vdc output signal.