Digital communications protocol interface sensors protected from sustained immersion in liquid to prevent damage to internal sensor components, for measuring liquid level and converting it to a reading which can be transmitted using a digital communication link to other instrumentation.
Digital interfacing product information and help guides for connecting measurement instrumentation to a computer via a USB, RS232 or RS485 digital communication interface. Connect into your own digital sensor network or install provided software and data coms cable for monitoring readings in real time, logging data, plotting graphs or analysing measurement trends.
Low range digital interface submersible liquid level probe with RS 485 Modbus RTU protocol serial bus communications for measuring level of fuel, oil and wastewater in low fill height open tanks.
22mm diameter digital interface submersible liquid level probe with RS 485 Modbus RTU protocol serial bus communications for installing in 1″ diameter tubes to measure groundwater level and measuring wastewater with nose cone removed.
Digital submersible stainless steel liquid level sensor with a Modbus RTU protocol RS 485 serial bus interface.
Mobile network communications and multichannel sensor signal input conditioner for installing in remote above or underground locations without a nearby power source or signal cables.
We want a pressure sensor to fit to an air brake circuit of a truck which operates up to 8 bar. The pressure sensor will need to have a SAE J1939 vehicle bus interface in order to communicate with the transmission electronic control unit.
A low powered telemetry system water level sensor for submerging in irrigation water channels or storage dams and measuring the depth over a range of 0 to 10m from the nose cone, and sending the reading via a SDI-12 serial interface through the submersible cable electrical connection.
A data acquisition compatible level sensor for submerging in a lake stilling well and measuring the depth over a range of 0 to 3ft from the nose cone, and sending the corresponding reading via an SDI-12 serial interface through the submersible cable electrical connection.
An ultra high range digital pressure sensor for calibration use to measure pressure of hydraulic oil over a range of 0 to 70,000 psi g from the Autoclave F-250-C female process connection, and sending the corresponding pressure reading through USB interface to the PC monitoring and logging software.
A digital display, pressure sensor and digital interface module package for use on portable data acquisition trolleys to measure pressure of air over a range of -20 to 20 kPa diff from two 6.6mm dia x 11mm barbed hose connections, and sending the corresponding reading via a RS485 Modbus RTU interface through the terminal block connector electrical connections.
8 channel analogue signal to digital interface module for converting voltage or current signal inputs to a single RS-485 communication interface using Modbus RTU transmission protocol.
A computer data logging pressure sensor for hydroelectric penstock use to measure fluctuating pressures of freshwater over a range of 0 to 10 bar g from the G1/4 male process connection, and sending the corresponding reading through the USB interface via the weatherproof cable electrical connection.
A high range fast response digital pressure sensor for industrial robotic automation testing use to measure pressure of hydraulic pressure spikes over a range of 0 to 1,000 bar g from the G1/4 male process connection, and sending the corresponding USB signal through the USB mini B connector electrical connection.
A USB interface digital pressure sensor for fast reacting pressure relief device testing use to measure pressure of nitrogen gas over a range of 0 to 16 bar g from the G1/4 male process connection, and sending the corresponding signal through the USB mini B cable electrical connection.
High speed measurement reading response, Universal Serial Bus (USB) interface computer connection pressure sensing devices.
Low range pressure measurement Universal Serial Bus (USB) interface computer connection pressure sensing devices.
Universal Serial Bus (USB) interface computer connection
Universal Serial Bus (USB) interface computer connection pressure sensing devices
High range pressure measurement Universal Serial Bus (USB) interface computer connection pressure sensing devices
A submersible digital water depth sensor for submerging in a borehole and measuring the pump draw down depth over a range of 0 to 40m from the nose cone, and sending the corresponding RS485 Modbus RTU protocol coms through the submersible cable electrical connection.
USB ready digital pressure sensor for recording pressures with a high speed sample rate of up to 1 kHz to a computer. The UPS-HSR is supplied with a 2m long USB cable, PC software and case. Choose a pressure range from 2.5 bar up to 5000 bar with a G1/4 or 1/4 NPT male up to 1500 bar, and AE F-250-C female up to 5000 bar.
An absolute digital pressure sensor for measuring the pressure of air over a range of 0 to 10 bar absolute from the G1/4 male process connection, and sending the corresponding I2C interface through the weatherproof cable gland electrical connection.
A digital pressure sensor for component testing use to measure pressure of mineral hydraulic oil over a range of 0 to 10,000 psi g from the 1/4 BSP P male process connection, and sending the corresponding digital signal through the waterproof cable electrical connection.
A gauge pressure sensor for flow control use to measure pressure of air over a range of 0 to 10 bar g from the G1/2 male process connection, and sending the corresponding RS485 Modbus RTU signal through the integral cable electrical connection.
A hastelloy C276 wetted parts gauge pressure sensor for flow control use to measure pressure of seawater over a range of 0 to 60 bar g from the G1/2 male process connection, and sending the corresponding RS485 Modbus RTU signal through the integral cable electrical connection.
Digital interface logging pressure gauge for portable use in freshwater measurement applications, capable of measuring 0 to 200 bar sealed gauge pressure with 0.1% accuracy and connected using a G1/4 male fitting. Also includes USB, log software and traceable cal cert.
This low power consumption SDI-12 interface sensor will measure the water level of roadside creeks and streams to sense the level of flooding.
20 metre range level probe with an SDI-12 protocol serial digital interface for submerging near to the shore to monitor tidal changes.
SDI-12 data interface hydrostatic water level sensor for monitoring the depth of water in a Class A evaporation pan.
Digital pressure sensor with a 0…200 mbar gauge range for connecting at multiple points on one RS485 serial line.
Modbus RTU communications protocol RS485 serial interface, small diameter for water borehole immersion, hydrostatic pressure level sensor.
Connect a pressure gauge to a desktop or laptop computer via USB or RS232 serial bus connection.
RS485 output pressure sensors for incorporating into digital sensor networks. These sensors can be allocated a unique device address and connected in series to other sensors with RS-485 serial interfaces on the same communications link.
RS232 compatible pressure transducers for linking to PC computer serial ports which are provided with communications protocol commands for handshaking and retrieving sensor data, or a RS232 interface converter with a software program with features required for displaying, recording and analysing pressure readings.
PR 33X is a high resolution digital interface pressure sensor that can be hooked up to a Windows PC to display and log the pressure. The 33X uses a high resolution 16 bit analog to digital converter to process the signal generated by the pressure transducer, and therefore it is possible to detect very small variations in pressure.
The 36 X W is a high accuracy sensor with analogue 4-20mA / 0-10Vdc or digital RS485 output for submersing into a liquid to measure depth.
Digital output load reading pressure gauge for measuring the pressure generated by a benchtop hydraulic press and displaying readings in custom load units
Measurement instrumentation which can be connected via a USB, RS232 or RS485 digital interface communications.
This 4-20mA transmitter data-logging kit can be connected to any 4-20mA output sensor and generate a record of measurements collected at set time intervals.
The RAMPORT is a small and cost effective method of monitoring remote plant and equipment from any PC or internet enable terminal loaded with a standard web browser.
A wireless interface system for connecting battery powered sensors to a computer via a central receiver.
The DCT 531 digital pressure sensor has a Modbus RTU RS485 interface for transmitting pressure readings over a digital sensor network.
The DCT 533 digital pressure sensor has a IO-Link point-to-point communications interface for sending pressure readings to a IO-Link master.
The DCT532 I²C pressure sensor has a I²C serial computer bus protocol interface for sending pressure readings over addressable digital communications.
A guide to data loggers including explanations, applications and product selection guide for recording measurement data.
This guide will help you choose a digital output pressure sensor for your application and explain the benefits of using a digital interface to transmit pressure readings.
I need to measure pressure drop in a leaking system. The initial pressure is 3 bar and I need to measure the pressure drop over a few seconds
I’m looking for a 10 bar pressure sensor with high precision for calibration reference purposes
LEO Record combined digital manometer & pressure data logging instrument for recording pressures & temperatures that can store up to 57,000 readings.
High precision digital pressure gauge with an accuracy of 0.05% full scale in pressure ranges from 0…30 mbar up to 0…1000 bar.
We are looking for a pressure gauge which can be connected with a PC or laptop to record the pressure values directly.
The S12C is a submersible level probe with a SDI-12 protocol signal interface and has the option to measure absolute pressure rather than venting to air pressure above the water surface.
The 35X HTC high temperature digital pressure sensor is suited for media temperatures up to 300 °C
The ADT681 digital pressure gauge family covers a wide range of pressures from as low as 1 inH20 differential to as high as 36,000 psi gauge.
I am building a test station for leakage testing and need a digital pressure sensor for monitoring air pressure around 1 kPa for 30 sec.
The K-114B USB converter for Keller digital pressure sensors and instruments has replaced the now obsolete K-104B USB converter.
Pressure transducer which can be connected to a PC to use in-house to measure pressure decay
The DM01-500 HD high range pressure gauge is available in pressure ranges from 0 to 600, 1000, 1600, 2000 & 2200 bar.
The most popular device is the S12S submersible level transmitter with SDi-12 output, this can be supplied with various measurement ranges and cable lengths to suit the installation. There is also the S12C which is a ceramic based sensor with a Marine Bronze housing which is suitable for permanent submersion in estuary and seawater installations. […]
Digital pressure gauge with a range of around 0-20 bar that will plug into the PC via a USB port and include a program for logging.
USB interface IP68 pressure sensor to accurately indicate the depth and temperature of fresh water up to 10 metres water depth.
Digital pressure gauge with USB connection for plotting live readings up to 5000 psi on a PC.
Lake water level sensor for immersed installations to measure the quantity of water in a lake with a low power consumption SDI-12 interface.
Pressure transducer with USB connection and PC software for data acquisition of pressures from 0 to 1000 psi gauge.
I have a research problem where I need to detect leaks and obstructions in a pipe network
Digital pressure gauge with PC interface with digital output for displaying and logging pressure readings up to 10 bar g on a laptop computer in real time.
High precision digital pressure gauge with 0.05% full scale accuracy, exchangeable pressure range modules from 100 mbar (1.5 psi) up to 400 bar (6000 psi).
SDI-12 protocol transducer for sensing water depth level and temperature in seawater, brackish water, tidal water, saline water or leachate.
Combined pressure and temperature sensor with a 1200 baud rate serial data interface as defined by the SDI-12 support group.
Robust industrial self powered logger for recording up to 130,000 pressure values with a minimum logging interval time of 2 seconds.
LCD digital pressure gauge powered externally by a 2 wire series 4-20mA current loop or a digital interface.
Highly accurate digitally compensated pressure transducer with G1/2 male flush pressure port.
Digital pressure sensor with 3 separate channels for measuring P1, P2 and DP readings plus 2 temperature channels.
Low pressure sensor with a USB, RS232 or RS485 digital output interface for measuring low range gauge or differential pressures from 10 to 300 mbar.
Battery powered data logger for measuring and recording low range pressures. Pressure ranges from 30 mbar (12 inH2O) up to 300 mbar (120 inH2O).
High precision differential pressure transducer with accuracy of 0.1% full scale. Available with RS485, USB or RS232 for connecting to a computer.
High precision pressure transducer with an accuracy of 0.05% full scale with a RS485, USB or RS232 digital interface for connecting to a PC.
High accuracy desktop pressure gauge for calibration and metrology laboratories with an accuracy of ±0.03% FS covering pressure ranges from up to 400 bar.
Very highly accurate RS232 or RS485 serial interface pressure transducer with an accuracy of ±0.01% full scale achieved over pressure ranges up to 400 bar.
High precision RS232 or RS485 interface pressure sensor for use as a reference standard for calibration or research purposes.