Low range digital interface submersible liquid level probe with RS 485 Modbus RTU protocol serial bus communications for measuring level of fuel, oil and wastewater in low fill height open tanks.
Digital submersible stainless steel liquid level sensor with a Modbus RTU protocol RS 485 serial bus interface.
Sensor to measure differential pressure across fuel filters in an engine test cell on diesel and kerosene.
Diesel fuel oil storage tank device for measuring liquid level and converting it to an electrical signal to send to other instrumentation protected from diesel ingress when completely immersed in the fuel oil.
Diesel fuel oil storage tank device for measuring diesel fuel level and converting it to an electrical signal to send to other instrumentation.
A fuel tank mounted level sensor for measuring the height of diesel in a automatic diesel fire pump engine fuel tank over a range of 0 to 48in from the 1/4 BSP male process connection, and sending the corresponding 0-10Vdc signal through the weather proof cable electrical connection.
An externally mountable fuel level sensor for measuring the height of diesel in a horizontal cylindrical overground fuel tank over a range of 0 to 10ft from the G1/4 male process connection, and sending the corresponding low power consumption ratiometric 10-90% Vsupp signal through the flood proof IP68 cable electrical connection.
Low cost OEM diesel fuel or water level sensor for installing inside or outside a storage tank.
A HART coms enabled absolute pressure sensor for pipeline leak testing use to measure pressure of diesel over a range of 0 to 500 psi abs from the 1/2 NPT male process connection, and sending the corresponding 4-20mA signal through the mil-spec connector electrical connection.
A submersible liquid level sensor for submerging in a small diesel fuel tank and measuring the depth over a range of 0 to 50cm from the diaphragm behind the nose cone, and sending the corresponding 0.5-4.5Vdc signal through the submersible cable electrical connection.
A low range externally mounted liquid level sensor for measuring the height of diesel over a range of 0 to 4000 mm from the 1/4 NPT male process connection, and sending the corresponding 0-5Vdc signal through the DIN plug electrical connection.
Economical corrosion resistant ceramic diaphragm pressure sensor for measuring diesel tank level over a 60 ftH20 gauge pressure range and generating a 4 to 20 milliamps output signal.
Low cost stainless steel 316L submersible diesel level sensor with silicon strain gauge technology for measuring over a 2.5 mH2O gauge hydrostatic pressure range and sending out a 0 to 10 volts signal.
200 mbar range hydrostatic level sensor for measuring the quantity of generator fuel oil in a day tank.
Ship approved tank contents level sensor with adjustable range for measuring the amount of stored fuel.
Measure the level of Adblue® diesel exhaust fluid as part of a tank monitoring system used to support depots operating a fleet of diesel trucks.
The CNS is obsolete and no longer manufactured. As an alternative for your fuel oil application we would suggest a 1.6 metre range LMP307
What submersible pressure sensor would you suggest to measure a 40′ deep diesel storage tank?
Cost effective level sensor 0 – 2m, media is diesel fuel, output is 0-10V
The IMTG is specifically designed for large quantity OEM customers which manufacture and install content management systems for fuel storage tanks.
Cost effective pressure transducers to connect to data logger for diesel engine testing. These transducers can be used to measure the pressures of air, diesel, coolant and oil for testing purposes. The pressure transducers will accept a 5V excitation voltage and will produce a 0.5-4.5V out. IMP Low Cost Pressure Transducer Datum: Gauge (G) Pressure […]
Fuel oil pressure sensor with a 4-20mA current output and a submersible electrical connection for lowering inside a Diesel fuel storage tank to measure hydrostatic level of fuel oil up to 200 millbar.
Submersible diesel level pressure sensor for installing in the bottom of tanks up to 2 metres deep.
OEM fuel level sensor for diesel generators installed at telecom mobile cell tower sites.
Diesel fuel oil tank level sensor with 0 to 5 volt analog output signal for measuring contents in storage tanks up to 7 feet in height.
Combined digital pressure gauge and submersible level sensor for measuring the quantity of diesel or oil present inside industrial storage tanks up to 10 meters high.
IMTG is a low cost OEM submersible level transmitter which is typically used in applications that require diesel fuel level measurement in small tanks.
The IMTG is a submersible sensor that is specifically designed for diesel tank level measurement.
Hydrostatic type sensor for submerging inside Genset fuel tanks to measure the level of diesel
Economical pressure transducer for monitoring fluid level inside a tank where there is no external mounting point at the bottom of the tank.