Compound range intrinsically safe and SIL 2 approved pressure sensor for controlling the inert gas pressure in tanks containing flammable cargo.
A digital display, pressure sensor and digital interface module package for use on portable data acquisition trolleys to measure pressure of air over a range of -20 to 20 kPa diff from two 6.6mm dia x 11mm barbed hose connections, and sending the corresponding reading via a RS485 Modbus RTU interface through the terminal block connector electrical connections.
Low cost combined vacuum and pressure sensor for measuring over a -1 to +5 bar relative pressure range and generating a 4 to 20 milliamps output signal.
A high accuracy bidirectional range gauge pressure sensor for building management use to measure pressure of air intake and exhaust over a range of -2 to 2 inHg g from the 1/4 NPT male process connection, and sending the corresponding 4-20mA signal through the waterproof cable electrical connection.
A bidirectional low range pressure transmitter for venturi tube use to measure pressure of air in a venturi tube over a range of -200 to 200 Pa from the 6.6mm dia x 11mm barbed connections process connection, and sending the corresponding 4-20mA signal through the M12 x 1.5 cable glands with 5 internal screw terminals electrical connection.
A low range differential pressure sensor for process control use to measure pressure of biogas over a range of -3 to 4 mbar diff on a 1 bar biogas line from two 1/4 NPT female process connections, and sending the corresponding 4-20mA signal through the weatherproof cable electrical connection.
Positive and negative range pressure sensor for measuring liquid dispensing pressure over a -20 to +50 pounds per square inch gauge pressure range and generating a 0 to 10 volts output signal.
An intrinsically safe compound range pressure sensor for process control use to measure pressure of propane gas over a range of -1 to 20 bar g from the G1/4 male process connection, and sending the corresponding 4-20mA signal through the DIN plug electrical connection.
A high accuracy low bi-directional range differential pressure transmitter for water treatment use to measure pressure of air over a range of -3 to 3 psi differential from two 1/4”-18 NPT internal process connections, and sending the corresponding 4-20mA signal through the 1/2" NPT internal cable gland electrical connection.
A positive/negative gauge low range pressure sensor and digital display for pharmaceutical manufacturing use to measure pressure of air over a range of -0.1 to 0.1 inH2O g from the 6mm flexible tubing connection, and sending the corresponding 4-20mA signal through the M12 x 1.5 cable gland and internal screw terminal electrical connection.
Economical bidirectional low range stainless steel diaphragm pressure sensor with semiconductor strain gauges for measuring over a -5 to +5 psig psi gauge pressure range and generating a 0 to 5 volts output signal.
An intrinsically safe, marine approved compound range pressure transmitter for ship cargo tank IG system use to measure pressure of inert gas over a range of -10 to 30 kPa g from the G1/2 male process connection, and sending the corresponding 4-20mA signal through the DIN plug electrical connection.
A compound range differential pressure sensor for farming use to measure pressure of freshwater over a range of -1 to 6 bar diff on a 6 bar freshwater line from two G1/4 male process connections, and sending the corresponding RS485 Modbus RTU signal through the M12 connector electrical connection.
Low compound range OEM pressure sensor with semiconductor strain gauges for measuring over a -5 to +5 psi gauge pressure range and generating a 4 to 20 milliamps output signal.
Low compound range pressure sensor with semiconductor strain gauges for measuring over a -50 to +50 millibar gauge pressure range and generating a 0 to 10 volts output signal.
A compact size compound range pressure sensor for oem use to measure pressure of air over a range of -20 to 20 inH2O g from the 1/8 BSP P male process connection, and sending the corresponding 0-10Vdc signal through the M12 connector electrical connection.
A bi-directional compound range pressure sensor for research use to measure vacuum and pressure of air over a range of -15 to 15 psi g from the G1/4 male process connection, and sending the corresponding 4-20mA signal through the DIN plug electrical connection.
Compound range pressure transmitter for monitoring under pressure down to -10 millibar gauge and an over pressure of up to 200 millibar, with an output scaled from 4 to 20 milliamps with 4mA = -10mbar, and 20mA = +200mbar.
Differential pressure transmitter with a -100 to +100 Pascal range for measuring the difference in pressure between the inside and the outside of a room, in an ATEX zone.
Measure the air intake filter pressure difference on an industrial air compressor with this -100 to +100 mb range, 0 to 10 volt output differential pressure sensor.
Differential pressure transmitters to use on Nitrogen and/or air containing low levels of flammable solvents.
Compound range pressure transmitters for measuring plus and minus pressures using the same device.
High precision digital pressure gauge with an accuracy of 0.05% full scale in pressure ranges from 0…30 mbar up to 0…1000 bar.
Low range air pressure sensor for measuring -10 to +10 inH2O gauge compound pressure range.
DP pressure gauge with a bi-directional compound range of -2.5 to +2.5 mbar/-1 to +1 inH2O differential pressure range
LEO 2 battery powered digital manometer with pressure ranges from -1 to 3 bar up to 700 bar with an accuracy of 0.1% full scale with 6 pressure units, zero tare & peak hold display functions and optional ATEX approval for intrinsic safety.
Low compound range pressure sensor with a -1 to +1 inH2O measurement range and corresponding 4-20mA current output for use on air systems.
The ADT672 series of pressure calibrators are precision digital pressure gauges with electrical measurement for pressure transmitter calibration
The ADT681 digital pressure gauge family covers a wide range of pressures from as low as 1 inH20 differential to as high as 36,000 psi gauge.
Small manometer device with membrane protected against corrosive material (chemicals) and which we would prefer to be covered with Hastelloy steel.
Pressure transducer with an output voltage of 1-5V, able to withstand up to 150 C on the pressure side
Compound vacuum and pressure transmitter with HART compliant 4-20mA analog output and insertion type, bottom mounted, 1/2 NPT male process connection
I’m looking for a stick type pressure transmitter ranged -200mbarg to +200mbarg with a 4-20mA output, a 1/2″BSPT pressure connector and DIN43650 electrical connection, would you be able to help with this item? We would suggest the IMP-LR which is a low pressure transmitter which can be scaled as a compound range over the 4-20mA output span. […]
Three in one electronic pressure switch, digital pressure gauge and pressure sensor with pressure ranges from 100 mbar up to 600 bar (1.5 to 9000 psi).
Stainless steel pressure transmitter with ranges from 100mbar up to 40 bar gauge or absolute. Special options for ATEX , SIL2 and compound ranges.
Versatile low price pressure sensor with a wide selection of electrical and mechanical options for customisation.
Compound pressure ranges include both a positive and negative pressure range in one pressure measurement device.
Pressure transmitter with Marine type approvals and a compound pressure range of -1000 to +3000 mWG.
Bi-directional low range 4 to 20 milliamp differential pressure transmitter covering an air pressure range from -100 to +100 pascals.
Differential pressure transmitter with a signal & alarm warning output for measuring a compound scale from a vacuum of -2.5mbar to a pressure of 2.5mbar.
Compound range pressure sensor with a negative pressure range of 0 to minus 10 psi g and a positive pressure range of 0 to plus 5 psi g.
Cost effective pressure transducers to connect to data logger for diesel engine testing. These transducers can be used to measure the pressures of air, diesel, coolant and oil for testing purposes. The pressure transducers will accept a 5V excitation voltage and will produce a 0.5-4.5V out. IMP Low Cost Pressure Transducer Datum: Gauge (G) Pressure […]
Compound range transmitter for sensing pressure from -760 mm of mercury vacuum to 20 kilograms per sq cm positive pressure with HART communication. XMPi Compound HART Pressure Transmitter Pressure Range: -1 to +20 bar gauge Scaled Pressure Range: -760mmHg to +20 kg/cm² Electronics Housing: Aluminium die cast (standard) Pressure Connection: 1/2 NPT male Diaphragm Material: Stainless […]
Compound range ATEX pressure sensor for measuring -1 to +10 bar gauge in a hazardous zone.
Ammonia compatible pressure transmitter for measuring a compound range -0.5 to 5 bar gauge with a 4 to 20 milliamp current loop output.
Compound range pressure sensor for measuring a negative & positive gauge pressure of 30 inH2O
Autoclave pressure sensor for measuring vacuum and steam pressures from -0.9 to +2.2 bar gauge with a 0 to 10 volt output signal.
Compound range pressure transducer with a -1 to +2 bar gauge bi-directional range scaled over a 0 to 5 volt dc output signal.
Compound range pressure transducer for use on air with a 4 to 20 mA output scaled over a -0.5 to +4 bar gauge pressure range.
Rangeable high accuracy pressure transducer with a 0-10V output signal, a compound pressure range of -1 to +1 bar (-15 to +15 psi) gauge.
Differential pressure transmitter with indicator for measuring -15000 to +15000 pascals.
Compound range 4-20mA output pressure transmitter with a -1000 to + 1000 pascals gauge pressure range for use on dry gas.
-1 to 6 bar gauge compound range pressure transmitter with 4 to 20 milliamp output signal, built-in loop powered digital display.
I am looking for a differential digital manometer for reading up to 1000 pascals
I am looking for a 4-20mA output DP sensor with a -1 to 3 bar differential range for use on water. The sensor will need to withstand an overpressure of 20 bar on the positive side and 1.5 bar on the negative side.
In recent years regulations for environmental control, health and safety issues have become much more stringent for existing and new landfill sites. The regulations encompass many considerations and some involve the measurement and control of water level in many positions around a waste disposal site. One application is ensuring contaminated water is contained within a […]
All in one electronic switch, gauge and sensor designed specifically for use in the food, drink and biomedical industry for measuring process pressures.
Process transmitter for measuring vacuum, steam, food, pharmaceutical, oil, gas and other pressure readings necessary for the monitoring and control of bulk production processes.
LCD digital pressure gauge powered externally by a 2 wire series 4-20mA current loop or a digital interface.
Rangeable Pressure Transmitter with a hygienic all stainless steel construction with LCD digital readout display and optional HART communications.
Economically priced digital pressure gauge available in either a -1 to 30 bar or a 300 bar ranges with optional intrinsic safety.
High accuracy desktop pressure gauge for calibration and metrology laboratories with an accuracy of ±0.03% FS covering pressure ranges from up to 400 bar.
Battery powered digital gauge with an accuracy of 0.1% full scale in pressure ranges from -1 to 3 bar up to 1000 bar.
General purpose industrial pressure transmitter with a 4-20mA current loop or amplified voltage output available in range from -1 to +1 barg up to 500 barg