BD Sensors digital pressure switches offer reliable, precise switching for a variety of specialized applications.
BD Sensors
BD Sensors manufacture a range of low to medium range pressure & hydrostatic level sensors for highly corrosive media applications such as chemicals and sea-water, with ATEX and Marine approvals.
BD Differential Pressure Sensors
BD Sensors offers differential pressure sensors for gases and liquids. Choose from 4-20mA, HART, 0-10Vdc, RS485 outputs. Ideal for HVAC, labs, clean rooms, and process plants.
BD Sensors Screw-In Liquid Level Sensors
BD Sensors offers a wide range of screw-in liquid level sensors for various applications. Measure water, waste water, fuels, chemicals, and more. Materials and certifications available for specialized needs.
BD Sensors Submersible Liquid Level Probes
BD Sensors offers submersible liquid level probes for various liquids, including water, wastewater, fuels, and chemicals. IP68 rated, with material options for hygienic, marine, and harsh environments.
2m range 0.6% conc. chlorine liquid level sensor
Corrosion resistant liquid level sensor to measure up to 2m chlorine solution 0.6% conc.
Inward air-flow DP sensor with 1 sec response time
This DP sensor has response time of less than 5 milliseconds, and will measure the difference between the closed system and the surrounding air in both directions.
DCT531P RS485 Modbus RTU Flush Pressure Sensor
RS485 Modbus RTU serial interface pressure sensor with exposed all welded stainless steel 316L flush diaphragm in ranges from 100mb up to 40 bar gauge or absolute.
Industrial dishwasher 0-1m 0-10Vdc water level sensor
Compact and economically processed submersible hydrostatic pressure sensor, which can be submerged in or mounted externally to an industrial dishwashers integrated water tank.
LMK 858 Plastic Submersible Liquid Level Sensor with Removable Cable
Chemical resistant liquid level sensor with detachable signal cable for measuring quantity of aggressive media such acids and alkalis and sludge in tanks located outside of factory buildings.
LMK457 Marine Approved Level Transmitter
Marine approved level transmitter with 4-20mA current loop output for shipbuilding with optional all CuNiFe construction for sea-water compatibility in ranges from 0.4 mH2O to 250mH2O gauge.
DMP 336 Hydrogen (H2) Gas Compatible Pressure Transmitter
All stainless steel 316L welded wetted parts pressure transmitter for measuring hydrogen gas
DPT200 High One Side Overload Differential Pressure Sensor
DP transmitter for measuring pressure difference between two pressure points which can tolerate up a very high overload pressure independently on either the positive or negative side port or both together at the same time.
Potable water underground 10ft dia storage tank temperature and level sensor
measure the level and temperature of potable water in an underground water storage tank with a 10 ft diameter and a horizontal orientation.
Fleet management system submersible 3000mm height petrol tank level ATEX rated pressure sensor
ATEX rated submersible pressure sensor for fleet management system (FMS) petrol applications .
Helium leak tested & cleaned, all welded construction 100 psig pressure sensor
This pressure sensor can be used in applications where it is necessary to ensure leaks are kept to an extremely low level and no contaminants are introduced when adding test instrumentation.
Wind power barometric pressure visual monitor with alarm relay switches
Visual barometric pressure indicator and pressure sensor with opening and closing alarm relay switches for use in conjunction with safety shut down circuits for wind power installations.
DCL 551 RS485 Modbus RTU Submersible Low Range Fuel, Oil & Wastewater Level Probe
Low range digital interface submersible liquid level probe with RS 485 Modbus RTU protocol serial bus communications for measuring level of fuel, oil and wastewater in low fill height open tanks.
DCL 571 RS485 Modbus RTU Submersible 22mm dia Groundwater & Wastewater Level Probe
22mm diameter digital interface submersible liquid level probe with RS 485 Modbus RTU protocol serial bus communications for installing in 1″ diameter tubes to measure groundwater level and measuring wastewater with nose cone removed.
LMP305 Borehole Level Transmitter
Submersible stainless steel pressure transmitter ideal for geotechnical surveying with a 19mm diameter for measuring hydrostatic water level in bore-holes.
Borehole drawdown low voltage power supply 25m depth sensor
Low powered submersible level sensor with a 25 metre depth range, for use with a arduino controller to manage borehole drawdown and protect pump.
DCL 531 Modbus RTU RS 485 Submersible Stainless Steel Liquid Level Sensor
Digital submersible stainless steel liquid level sensor with a Modbus RTU protocol RS 485 serial bus interface.
Minus 30 inHg 4-20mA air pressure sensor for measuring vacuum in a sealed tank heated to 350F
A hi-temp media 200°C/392°F max gauge pressure sensor for measuring vacuum in a sealed tank heated to 350 degrees F over a range of 0 to -30 inHg g from the G1/2 male process connection, and sending the corresponding 4-20mA signal through the field housing electrical connection.
Engine test cell fuel filter 2.5 bar differential pressure sensor with ATEX approval
Sensor to measure differential pressure across fuel filters in an engine test cell on diesel and kerosene.
Cargo tank -100 to +300 mbar IS SIL2 approved pressure sensor
Compound range intrinsically safe and SIL 2 approved pressure sensor for controlling the inert gas pressure in tanks containing flammable cargo.
Hot leachate level transmitter for 20m deep well monitoring on landfill sites
Submersible level transmitter for well on a landfill site to monitor hot and aggressive leachate.
Email notifying multiple 4m high water tanks level controller
Multichannel display, controller and email notifier with submersible or external mounted 4m range water level sensor
Dairy 100 deg C wash water tank 2m range submersible level sensor
Device for level sensing in a wash water tank used for the dairy industry, which has a short term working temperature rating up to 100 deg Celsius.
Canola oil tank hygienic level sensor & indicator with high temperature protection
Instrument for measuring the level of a used Canola oil tank, and tolerate temperatures of up to 190 degrees Celsius.
Rupture disc maximum pressure test gauge
We are testing rupture disc assemblies for use in a product and we need to be able to verify the rupture pressure of the discs.
Ebb & Flow (Flood & Drain) Horticulture Hydroponic System 100mm Water Level Sensor
We are looking for a level sensor for measuring from 0 to 100mm of water height, in an ebb and flow horticulture hydroponic system used in greenhouses and indoor farms.
Theme park ride pneumatic controls digital pressure test gauge
High accuracy pressure gauge for portable use to check and test theme park ride pneumatic air control systems,
Bulk powders silo fluidisation blower aeration ATEX approved HART pressure transmitter
We are looking for a HART compatible ATEX dust approved pressure transmitter for measuring the outlet pressure on blowers used for silo fluidisation when discharging bulk powder.
LMK 487 Submersible Ballast Tank and Draught Level Pressure Transmitter
A 22mm diameter titanium body seawater depth and level probe with a 4-20mA output with Lloyds and DNV-GL ship approval, for monitoring the quantity of ballast or the draft of a ship’s hull.
Hydraulic puller-tensioner bar pressure to kilonewton load HMI display & logger
We are looking for an indicator with HMI software to show a machine operator the amount of force generated by a hydraulic puller-tensioner used for power line stringing.
Automatic fire pump engine 48 inch range 0-10Vdc output diesel tank level sensor
A fuel tank mounted level sensor for measuring the height of diesel in a automatic diesel fire pump engine fuel tank over a range of 0 to 48in from the 1/4 BSP male process connection, and sending the corresponding 0-10Vdc signal through the weather proof cable electrical connection.
Floating dry dock ballast tank 14ft range 4-20mA output submersible seawater level sensor
A seawater compatible liquid level sensor for submerging in a floating dry dock ballast tank and measuring the depth over a range of 0 to 14ft from the nose cone, and sending the corresponding 4-20mA signal through the submersible cable electrical connection.
NPSH 4-22 psia 4-20mA filtration pump suction port pressure sensor for water treatment
An absolute pressure sensor for water treatment pump chamber use to measure filtration pump NPSH pressure of freshwater over a range of 4 to 22 psi abs from the G1/4 male process connection, and sending the corresponding 4-20mA signal through the submersible cable electrical connection.
Filtered rainwater cistern 13ft range 4-20mA submersible drinking and cooking water level sensor
A drinking water approved submersible level sensor for submerging in a filtered rainwater cistern and measuring the depth over a range of 0 to 13ft from the nose cone, and sending the corresponding 4-20mA signal through the submersible cable electrical connection.
Cold isostatic press 5000 barg 0-10Vdc output high range freshwater pressure transducer
A high range pressure transducer for cold isostatic pressing use to measure pressure of freshwater over a range of 0 to 5,000 bar g from the 9/16 UNF female (AE HP type) process connection, and sending the corresponding 0-10Vdc signal through the DIN plug electrical connection.
4 x clean rooms pressure, humidity & temperature measurement system
A complete clean room measurement system for 4 separate rooms, each with its own room pressure, humidity and air temperature indicator, and a central monitoring unit for clean room corridor or control room.
Brewing tank 2000mm range 0-5Vdc output stainless steel 316L beer level sensor
A brewery grade externally mounted liquid level sensor for measuring the height of beer over a range of 0 to 2,000mm from the triclamp process connection, and sending the corresponding 0-5Vdc signal through the CIP cleaning proof cable electrical connection.
Dairy farm 6m high milk storage vat 4-20mA level transmitter
A food grade externally mounted dairy level transmitter for measuring the height of milk in farm storage vats over a range of 0 to 6m from the dairy pipe process connection, and sending the corresponding 4-20mA signal through the water proof cable electrical connection.
-5…+50degC temperature and 10m range level dual 4-20mA submersible borehole transmitter
A submersible water temperature and level measurement transmitter for submerging in a borehole and measuring temperature over -5 to +50C, and depth down to 10m, from the nose cone, and sending each measurement with a separate 4-20mA signal through the submersible cable electrical connection.
Ground water flooded pit 40mH2O 4-20mA output freshwater pressure sensor for water treatment use
A ground water flooded pit gauge pressure sensor for water treatment use to measure pressure of freshwater over a range of 0 to 40 mH2O g from the G1/4 male process connection, and sending the corresponding 4-20mA signal through the submersible cable electrical connection.
Portable data acquisition trolley +/-20 kPa dp RS485 Modbus RTU interface air pressure sensor and display package
A digital display, pressure sensor and digital interface module package for use on portable data acquisition trolleys to measure pressure of air over a range of -20 to 20 kPa diff from two 6.6mm dia x 11mm barbed hose connections, and sending the corresponding reading via a RS485 Modbus RTU interface through the terminal block connector electrical connections.
ELPO car paint plant 40ft high wastewater tank level transmitter
An externally mounted liquid level transmitter for measuring the height of wastewater from a electro-coat paint operation in a car paint plant over a range of 0 to 40ft from the G1 1/2 flush diaphragm process connection, and sending the corresponding 4-20mA signal through the weather proof cable electrical connection.
Grease trap waste receiving tank 2m range 4-20mA level transmitter
An externally mounted liquid level transmitter for measuring the height of wastewater in a grease trap waste receiving tank over a range of 0 to 2m from the G1 1/2 flush diaphragm process connection, and sending the corresponding 4-20mA signal through the DIN plug electrical connection.
Overground horizontal cylindrical 10ft dia diesel fuel tank level sensor with 10-90% Vs output
An externally mountable fuel level sensor for measuring the height of diesel in a horizontal cylindrical overground fuel tank over a range of 0 to 10ft from the G1/4 male process connection, and sending the corresponding low power consumption ratiometric 10-90% Vsupp signal through the flood proof IP68 cable electrical connection.
Drinking water approved 5ft range 4-20mA output submersible reservoir level sensor
A submersible water level sensor for submerging in a drinking water reservoir and measuring the depth over a range of 0 to 5ft from the nose cone, and sending the corresponding 4-20mA signal through the submersible cable electrical connection.
Nip roller 100 psi g 0-10Vdc output air pressure sensor for pressing laminated materials
A gauge pressure sensor for process control use to measure pressure of air on nip rollers over a range of 0 to 100 psi g from the 1/4 NPT male process connection, and sending the corresponding 0-10Vdc signal through the weatherproof cable electrical connection.
Ferry hull draft monitoring 3 bar absolute 4-20mA output seawater pressure sensor
An absolute pressure sensor for ship use to measure seawater depth on a ferry hull draft monitoring system over a range of 0 to 3 bar abs from the G1 1/2" process connection, and sending the corresponding 4-20mA signal through the waterproof cable electrical connection.
Oil field equipment testing 20,000 psi g 4-20mA out freshwater pressure sensor
An intrinsically safe ultra high range pressure sensor for oil field equipment testing use to measure pressure of freshwater over a range of 0 to 20,000 psi abs from the 1⁄4 HP Tube Fitting process connection, and sending the corresponding 4-20mA signal through the 6 pin bendix electrical connection.
Desalination plant seawater feed tanks 5m range 4-20mA output submersible level sensor
A marine approved submersible seawater level sensor for submerging in desalination plant water tanks and measuring the depth over a range of 0 to 5m from the nose cone, and sending the corresponding 4-20mA signal through the submersible cable electrical connection.
High temperature de-ionised water bath 300mm ATEX level sensor
Level sensor for high temperature liquids up to 125°C, ATEX approved intrinsically safe 4-20mA output and a low range to measure 0 to 300 millimetres.
17.620 G Low Cost Heavy Duty Compact OEM Hydraulic Pressure Sensor
Compact robust all welded stainless steel pressure sensor for heavy duty hydraulic system applications.
Food processing freshwater transfer pump 4 barg 4-20mA pressure sensor
A hygienic stainless steel flush diaphragm gauge pressure sensor for food processing pump transfer system to measure pressure of freshwater over a range of 0 to 4 bar g from the tri-clamp process connection, and sending the corresponding 4-20mA signal through the M12 connector electrical connection.
Natural gas buffer tank 5 barg 4-20mA output natural gas pressure transmitter
An intrinsically safe gauge pressure transmitter for natural gas buffer tank use to measure pressure of natural gas over a range of 0 to 5 bar g from the G1/4 male process connection, and sending the corresponding 4-20mA signal through the DIN plug electrical connection.
200 inch range 0-10Vdc output level sensor for soap water with up to 50% NaOH concentration
An externally mounted liquid level transducer for measuring the height of soap water solution with up to 50% NaOH concentration, over a range of 0 to 200in from the G1 1/2 male process connection, and sending the corresponding 0-10Vdc signal through the DIN plug electrical connection.
Contaminated groundwater submersible plastic body 5 psi pressure transducer & display
This submersible pressure transducer and display can be used by landfill site pump techs to read leachate water level above the transducer at the well head.
Burst pressure chamber gauge with 10 barg range and saved maximum reading
We are pressurizing a chamber with various materials spanning an opening and slowly increasing pressure until the material bursts. We need a gauge with a max pressure functionality.
40m RS485 Modbus RTU submersible borehole pump drawdown depth sensor
A submersible digital water depth sensor for submerging in a borehole and measuring the pump draw down depth over a range of 0 to 40m from the nose cone, and sending the corresponding RS485 Modbus RTU protocol coms through the submersible cable electrical connection.
18.605 G Low Cost Submersible Diesel Fuel and Water Tank Level Sensor
Low cost OEM diesel fuel or water level sensor for installing inside or outside a storage tank.
10ft range 4-20mA output submersible sea tide depth sensor
A submersible liquid depth sensor for submerging in the sea and measuring the tide depth over a range of 0 to 10ft from the nose cone, and sending the corresponding 4-20mA signal through the submersible cable electrical connection.
30 inHg low relative vacuum range digital display vacuum pressure gauge and logger
Digital display pressure gauge and logger for pipe mounted use in low relative vacuum measurement applications, capable of measuring 0 to -30 inches of mercury column g pressure with 0.1% accuracy and connected using a 1/4 NPT male fitting. Also includes USB interface, logging functionality and PC software.
85 psig range RS485 serial interface pressure sensor for heavy truck airbag suspension use
A high accuracy RS485 serial interface pressure sensor for compressed air use to measure heavy truck airbag suspension pressure over a range of 0 to 85 psi g from the 1/4 BSP P male process connection, and sending the corresponding RS485 signal through the weatherproof cable electrical connection.
65 inch range 4-20mA output intrinsically safe IBC tote wastewater level transmitter
An intrinsically safe externally mounted liquid level transmitter for measuring the height of wastewater over a range of 0 to 65in from the 1/2 NPT male process connection, and sending the corresponding 4-20mA signal through the M12 connector electrical connection.
150 psi absolute IS 4-20mA oxygen clean pressure transducer for research use
A oxygen clean intrinsically safe absolute pressure transducer for research use to measure pressure of oxygen over a range of 0 to 150 psi abs from the 1/4 NPT male process connection, and sending the corresponding 4-20mA signal through the DIN plug electrical connection.
7.5 psig RS485 Modbus RTU digital pressure sensor for leak testing use
A fine resolution digital pressure sensor for leak testing use to measure pressure of dried air or nitrogen in sealed steel tanks over a range of 0 to 7.5 psi g from the G1/4 male process connection, and sending the corresponding RS485 Modbus RTU signal through the weatherproof cable electrical connection.
20 barg 4-20mA output 200degC steam pressure sensor for process control use
A hi-temp media 200°C/392°F max gauge pressure sensor for process control use to measure pressure of steam over a range of 0 to 20 bar g from the 1/2 BSP flush diaphragm male process connection, and sending the corresponding 4-20mA signal through the M12 connector electrical connection.
700 psig 0.05% accuracy air and freshwater pressure gauge with 1/4 NPT male fitting
Digital display pressure gauge for use on air and freshwater measurement applications, capable of measuring 0 to 700 psi g pressure with 0.05% accuracy and connected using a 1/4 NPT male fitting.
600 barg 4-20mA output wastewater pressure sensor for experimental component testing
A high range gauge pressure sensor for experimental testing use to measure pressure of wastewater over a range of 0 to 600 bar g from the 1/4 NPT male process connection, and sending the corresponding 4-20mA signal through the DIN plug electrical connection.
600 barg freshwater booster pump pressure switch, gauge and transmitter
Digital display pressure switch, gauge and transmitter for pipe mounted use in freshwater booster pump measurement applications, capable of measuring 0 to 600 bar g pressure with 0.35% accuracy and connected using a 1/4 BSP P male fitting.
-2 to 2 inHg g 4-20mA out intake and exhaust air pressure sensor for building management use
A high accuracy bidirectional range gauge pressure sensor for building management use to measure pressure of air intake and exhaust over a range of -2 to 2 inHg g from the 1/4 NPT male process connection, and sending the corresponding 4-20mA signal through the waterproof cable electrical connection.
1000 barg 4-20mA output synthetic oil pressure sensor for hydraulic pump controls
A high range pressure sensor for hydraulic pump use use to measure pressure of synthetic hydraulic oil over a range of 0 to 1,000 bar g from the G1/2 male process connection, and sending the corresponding 4-20mA signal through the DIN plug electrical connection to a microprocessor.
1600 barg 4-20mA freshwater pressure sensor for hydrostatic testing
A high range gauge pressure sensor for hydrostatic pressure testing use to measure pressure of freshwater over a range of 0 to 1,600 bar g from the 9/16 UNF process connection, and sending the corresponding 4-20mA signal through the DIN plug electrical connection.
-3 to 4 mbar dp range 4-20mA ATEX approved biogas pressure sensor for process control use on a 1bar line
A low range differential pressure sensor for process control use to measure pressure of biogas over a range of -3 to 4 mbar diff on a 1 bar biogas line from two 1/4 NPT female process connections, and sending the corresponding 4-20mA signal through the weatherproof cable electrical connection.
15 psig leak testing air pressure gauge with 1/4 NPT male fitting
Digital display pressure gauge for portable use in air pressure leak test applications, capable of measuring 0 to 15 psi g pressure with 0.05% accuracy and connected using a 1/4 NPT male fitting.
200 barg 0-10Vdc out hydraulic control pressure sensor for agricultural machinery
A robust all welded stainless steel gauge pressure sensor for agricultural automation use to measure pressure of mineral hydraulic oil over a range of 0 to 200 bar g from the 1/4 NPT male process connection, and sending the corresponding 0-10Vdc signal through the DIN plug electrical connection.
3m range 4-20mA submersible freshwater tank level sensor for dust suppression systems
A submersible liquid level sensor for submerging in a dust suppression system freshwater tank and measuring the depth over a range of 0 to 3m from the flush diaphragm, and sending the corresponding 4-20mA signal through the submersible cable electrical connection.
3000 psia high accuracy 0-10Vdc out pressure sensor for leak checking pressurized tanks
A high accuracy absolute high range pressure sensor for pressurized tank leak testing use to measure pressure of freshwater over a range of 0 to 3,000 psi absolute from the 1/4 NPT male process connection, and sending the corresponding 0-10Vdc signal through the waterproof cable electrical connection.
20 bar absolute low response time 4-20mA output dynamic freshwater pressure sensor for research use
A low response time absolute pressure sensor for research use to measure pressure of freshwater over a range of 0 to 20 bar abs from the G1/4 male process connection, and sending the corresponding 4-20mA signal through the M12 connector electrical connection.
40 bar absolute 0-20mA output air pressure sensor for pneumatic monitoring
An absolute pneumatic pressure monitoring sensor for compressed air use to measure pressure of air over a range of 0 to 40 bar abs from the 1/4 BSP P male process connection, and sending the corresponding 0-20mA signal through the weatherproof cable electrical connection.
600 barg 4-20mA pressure transducer for mobile crane hydraulic control use
A high gauge pressure transducer for hydraulic control use to measure pressure of mineral hydraulic oil on a mobile crane over a range of 0 to 600 bar abs from the 1/4 BSP P male process connection, and sending the corresponding 4-20mA signal through the DIN plug electrical connection.
30 psi absolute portable calibration data logging air pressure gauge with 1/4 NPT male fitting
Digital display pressure gauge for portable calibration use in air measurement applications, capable of measuring 0 to 30 psi abs pressure with 0.1% accuracy and connected using a 1/4 NPT male fitting. Also includes USB, logger, and data transfer software.
120cm range 4-20mA submersible chemical tank level sensor for farm water line mineral injection
A plastic submersible liquid level sensor for submerging in a chemical tank used for injecting minerals into water lines on farms, and measuring the depth over a range of 0 to 120 cm from the nose cone, and sending the corresponding 4-20mA signal through the submersible cable electrical connection.
500 psi absolute range HART enabled 4-20mA output diesel pressure sensor for pipeline leak testing use
A HART coms enabled absolute pressure sensor for pipeline leak testing use to measure pressure of diesel over a range of 0 to 500 psi abs from the 1/2 NPT male process connection, and sending the corresponding 4-20mA signal through the mil-spec connector electrical connection.
1 barg IS certified 4-20mA submersible leachate pressure sensor for tank level gauging use
An intrinsically safe submersible wastewater gauge pressure sensor for tank level gauging use to measure pressure of leachate over a range of 0 to 1 bar g from the G1/2 male process connection, and sending the corresponding 4-20mA signal through the submersible cable electrical connection.
3 psig range 4-20mA output natural gas pressure sensor for building boiler heating use
A low range gauge pressure sensor for building system boiler heating use to measure pressure of natural gas over a range of 0 to 3 psi g from the G1/4 male process connection, and sending the corresponding 4-20mA signal through the M12 connector electrical connection.
10m range high resolution 4-20mA out submersible freshwater tank level sensor
A high resolution submersible water level sensor for submerging in a freshwater tank and measuring the depth over a range of 0 to 10m from the flush diaphragm, and sending the corresponding 4-20mA signal through the submersible cable electrical connection.
10m high chemical tank 4-20mA output submersible PVC and ceramic protected liquid level sensor
A submersible PVC and ceramic based construction liquid level sensor for submerging in a gravity drained or pumped liquid chemical tank and measuring the depth over a range of 0 to 10m from the nose cone, and sending the corresponding 4-20mA signal through the submersible cable electrical connection.
6,000 psig ATEX/IECEx IS approved 4-20mA pressure sensor for oil pumping use
An intrinsically safe all welded stainless steel gauge pressure sensor for oil pumping use to measure pressure of pumped oil over a range of 0 to 6,000 psi g from the G1/2 male process connection, and sending the corresponding 4-20mA signal through the weatherproof cable electrical connection.
5 metre range high accuracy 4-20mA output non-corrosive liquid level sensor with G1/4 male external fitting
A high accuracy externally mounted liquid level sensor for measuring the height of non-corrosive liquids over a range of 0 to 5m from the G1/4 male process connection, and sending the corresponding 4-20mA signal through the weatherproof cable gland electrical connection.
280 inch range 4-20mA output urea tank flush diaphragm level sensor
An externally mounted tank level sensor for measuring the height of urea over a range of 0 to 280in from the G3/4 male DIN3852 with flush diaphragm process connection, and sending the corresponding 4-20mA signal through the flood proof cable electrical connection.
DCT143 IO-Link Interface Mobile Hydraulics OEM Short Length Pressure Sensor
All welded stainless steel IO-Link interface pressure sensor with a low profile for use by mobile hydraulics manufacturers to measure hydraulic pressures up to 600 bar or 9000 psi.
-1 to 20 bar g compound range IS 4-20mA propane pressure sensor for process control use
An intrinsically safe compound range pressure sensor for process control use to measure pressure of propane gas over a range of -1 to 20 bar g from the G1/4 male process connection, and sending the corresponding 4-20mA signal through the DIN plug electrical connection.
20 MPa g range 4-20mA output high pressure sensor and plug-on display for hydraulic control use
A high pressure sensor and plug-on display for hydraulic control use to measure pressure of mineral hydraulic oil over a range of 0 to 20 MPa g from the G1/8 male process connection, and sending the corresponding 4-20mA current loop signal through the DIN plug connector electrical connection.
10 bar absolute I2C interface air pressure sensor
An absolute digital pressure sensor for measuring the pressure of air over a range of 0 to 10 bar absolute from the G1/4 male process connection, and sending the corresponding I2C interface through the weatherproof cable gland electrical connection.
150 psig RS485 Modbus RTU chilled water pressure sensor for supply and return monitoring
A digital interface pressure sensor for flow monitoring use to measure pressure of chilled water supply & return over a range of 0 to 150 psi g from the 1/4 NPT male process connection, and sending the corresponding RS485 Modbus RTU protocol interface through the weatherproof cable electrical connection.
-15psig 0-10V out negative pressure transducer and display for air extraction use
A digital display pressure transducer for air extraction use to measure negative pressure difference of air inlet over a range of 0 to -15 psi g from a 1/4 NPT male process connection, and sending the corresponding 0-10Vdc signal through the DIN plug electrical connection.
16 inch range 4-20mA output submersible shallow water tank level sensor
A low range submersible liquid level sensor for submerging in a shallow water tank and measuring the depth over a range of 0 to 16in from the flush open face diaphragm, and sending the corresponding 4-20mA signal through the submersible cable electrical connection.