An externally mounted tank level sensor for measuring the height of urea over a range of 0 to 280in from the G3/4 male DIN3852 with flush diaphragm process connection, and sending the corresponding 4-20mA signal through the flood proof cable electrical connection.
A low range hi-temp media 150°C/302°F protected max gauge pressure sensor for tank level gauging use to measure pressure of oily wastewater over a range of 0 to 10 psi g from the 1/4 NPT male process connection, and sending the corresponding 4-20mA signal through the weatherproof cable electrical connection.
A submersible pressure sensor for underwater research use to measure pressure of freshwater over a range of 0 to 10 psi g from the 1/4 NPT male process connection, and sending the corresponding 4-20mA signal through the submersible cable electrical connection.
Hydrostatic liquid level pressure sensor with semiconductor strain gauges for measuring over a 0 to 7 mH2O gauge pressure range and generating a 4 to 20 milliamps output signal.
Hygienic liquid level sensor for mounting to the side of a beverage tank used to store beer, wine, spirits or cider.
0…7 mH2O or 0…23 ftH2O liquid level range, 4…20 mA, 0…10 V, or 0…5 V output signal hydrostatic liquid level sensors.
0…700 mbar or 0…10 psi pressure range, 0…10 V, 0…5 V, or 1…5 V output signal pressure sensors.
HART communications enabled 4-20mA output hydrostatic level sensor with a range of 0 to 7 metres of water column.
0…700 mbar, 0…10 psi, 0…280 inH2O, or 0…70 kPa pressure range, 4…20 mA output signal pressure sensors.
Compound range pressure sensor with a negative pressure range of 0 to minus 10 psi g and a positive pressure range of 0 to plus 5 psi g.
Stainless steel 316L flush diaphragm pressure sensor for measuring up to 10 psi gauge. This sensor has a 4 to 20 milliamp current output and a 1inch BSP male screw-in port.
DP transmitter that can be used to measure the pressure drop over 0 to 300 inH2O of gas flow through an orifice plate