We are looking for an indicator with HMI software to show a machine operator the amount of force generated by a hydraulic puller-tensioner used for power line stringing.
A high range gauge pressure sensor for experimental testing use to measure pressure of wastewater over a range of 0 to 600 bar g from the 1/4 NPT male process connection, and sending the corresponding 4-20mA signal through the DIN plug electrical connection.
Digital display pressure switch, gauge and transmitter for pipe mounted use in freshwater booster pump measurement applications, capable of measuring 0 to 600 bar g pressure with 0.35% accuracy and connected using a 1/4 BSP P male fitting.
A high gauge pressure transducer for hydraulic control use to measure pressure of mineral hydraulic oil on a mobile crane over a range of 0 to 600 bar abs from the 1/4 BSP P male process connection, and sending the corresponding 4-20mA signal through the DIN plug electrical connection.
A high range pressure transmitter for hydraulic control use to measure pressure of mineral hydraulic oil on mobile rail vehicle systems over a range of 0 to 600 bar g from the G1/2 male process connection, and sending the corresponding 0-20mA signal through the DIN plug electrical connection.
The Gefran KX pressure sensor is ATEX Ex nA non-sparking approved for use in zone 2 hazardous areas with flammable gas or dust atmospheres, and is SIL 2 approved for additional safety. The KX is available in ranges from -1 to 1 bar up to 1000 bar.
Economical corrosion resistant ceramic diaphragm pressure sensor for measuring over a 600 bar gauge pressure range and generating a 2 millivolt per volt output signal.
0…600 bar or 0…9000 psi pressure range, 0…10 V, 0…5 V, or 1…5 V output signal pressure sensors.
0…600 bar, 0…9000 psi, 0…600 kg/cm2, or 0…60 MPa pressure range, 4…20 mA output signal pressure sensors.
The Gefran KS Series is a small size oil free all stainless steel pressure sensor with SIL2 certification for incorporating into the design of industrial automation machinery. The KS compact SIL2 approved pressure sensor is available in ranges from 0-1 bar up to 0-1000 bar gauge
The Gefran KH mobile hydraulics pressure sensor is a low cost compact stainless steel high pressure sensor for use in large quantity OEM applications on mobile vehicles. The KX is available in ranges from 4 bar / 60 psi up to 1000 bar / 15000 psi.
The Gefran KX pressure sensor is ATEX approved for use with intrinsic safety barriers in hazardous areas, and is SIL 2 approved for additional safety. The KX is available in ranges from -1 to 1 bar up to 1000 bar.
High pressure range sensors with a measurement range from 0 to 600 bar, 9000 psi, or 60 MPa.
The TPFAS pressure sensor has a small size flush diaphragm which allows the use of a smaller size G1/4 (1/4 BSP) or M10 x 1 male thread for fitting where there is limited room or access to the process measurement point.
High pressure transducer for pressure testing applications with pressure ranges from 0…4 bar (60 psi) up to 0…1000 bar (15,000 psi) gauge with a measurement accuracy of 0.1%.
Contactless zero tare & span adjustment high pressure transmitter with 4-20mA current loop or amplified voltage output signal in pressure ranges from 50 bar up to 1000 bar gauge.
Flush diaphragm pressure transmitter for high viscosity media in food processing and plastic injection moulding applications.
Flush diaphragm piezo-resistive pressure sensor for food processing and plastic injection moulding applications with a millivolt output signal in pressure ranges from 10 up to 1000 barg.
Strain gauge pressure sensor with a millivolt output direct from a four arm wheatstone bridge strain gauge circuit in pressure ranges from 10 up to 1000 bar gauge.