A high accuracy RS485 serial interface pressure sensor for compressed air use to measure heavy truck airbag suspension pressure over a range of 0 to 85 psi g from the 1/4 BSP P male process connection, and sending the corresponding RS485 signal through the weatherproof cable electrical connection.
A hi-temp media 200°C/392°F max absolute pressure sensor for process control use on solar thermal system to measure pressure of freshwater over a range of 0 to 6 bar abs from the G1/2 male process connection, and sending the corresponding 0-10Vdc signal through the DIN plug electrical connection.
Digital display pressure gauge for pipe mounted use in applications to monitor blowing of rupture disks, capable of measuring 0 to 500 kPa g pressure with 0.05% accuracy and connected using a 1/2 NPT male fitting. Also includes USB, logger, peak hold, log software and traceable cal cert.
A compound range differential pressure sensor for farming use to measure pressure of freshwater over a range of -1 to 6 bar diff on a 6 bar freshwater line from two G1/4 male process connections, and sending the corresponding RS485 Modbus RTU signal through the M12 connector electrical connection.
A high viscosity fluid absolute pressure sensor with hi-temp media 150°C/302°F max protection for research use to measure pressure of epoxy resin over a range of 0 to 6 bar abs from the G1/2 male with flush diaphragm process connection, and sending the corresponding 4-20mA signal through the integral cable electrical connection.
0…60 mH2O or 0…200 ftH2O liquid level range, 4…20 mA, 0…10 V, or 0…5 V output signal hydrostatic liquid level sensors.
0…6 bar or 0…90 psi pressure range, 0…10 V, 0…5 V, or 1…5 V output signal pressure sensors.
0…6 bar, 0…90 psi, 0…6 kg/cm2, or 0…600 kPa pressure range, 4…20 mA output signal pressure sensors.
Pressure sensor and remote LED display for installing on a truck to monitor air cushion pressure during loading of a vehicle.
Pressure transmitter for high temperature UHT milk up to 180°C with 6 bar pressure range and ½ inch fitting process connection
We are looking for a solution to monitor water network pressure changes to detect leakage in a short time period.
DM01 precision pressure gauge with a KHP35 pneumatic calibration pump to calibrate air pressure gauges, ranging to 60psi with NPT fittings.
We are looking for marine certified pressure transmitters which will be used in a water reclamation system. The current pressure transmitters we use are a ceramic type and they are loading up internally and producing a false pressure reading inside the process connection. I feel the flush diaphragm will stop this and make the unit a […]
Combined submersible pressure sensor and temperature sensor for sitting beside a submersible pump at 60 metres depth.
Electronic pressure switch with 2 programmable switch outputs, an integrated display and a front flush diaphragm to measure be set over the range of 0…6bar.
High temperature hygienic air pressure sensor for use on an industrial popcorn maker.
Marine certified 4 to 20 milliamp output pressure transmitter with a 0 to 6 bar gauge pressure range for use on liquids.
DNV and GL marine certified 4 to 20 milliamp output pressure transmitter for measuring 0 to 6 bar pressure on lubrication oil pumps.
Seawater compatible submersible pressure sensor with a 0 to 5 volts output signal for measuring sea water depth down to 60 metres (200 feet).
-1 to 6 bar gauge compound range pressure transmitter with 4 to 20 milliamp output signal, built-in loop powered digital display.