A marine approved submersible seawater level sensor for submerging in desalination plant water tanks and measuring the depth over a range of 0 to 5m from the nose cone, and sending the corresponding 4-20mA signal through the submersible cable electrical connection.
An externally mounted liquid level transducer for measuring the height of soap water solution with up to 50% NaOH concentration, over a range of 0 to 200in from the G1 1/2 male process connection, and sending the corresponding 0-10Vdc signal through the DIN plug electrical connection.
A fine resolution digital pressure sensor for leak testing use to measure pressure of dried air or nitrogen in sealed steel tanks over a range of 0 to 7.5 psi g from the G1/4 male process connection, and sending the corresponding RS485 Modbus RTU signal through the weatherproof cable electrical connection.
A high accuracy externally mounted liquid level sensor for measuring the height of non-corrosive liquids over a range of 0 to 5m from the G1/4 male process connection, and sending the corresponding 4-20mA signal through the weatherproof cable gland electrical connection.
OEM compound low range gauge pressure sensor with semiconductor strain gauges for measuring over a -0.5 to +0.5 bar gauge pressure range and generating a 0 to 5 volts output signal.
Low cost stainless steel 316L submersible liquid level sensor with silicon strain gauge technology for measuring over a 7.5 psi gauge hydrostatic pressure range and sending out a 0 to 5 volts signal.
A submersible saltwater level sensor for submerging in a seawater intake channel and measuring the depth over a range of 0 to 5m from the nose cone, and sending the corresponding 4-20mA signal through the submersible cable electrical connection.
Absolute vacuum pressure gauge for portable use in air measurement applications, capable of measuring 0 to 50 kPa abs pressure with 1% accuracy and connected using a 1/4 NPT male fitting.
Digital display pressure gauge with 4-20mA output for pipe mounted use in refrigeration coolant measurement applications, capable of measuring 0 to 500 mbar g pressure with 1% accuracy and connected using a G1/2 male fitting.
Economical stainless steel diaphragm pressure sensor with semiconductor strain gauges for measuring over a 0 to 500 mbar gauge pressure range and generating a 4 to 20 milliamps output signal.
We have an installation which involves measuring equipment in a tidally inundated tunnel. We need to know if there is water in the tunnel and the height and temperature of the water.
Hygienic liquid level sensor and wall mounted digital display unit for measuring contents of a dairy silo in litres.
0…5 mH2O or 0…16 ftH2O liquid level range, 4…20 mA, 0…10 V, or 0…5 V output signal hydrostatic liquid level sensors.
0…500 mbar or 0…7.5 psi pressure range, 0…10 V, 0…5 V, or 1…5 V output signal pressure sensors.
0…500 mbar, 0…7.5 psi, 0…200 inH2O, or 0…50 kPa pressure range, 4…20 mA output signal pressure sensors.
Submersible level sensor with a flush ceramic sensing diaphragm which is ideal for use on sewage wastewater
Small manometer device with membrane protected against corrosive material (chemicals) and which we would prefer to be covered with Hastelloy steel.
Compound vacuum and pressure transmitter with HART compliant 4-20mA analog output and insertion type, bottom mounted, 1/2 NPT male process connection
I need to measure the difference in depth upstream and downstream of a freshwater weir with a maximum depth of 5 meters. Please suggest a low cost sensor with a low resolution output which can be used on many sites. The IMTG is a low cost hydrostatic pressure sensor which has been designed specifically for […]
We are currently working on a project to enable remote monitoring of water tank level. We need a stand alone remote tank monitoring system for 10 water tanks where an alarm can be transmitted once certain levels are reached, which then transmits to a remote monitoring station over the internet. Would you have a solution […]
Absolute pressure and temperature recording device that measures a tenth of a millibar up to 500 mbar.
Vacuum pressure transmitter for vacuum conveying systems to measure 0 to -500 mbar vacuum.
Pressure sensor for measuring leachate in a holding tank which has a ATEX rated 4-20mA output and a range from 0 to 5 meters sensing depth plus 10m of cable.
Food compatible vacuum pressure sensor useful for pressure from 0 to minus 50 kilopascals.
OEM fuel level sensor for diesel generators installed at telecom mobile cell tower sites.
Two wire vacuum transmitter for occasional use on fresh water with 0 to -500mbar gauge range, 1/4″BSP male thread and a 24Vdc supply powered 4-20mA output.
Lake water level sensor for immersed installations to measure the quantity of water in a lake with a low power consumption SDI-12 interface.
SDI-12 digital output submersible sensor for use in fresh water with a range between 0 and 5 metres of water column.
The IMTG is a submersible sensor that is specifically designed for diesel tank level measurement.