Pressure sensor that can be easily interfaced with a computer to log results for a PASS/FAIL pressure leak test to 500 kPa and monitored for a pressure drop over a 5-10 minute time period
An intrinsically safe gauge pressure transmitter for natural gas buffer tank use to measure pressure of natural gas over a range of 0 to 5 bar g from the G1/4 male process connection, and sending the corresponding 4-20mA signal through the DIN plug electrical connection.
Wireless pressure measurement kit for district heating monitoring use with a 5barg range plus a 1/4 BSP male fitting. Each pressure reading is transmitted wirelessly to a five channel base receiver, where it is converted to a 1-5Vdc or 4-20mA analogue output signal.
Wireless pressure measurement kit for pneumatic monitoring and testing use with a 75psig range plus a 1/4 NPT male fitting. Each pressure reading is transmitted wirelessly to a single channel base receiver, where it is converted to a 1-5Vdc or 4-20mA analogue output signal.
Low cost combined vacuum and pressure sensor for measuring over a -1 to +5 bar relative pressure range and generating a 4 to 20 milliamps output signal.
A high temperature media protected pressure sensor for steam sterilizing use to measure pressure of steam over a range of 0 to 5 bar g from the G1/4 male process connection, and sending the corresponding 4-20mA signal through the DIN plug electrical connection.
Digital display pressure gauge for pipe mounted use in applications to monitor blowing of rupture disks, capable of measuring 0 to 500 kPa g pressure with 0.05% accuracy and connected using a 1/2 NPT male fitting. Also includes USB, logger, peak hold, log software and traceable cal cert.
A marine approved gauge pressure sensor for sea level measuring use to measure pressure of seawater over a range of 0 to 5 bar g from the G1/4 male process connection, and sending the corresponding 4-20mA signal through the submersible electrical connection.
A food grade gauge pressure sensor for water treatment use to measure pressure of freshwater over a range of 50 to 70 psi g from the triclamp process connection, and sending the corresponding 0-10Vdc signal through the M12 connector electrical connection.
All titanium underwater sensor for measuring seawater depth with a measurement range of 0 to 50 metres providing a 4 to 20 mA output signal.
0…50 mH2O or 0…160 ftH2O liquid level range, 4…20 mA, 0…10 V, or 0…5 V output signal hydrostatic liquid level sensors.
0…5 bar or 0…75 psi pressure range, 0…10 V, 0…5 V, or 1…5 V output signal pressure sensors.
0…5 bar, 0…75 psi, 0…5 kg/cm2, or 0…500 kPa pressure range, 4…20 mA output signal pressure sensors.
Modbus RTU communications protocol RS485 serial interface, small diameter for water borehole immersion, hydrostatic pressure level sensor.
Borehole water level transducer for lowering into a borehole to measure the changing water level, and determine the recharge rate.
Intrinsically safe pressure transmitter, 0 to 500 kpa a, 1/2 BSP male, media temp –40 to 125°C, ATEX approval, stainless steel and output range 4-20ma
I’m interested in a reliable, low-cost, pressure transducer for a simple irrigation application with a 0 to 5 volts dc output, 0 to 5 bar gauge pressure range, cable electrical termination and compatibility with fresh water. I would appreciate it if you could suggest a possible solution. We would suggest the IMP which is very low […]
Pressure transmitter with an integral LED loop powered digital display for use with hot oil up to 300 deg. C (max.) over a pressure range of 0-5 bar gauge.
2 wire 4-20mA submersible pressure transmitter for use in potable water for measuring depth from 0 to 50 meters with a 60 meter length of vented cable.
Ammonia compatible pressure transmitter for measuring a compound range -0.5 to 5 bar gauge with a 4 to 20 milliamp current loop output.
Immersed liquid level sensor for use with borehole pumps to protect from dry running.
Methyl Ethyl Ketone solvent compatible pressure transmitter with a 0-5V dc analogue output for measuring pressures from 0 to 5 bar gauge.
SDI-12 digital interface liquid level and temperature sensor for submerging in seawater water to depth of up to 50 metres.