Multichannel display, controller and email notifier with submersible or external mounted 4m range water level sensor
I’m looking for an instrument for measuring the level of a used Canola oil tank, where it will need to tolerate temperatures of up to 190 degrees Celsius for a period of no more than 30 minutes. The temperature then drops down to ambient, because the oil is hot when it is transferred from the […]
A seawater compatible liquid level sensor for submerging in a floating dry dock ballast tank and measuring the depth over a range of 0 to 14ft from the nose cone, and sending the corresponding 4-20mA signal through the submersible cable electrical connection.
A drinking water approved submersible level sensor for submerging in a filtered rainwater cistern and measuring the depth over a range of 0 to 13ft from the nose cone, and sending the corresponding 4-20mA signal through the submersible cable electrical connection.
A low range externally mounted liquid level sensor for measuring the height of diesel over a range of 0 to 4000 mm from the 1/4 NPT male process connection, and sending the corresponding 0-5Vdc signal through the DIN plug electrical connection.
Low cost stainless steel 316L submersible liquid level sensor with silicon strain gauge technology for measuring over a 4 mH2O gauge hydrostatic pressure range and sending out a ratiometric 0.5 to 4.5 volts signal.
Economical stainless steel diaphragm pressure sensor with semiconductor strain gauges for measuring over a 0 to 400 mbar gauge pressure range and generating a 0 to 10 volts output signal.
Flush ceramic diaphragm pressure sensor for measuring level of a dirty water, sludge & sewerage tank.
0…4 mH2O or 0…13 ftH2O liquid level range, 4…20 mA, 0…10 V, or 0…5 V output signal hydrostatic liquid level sensors.
0…400 mbar or 0…6 psi pressure range, 0…10 V, 0…5 V, or 1…5 V output signal pressure sensors.
Battery supplied digital readout display for sensing the absolute pressure of a vacuum below 400 mbar.
0…400 mbar, 0…6 psi, 0…160 inH2O, or 0…40 kPa pressure range, 4…20 mA output signal pressure sensors.
HART compatible, ATEX flameproof approved, rangeable level transmitter to measure hydrostatic head of water/glycol or mineral oil fluid within a reservoir about 2 metres in height.
We are looking to measure level of water in a cold water storage tank with a fully immersible water level sensor. The sensor needs to have a 0-10 volt output, a 0 to 4 metre range and a 15 metre length of cable. What sensor would be suitable for our requirement? We would suggest the […]
Vented pressure river level sensor for measuring water level up to 0.4 bar in run-of-the-river hydroelectricity systems. This water head level sensor can be placed inside a stilling tube and submerged in a river to monitor the depth of the hydro-electric turbine intake below the water surface. The sensor has a 4-20mA output signal and a polyurethane […]
Submersible pressure sensor for measuring up to 4 metres of fresh water depth with a 2 wire 4 to 20 milliamp current loop output.
0 to 10 volts dc output absolute pressure transducer for measuring 0 to 300 millimetres of Mercury.