High accuracy pressure gauge for portable use to check and test theme park ride pneumatic air control systems,
A ground water flooded pit gauge pressure sensor for water treatment use to measure pressure of freshwater over a range of 0 to 40 mH2O g from the G1/4 male process connection, and sending the corresponding 4-20mA signal through the submersible cable electrical connection.
A hygienic stainless steel flush diaphragm gauge pressure sensor for food processing pump transfer system to measure pressure of freshwater over a range of 0 to 4 bar g from the tri-clamp process connection, and sending the corresponding 4-20mA signal through the M12 connector electrical connection.
A submersible digital water depth sensor for submerging in a borehole and measuring the pump draw down depth over a range of 0 to 40m from the nose cone, and sending the corresponding RS485 Modbus RTU protocol coms through the submersible cable electrical connection.
I am looking for a temperature/pressure sensor or transmitter and digital readout. Pressure range required is 0-60psi and the temperature range required is 0-80C.
Economical corrosion resistant ceramic diaphragm pressure sensor with G1/4 female process connection for measuring over a 0 to 4 bar gauge pressure range and generating a 4 to 20 milliamps output signal.
A high temperature protected absolute pressure sensor for steam sterilizing use to measure pressure of steam over a range of 0.0 to 4.0 bar abs from the 1/4 BSP P male process connection, and sending the corresponding 4-20mA signal through the Hirschman electrical connection.
Digital display pressure gauge for portable use in pharmaceutical measurement applications, capable of measuring 0 to 60 psi g pressure with 0.5% accuracy and connected using a triclamp fitting. Also includes a 0-10Vdc output, hygienic fitting and cal cert.
A hi-temp media 150°C/302°F max gauge pressure sensor for research use to measure pressure of humidified gases over a range of 0 to 4 bar g from the 1/4 NPT male process connection, and sending the corresponding 0-5Vdc signal through the DIN plug electrical connection.
Digital display pressure gauge for portable use in manufacturing acceptance testing applications, capable of measuring over -10 to 50 psi gauge pressure with 0.1% accuracy and connected using a 1/4 NPT male fitting. Also includes a USB cable, cal pump, log software and UKAS cal cert.
Low cost stainless steel 316L borehole water level sensor with silicon strain gauge technology for measuring over a 0 to 150 ftH2O gauge hydrostatic pressure range and sending out a 0 to 5 volts signal.
0…40 mH2O or 0…130 ftH2O liquid level range, 4…20 mA, 0…10 V, or 0…5 V output signal hydrostatic liquid level sensors.
0…4 bar or 0…60 psi pressure range, 0…10 V, 0…5 V, or 1…5 V output signal pressure sensors.
0…4 bar, 0…60 psi, 0…4 kg/cm2, or 0…400 kPa pressure range, 4…20 mA output signal pressure sensors.
Seawater compatible high accuracy differential pressure transmitter with an accuracy of 0.15% FS over a operating temperature range of -10 to 80°C
Flush diaphragm pressure gauge with switch contacts for measuring pressures of toner used in printers and copiers from 5 to 60 psi.
0-10Vdc output pressure transducer for measuring Nitrogen gas pressure in the range of 0 to 4 bar gauge.
Compound range pressure transducer for use on air with a 4 to 20 mA output scaled over a -0.5 to +4 bar gauge pressure range.
Battery powered instrument for recording pressure from 0 to 4 bar absolute over a period of 1 month, print history of measurements showing trend curves.
Screw-in G1/2 threaded flush diaphragm pressure transmitter with a 0 to 60 psi gauge range
0 to 4 bar range digital pressure gauge with 1/4 bsp male thread fitting for direct mounting
We need a hydrostatic level transmitter for immersion under sea water.
The steam pressure range will be from 0 to 4 kg/cm2g and the temperature range will be 0-150 degC. Is there a product available which can do this?