This submersible pressure transducer and display can be used by landfill site pump techs to read leachate water level above the transducer at the well head.
0…350 mbar or 0…5 psi pressure range, 0…10 V, 0…5 V, or 1…5 V output signal pressure sensors.
0…350 mbar, 0…5 psi, 0…140 inH2O, or 0…35 kPa pressure range, 4…20 mA output signal pressure sensors.
A digital display combine with a rangeable externally mounted liquid level sensor for measuring the height of wastewater over a range of 0 to 140in from the 1/4 NPT male process connection, and sending the corresponding 4-20mA signal through the M12 connector electrical connection.
Economical bidirectional low range stainless steel diaphragm pressure sensor with semiconductor strain gauges for measuring over a -5 to +5 psig psi gauge pressure range and generating a 0 to 5 volts output signal.
A combined digital display and low range gauge pressure transducer for water purifier use to measure pressure of freshwater over a range of 0 to 5 psi g from the 1/2 NPT male process connection, and sending the corresponding 0-10Vdc signal through the DIN plug electrical connection.
A low range differential pressure sensor for manufacturing automation flow rate testing use to measure pressure of air over a range of 0 to 5 psi diff on a 15 psi air line from two G1/8 female process connections, and sending the corresponding 0-10Vdc signal through the integral cable electrical connection.
Low compound range OEM pressure sensor with semiconductor strain gauges for measuring over a -5 to +5 psi gauge pressure range and generating a 4 to 20 milliamps output signal.
A gauge pressure sensor for air blowing use to measure pressure of air over a range of 0 to 5 psi g from the 1/4 NPT male process connection, and sending the corresponding 0-5Vdc signal through the integral cable electrical connection.
0…3.5 mH2O or 0…11 ftH2O liquid level range, 4…20 mA, 0…10 V, or 0…5 V output signal hydrostatic liquid level sensors.
Hydrostatic level sensor with a 4-20mA output for screw on thread mounting and measuring the level of ink in a 12 foot high tank.
5 psi gauge pressure range, 4-20 milliamp current output pressure sensor for measuring the pressure in a steam boiler.
Measure the level of Adblue® diesel exhaust fluid as part of a tank monitoring system used to support depots operating a fleet of diesel trucks.
We are looking for a submersible rainwater tank level sensor. However there is a limited budget, so price is an important consideration. The specification we require is approximately 3.5 metres maximum water depth (0.35 bar), 4-20mA output, 15 volt supply, typically 0.5% accuracy or better, medium will be rain water and a cable 5 metres […]
I would like to drop a sensor into a stilling chamber and measure the water depth along with the water temperature if possible.
Compound range pressure sensor with a negative pressure range of 0 to minus 10 psi g and a positive pressure range of 0 to plus 5 psi g.
Pressure sensor that can be used can be immersed in sewage to measure level up to 5 psi gauge.
Delta pressure transducer for low range air pressure up to five psi with a zero to ten volt output signal.
Delta pressure transmitter for low range air pressure up to five psi with a four to twenty milliamp current loop output.